A real stand with sponge and double spring prevents your iron from 'rolling away' or burning a hole in the table. If you're starting out and have a 'pen type' soldering...

Multicore TTC-LF is a handy, non-abrasive, solder iron tip tinner. Easily wets hot solder irons leaving a brightly tinned tip. Improves hand soldering efficiency...

Easy to use dry soldering iron tip cleaner.

This combination solder roll holder and soldering iron stand will keep your soldering iron off your working surface & your solder within easy reach. Accepts 200g and 1kg rolls of solder. Can be mounted on a wall or bench.

This is a simple soldering iron stand composed of a heavy-duty metal base and a reinforced spring holder. The base and holder are detachable. A circular cleaning sponge, which has a nice home at the bottom of the base, is included.

A small 50mm x 50mm soldering hot plate...

With the iFixit Soldering Splint by your side, you don't have to wish you had a third-hand. This board is perfect for when you are joining two wires...

A simple metal soldering iron stand with a brass tip cleaner...

Enhance your soldering precision with our Third Hand with Magnifying Glass - the ideal electronics workspace companion, providing stability and accuracy. Featuring a heavy base, adjustable clips, and a magnifying glass, this tool is perfect for detailed work on circuit boards and components. Optimised for use with our soldering equipment range.

If you do a lot of soldering indoors, a Carbon Filter is essential for absorbing that solder smoke and leaving your air smelling fresh. These measure about 13 x...

6 piece soldering aid tool kit containing various tips on each end (brush, scraper, file, screwdriver, etc). Great for soldering works.

Soldering is great, but the fumes not so much. This is a small benchtop fume extractor designing to compliment your soldering setup by incorporating a replaceable, activated carbon filter with a powerful fun to draw smoke into it.

This is a brass sponge that will help clean your soldering iron tip. Use it to remove residue from your iron tip before soldering. It cleans better than conventional sponges and will not damage your iron tip. Made of low abrasive brass shavings and requires no water. Works well as a replacement brass sponge for the Brass Sponge Base sold below.

This brass sponge is super glam and super useful. Preferred by many soldering pros for cleaning off the tips of their soldering irons, it never needs wetting, wont...