Home
Shop
Retired
Waveshare 7.3 Inch E-Paper HAT (800x400 pixels, Red/Yellow/Black/White)

Add to Wish List

Skip to the beginning of the images gallery

Waveshare 7.3 Inch E-Paper HAT (800x400 pixels, Red/Yellow/Black/White)

SKU: WS-22772 Brand: Waveshare

Retired Product

Replaced by: WS-27875

This product has been replaced by: WS-27875
This product is no longer available. This page is only for reference.

Details

7.3inch e-Paper HAT (G), 800 × 480, Red/Yellow/Black/White

7.3" e-Paper HAT (G)

low power, wide viewing angle, paper-like effect without electricity

Ideal for price tags, shelf labels, industrial instruments...

Size7.3"
Resolution800×480
Viewing Angle>170°
Display ColorRed/Yellow/Black/White
Grey Scale2

CommunicationSPI
Display PanelE-paper
ExperiencePaper-like
EnvironmentAmbient Light Required
Display TypePassively Reflective

Features at a glance

No backlight, keeps displaying last content for a long time even when power down
Ultra low power consumption, basically power is only required for refreshing
Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
SPI interface, for connecting with controller boards like Raspberry Pi/Jetson Nano/Arduino/STM32, etc.
Onboard voltage translator, compatible with 3.3V/5V MCUs
Comes with development resources and manual(driver board schematic, examples for Raspberry Pi/Arduino/STM32)

Specifications

operating voltage	3.3V/5V	display color	Red/Yellow/Black/White
interface	3-wire SPI, 4-wire SPI	grey scale	2
outline dimensions	170.2 × 111.2mm	full refresh time	16s
display size	160 × 96mm	refresh power	<85mW (typ.)
DOT PITCH	0.2 × 0.2 mm	standby current	<0.01uA (almost none)
RESOLUTION	800×480 pixels	viewing angle	>170°

Advantages of EINK

E-paper display utilizes microcapsule electrophoretic technology for displaying, the principle is: charged particles suspended in clear fluid will move to sides of microcapsule when electric field is applied, making the microcapsule become visible by reflecting ambient light, just as traditional printed paper.
E-paper display will clearly display images/texts under lamplight or natural light, requires no backlight, and features nearly up to 180° viewing angle. It is usually used as e-reader due to its paper-like effect.

Standard Raspberry Pi 40PIN GPIO Header

Compatible With Raspberry Pi Series Boards, Jetson Nano

Onboard SPI Control Interface

For Use With Controller Boards Like Raspberry Pi/STM32/Arduino

VCC	Power (3.3V / 5V input)
GND	Ground
DIN	SPI MOSI pin
CLK	SPI SCK pin
CS	SPI chip selection, low active
DC	Data/Command selection (high for data, low for command)
RST	External reset, low active
BUSY	Busy status output pin

Application examples

Suitable for price Tags, asset/equipment Tags, shelf labels, conference name tags...

Outline dimensions

Resources & Services

WIKI: www.waveshare.com/wiki/7.3inch_e-Paper_HAT_(G)

* Resources for different product may vary, please check the wiki page to confirm the actually provided resources.

Selection Guide

Part Number	Colors	Grey Scale	Resolution	Display size (mm)	Outline Dimension (mm)	Full Refresh Time (s)	Partial Refresh¹	Pi Head-er²	Flexi-ble	Interface
1.02inch e-Paper Module	black, white	2	128×80	21.76 × 14.00	42.0 × 27.0	2	v			SPI
1.54inch e-Paper Module	black, white	2	200×200	27.60 × 27.60	48.0 × 33.0	2	v			SPI
1.54inch e-Paper Module (B)	red, black, white	2	200×200	27.60 × 27.60	48.0 × 33.0	14				SPI
1.54inch e-Paper Module (C)	yellow, black, white	2	152×152	27.51 × 27.51	48.0 × 33.0	27				SPI
1.64inch e-Paper Module (G)	red, yellow, black, white	2	168×168	29.568 × 29.568	47 × 38	12				SPI
2.13inch e-Paper HAT	black, white	2	250×122	48.55 × 23.70	65.0 × 30.2	2	v	v		SPI
2.13inch e-Paper HAT+	black, white	2	250×122	48.55 × 23.70	65.0 × 30.5	2	v	v		SPI
2.13inch e-Paper HAT (B)	red, black, white	2	250×122	48.55 × 23.70	65.0 × 30.2	15		v		SPI
2.13inch e-Paper HAT (C)	yellow, black, white	2	212×104	48.55 × 23.70	65.0 × 30.2	15		v		SPI
2.13inch e-Paper HAT (D)	black, white	2	212×104	48.55 × 23.70	59.2 × 29.2	2	v	v	v	SPI
2.13inch e-Paper HAT (G)	red, yellow, black, white	2	250×122	48.55 × 23.70	65.0 × 30.2	25		v		SPI
2.13inch Touch e-Paper HAT	black, white	2	250×122	48.55 × 23.70	69.15 × 38.90	2	v	v		SPI
2.13inch Touch e-Paper HAT (with case)	black, white	2	250×122	48.55 × 23.70	72.20 × 41.90	2	v	v		SPI
2.15inch e-Paper HAT+ (B)	red, black, white	2	296×160	48.10 × 26.00	65.0 × 34.0	23		v		SPI
2.15inch e-Paper HAT+ (G)	red, yellow, black, white	2	296×160	48.10 × 26.00	65.0 × 34.0	20		v		SPI
2.36inch e-Paper Module (G)	red, yellow, black, white	2	296×168	52.096 × 29.568	69.5 × 38.5	12				SPI
2.66inch e-Paper Module	black, white	2	296×152	30.704 × 60.088	37.0 × 83.5	6	v			SPI
2.66inch e-Paper Module (B)	red, black, white	2	296×152	30.704 × 60.088	37.0 × 83.5	15				SPI
2.66inch e-Paper Module (G)	red, yellow, black, white	2	360×184	60.05 × 30.69	85.0 × 38.5	26				SPI
2.7inch e-Paper HAT	black, white	4	264×176	57.29 × 38.19	85.0 × 56.0	6	v	v		SPI
2.7inch e-Paper HAT (B)	red, black, white	2	264×176	57.288 × 38.192	73.5 × 56.0	15		v		SPI
2.9inch e-Paper Module	black, white	4	296×128	66.89 × 29.05	89.5 × 38.0	3	v			SPI
2.9inch e-Paper Module (B)	red, black, white	2	296×128	66.89 × 29.05	89.5 × 38.0	15				SPI
2.9inch e-Paper Module (C)	yellow, black, white	2	296×128	66.89 × 29.05	89.5 × 38.0	15				SPI
2.9inch e-Paper HAT (D)	black, white	2	296×128	66.90 × 29.06	79.0 × 36.7	2	v	v	v	SPI
2.9inch Touch e-Paper HAT	black, white	4	296×128	66.89 × 29.05	89.10 × 42.70	3	v	v		SPI
3inch e-Paper Module (G)	red, yellow, black, white	2	400×168	70.4 × 29.568	88.5 × 41	12				SPI
3.52inch e-Paper HAT	black, white	2	360×240	74.51 × 49.67	86.5 × 57	1.5		v		SPI
3.52inch e-Paper HAT (B)	red, black, white	2	360×240	74.51 × 49.67	86.5 × 57	16		v		SPI
3.7inch e-Paper HAT	black, white	4	480×280	47.32 × 81.12	58.0 × 96.5	3	v	v		SPI
4inch e-Paper HAT+ (E)	E6 full color	2	600×400	84.6 × 56.40	101.00 × 68.00	19		v		SPI
4.01inch e-Paper HAT (F)	7-Color	2	640×400	86.40 × 54.00	98.5 × 70.0	30		v		SPI
4.2inch e-Paper Module	black, white	4	400×300	84.80 × 63.60	103.0 × 78.5	5	v			SPI
4.2inch e-Paper Module (B)	red, black, white	2	400×300	84.80 × 63.60	103.0 × 78.5	15				SPI
4.2inch e-Paper Module (G)	red, yellow, black, white	2	400×300	84.80 × 63.60	103.0 × 78.5	21				SPI
4.26inch e-Paper HAT	black, white	4	800×480	92.80 × 55.68	107.0 × 64.0	4	v	v		SPI
4.3inch e-Paper UART Module	black, white	4	800×600	88.00 × 66.00	118.0 × 75.0	1.5				UART
4.37inch e-Paper Module (G)	red, yellow, black, white	2	512×368	90.11 × 64.77	101.5 × 81.5	14				SPI
5.65inch e-Paper Module (F)	7-Color	2	600×448	114.9 × 85.8	138.5 × 100.5	<35				SPI
5.79inch e-Paper Module	black, white	4	792×272	139.00 × 47.74	152.50 × 58.50	3.5	v			SPI
5.79inch e-Paper Module (B)	red, black, white	2	792×272	139.00 × 47.74	152.50 × 58.50	24				SPI
5.79inch e-Paper Module (G)	red, yellow, black, white	2	792×272	139.00 × 47.74	152.50 × 58.50	21				SPI
5.83inch e-Paper HAT	black, white	2	648×480	119.232 × 88.320	125.4 × 99.5	5		v		SPI
5.83inch e-Paper HAT (B)	red, black, white	2	648×480	119.232 × 88.320	125.4 × 99.5	20		v		SPI
6inch e-Paper HAT	black, white	16	800×600	122.4 × 90.6	138.4 × 101.8	<1	v	v		USB/SPI/ I80
6inch HD e-Paper HAT	black, white	16	1448×1072	122.4 × 90.6	138.4 × 101.8	<1	v	v		USB/SPI/ I80
7.3inch E-Paper HAT (E)	E6 full color	2	800×480	160 × 96	170.2 × 111.2	12		v		SPI
7.3inch E-Paper HAT (F)	7-Color	2	800×480	160 × 96	170.2 × 111.2	35		v		SPI
7.3inch E-Paper HAT (G)	red, yellow, black, white	2	800×480	160 × 96	170.2 × 111.2	16		v		SPI
7.5inch e-Paper HAT	black, white	4	800×480	163.20 × 97.92	170.2 × 111.2	4	v	v		SPI
7.5inch HD e-Paper HAT	black, white	2	880×528	163.24 × 97.94	170.2 × 111.2	5		v		SPI
7.5inch e-Paper HAT (B)	red, black, white	2	800×480	163.20 × 97.92	170.2 × 111.2	26	v	v		SPI
7.5inch HD e-Paper HAT (B)	red, black, white	2	880×528	163.24 × 97.94	170.2 × 111.2	21		v		SPI
7.5inch e-Paper HAT (C)	yellow, black, white	2	640×384	163.20 × 97.92	170.2 × 111.2	16		v		SPI
7.8inch e-Paper HAT	black, white	16	1872×1404	158.18 × 118.64	173.8 × 127.6	<1	v	v		USB/SPI/ I80
9.7inch e-Paper HAT	black, white	16	1200×825	202.8 × 139.43	218.8×156.4	<1	v	v		USB/SPI/ I80
10.3inch e-Paper HAT	black, white	16	1872×1404	209.66 × 157.25	216.7 × 174.4	<1	v	v		USB/SPI/ I80
10.3inch e-Paper HAT (D)	black, white	16	1872×1404	209.66 × 157.25	227.7 × 165.8	<1	v	v	v	USB/SPI/ I80
10.3inch e-Paper HAT (G)	black, white	16	1872×1404	209.66 × 157.25	225.70 × 183.40	<1	v	v		USB/SPI/ I80
12.48inch e-Paper Module	black, white	2	1304×984	252.98 × 190.90	280.0 × 229.5	<8		v		SPI
12.48inch e-Paper Module (B)	red, black, white	2	1304×984	252.98 × 190.90	280.0 × 229.5	37		v		SPI
13.3inch e-Paper HAT	black, white	16	1600×1200	270.40 × 202.80	285.80 × 213.65	<1	v	v		USB/SPI/ I80
13.3inch e-Paper HAT (B)	red, black, white	2	960×680	275.52 × 195.16	286.32 × 212.26	22	v	v		SPI
13.3inch e-Paper HAT (K)	black, white	4	960×680	275.52 × 195.16	286.32 × 212.26	5	v	v		SPI
13.3inch e-Paper HAT (E)	E6 full color	2	1600×1200	270.40 × 202.80	284.70 × 208.80	19		v		SPI

It usually takes about 0.3s for partial refresh
Pi Header: standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards

Weight: 0.061 kg

Quick Overview

7.3inch e-Paper (G) x1
Driver Board and FFC cable x1
PH2.0 20cm 8Pin x1

This product is listed in:

Retired

Product Comments

Start the conversation

Exact shipping can be calculated on the view cart page (no login required).

Products that weigh more than 0.5 KG may cost more than what's shown (for example, test equipment, machines, >500mL liquids, etc).

We deliver Australia-wide with these options (depends on the final destination - you can get a quote on the view cart page):

$3+ for Stamped Mail (typically 10+ business days, not tracked, only available on selected small items)
$7+ for Standard Post (typically 6+ business days, tracked)
$11+ for Express Post (typically 2+ business days, tracked)
Pickup - Free! Only available to customers who live in the Newcastle region (must order online and only pickup after we email to notify you the order is ready). Orders placed after 2PM may not be ready until the following business day.

Non-metro addresses in WA, NT, SA & TAS can take 2+ days in addition to the above information.

Some batteries (such as LiPo) can't be shipped by Air. During checkout, Express Post and International Methods will not be an option if you have that type of battery in your shopping cart.

International Orders - the following rates are for New Zealand and will vary for other countries:

$12+ for Pack and Track (3+ days, tracked)
$16+ for Express International (2-5 days, tracked)

If you order lots of gear, the postage amount will increase based on the weight of your order.

Our physical address (here's a PDF which includes other key business details):

40 Aruma Place
Cardiff
NSW, 2285
Australia

Take a look at our customer service page if you have other questions such as "do we do purchase orders" (yes!) or "are prices GST inclusive" (yes they are!). We're here to help - get in touch with us to talk shop.

Have a product question? We're here to help!