XAircraft X650 Value (4 motors , Carbon Firber)

SKU: ROB0093 Brand: DFRobot

Retired Product

Search for an alternative
This product has been retired. It is no longer available, but this page has been kept for reference.

Introduction

XAircraft X650 is a remote control multi-rotor mini helicopter designed for the model aircraft enthusiasts, the energy of which is provided by lithium battery, the thrust of which is provided by propellers direct-driven from four brushless motors. Compared with traditional helicopters, the X650 is more intelligent, simpler in structure, lower in maintenance cost and failure rate. When equipped with a camera or other video device, the X650 will be ideal platform for first person flight (FPV) to bringing you a brand-new flying experience. 
 
X650V-4 has greater payload capability for Point and Shoot Cameras and Mini HD Camcorders ALSO with more flight time! More stable in higher winds using our NEW Lower Pitch Props and flying with Higher RPMs. New landing gear with good malleability can absorb more shock while landing.
 
X650V8 has all the outstanding characteristic of X650V4 - it has adopted the same fuselage, flight control, brushless motor, ESC and propeller as X650V4. The only difference is that X650V8 has 8 brushless motors and thus can provide stronger load capacity. X650 V4 users only need to order 4 brushless motors, 4 ESC and 4 propellers to upgrade X650 V to X650 V8 immediately! Of course,  Value-8 can also be downgraded to Value-4. In this way, it can help save electricity and give more flight time.
 
Optional: Adjustable mounting for camera mount and battery mount. With better view angle for AP/AV, and easily adjustable Center of Gravity for the whole machine
 
 
X650 Value-8 standard configuration
  • 1x X650 V4 frame and Landing gear 
  • 4x New Outrunner brushless motor
  • 4x 10A brushless ESC
  • 4x 10" Positive-propeller 
  • 1x XAircraft FC1212-S Flight controller 
  • 1x XAircraft AHRS-S Attitude sensors 
  • 1x XAircraft USB-Link to PC line
  • 1x XAircraft Debugging software
 
Documents
 
Optional parts(not included)
  • 1x XAircraft GPS+Compass (E1012+E1013)
  • 1x CMGOPRO-TP(For Hero Gopro) or CM130C-TPS(For Card Camera) 2-axis Camera Mount
 
Items not included but necessary
  • More than 6 channel radio control
  • 3S or 4S/20C/2200~5000mah LI-PO Battery

This product is listed in:

Retired

Product Comments

Exact shipping can be calculated on the view cart page (no login required).

Products that weigh more than 0.5 KG may cost more than what's shown (for example, test equipment, machines, >500mL liquids, etc).

We deliver Australia-wide with these options (depends on the final destination - you can get a quote on the view cart page):

  • $3+ for Stamped Mail (typically 10+ business days, not tracked, only available on selected small items)
  • $6+ for Standard Post (typically 6+ business days, tracked)
  • $10+ for Express Post (typically 2+ business days, tracked)
  • Pickup - Free! Only available to customers who live in the Newcastle region (must order online and only pickup after we email to notify you the order is ready). Orders placed after 2PM may not be ready until the following business day.

Non-metro addresses in WA, NT, SA & TAS can take 2+ days in addition to the above information.

Some batteries (such as LiPo) can't be shipped by Air. During checkout, Express Post and International Methods will not be an option if you have that type of battery in your shopping cart.

International Orders - the following rates are for New Zealand and will vary for other countries:

  • $11+ for Pack and Track (3+ days, tracked)
  • $16+ for Express International (2-5 days, tracked)

If you order lots of gear, the postage amount will increase based on the weight of your order.

Our physical address (here's a PDF which includes other key business details):

Unit 18, 132 Garden Grove Parade
Adamstown
NSW, 2289
Australia

Take a look at our customer service page if you have other questions such as "do we do purchase orders" (yes!) or "are prices GST inclusive" (yes they are!). We're here to help - get in touch with us to talk shop.

Have a product question? We're here to help!

Write Your Own Review

Guides

The Maker Revolution

The Maker Revolution celebrates the creation of new devices and the modification of existing ones - ...
The Maker Revolution celebrates the creation of new devices and the modification of existing ones - ...

Projects

Raspberry Pi Video Looper Display Installation | Overshare Video Festival

IntroductionA suspended ceiling display of forty repurposed screens and displays, each screening cr...
IntroductionA suspended ceiling display of forty repurposed screens and displays, each screening cr...

Mailbox Delivery Notification System

Introduction During the Covid lockdown, I needed something to do. The Postman or woman does not de...
Introduction During the Covid lockdown, I needed something to do. The Postman or woman does not de...

PiicoDev Schematic System

Introduction: Hi everybody. Over the past few weeks, I have been working on an intuitive system th...
Introduction: Hi everybody. Over the past few weeks, I have been working on an intuitive system th...
Feedback

Please continue if you would like to leave feedback for any of these topics:

  • Website features/issues
  • Content errors/improvements
  • Missing products/categories
  • Product assignments to categories
  • Search results relevance

For all other inquiries (orders status, stock levels, etc), please contact our support team for quick assistance.

Note: click continue and a draft email will be opened to edit. If you don't have an email client on your device, then send a message via the chat icon on the bottom left of our website.

Makers love reviews as much as you do, please follow this link to review the products you have purchased.