Solder:Time DIY watch kit

SKU: ADA495 Brand: Adafruit

Retired Product

Search for an alternative
This product has been retired. It is no longer available, but this page has been kept for reference.

Calculator watches are back, but microcontroller watches are always in style. Make your own with this easy to solder real time watch kit from SpikenzieLabs! It comes with a unique laser cut acrylic casing which protects the watch and looks snazzy besides: the four individual acrylic parts cut to fit the internal PCB, battery and switch perfectly. Included is a velcro wrist band. After soldering the Solder:Time, the watch is built by stacking the acrylic parts with the PCB and holding it together with the included screws.

The Solder:Time was designed to be a wrist watch. It doesn't have to be limited to living on your wrist, you could also use it as a badge or desk clock.

Features:

  • Great looking laser cut acrylic case
  • Unique watch
  • Easy to solder
  • Stand alone project - no computer or other programmer required. Just solder it and it's ready!
  • On board Dallas DS1337+ Real Time Clock (RTC) for super accurate time keeping
  • Jumper (on bottom) for always on use.
  • Hackable: Programming and I2C pads labeled on bottom
  • Clear front and back casing to show the internal electronics
  • Adjustable wrist band
  • Can be also be worn as a badge with optional badge clip.
  • Long lasting battery, with special LED lighting method and very low power processor sleeping.

This is a DIY soldering kit, you'll need to assemble it yourself but luckily that is very easy, and very fast so this is a good kit for beginners! You'll need basic soldering tools such as an iron, solder, and diagonal cutters.

Kit includes: Solder:Time PCB with all of the electronics, Laser cut acrylic casing with four screws, Easy to use Velcro type wrist band (long enough for huge wrists, trim-able for smaller ones and a CR2032 Battery. All instructions are here!

Technical Details

  • Great looking laser cut acrylic case
  • Unique watch
  • Easy to solder
  • Stand alone project - no computer or other programmer required. Just solder it and it's ready!
  • On board Dallas DS1337+ Real Time Clock (RTC) for super accurate time keeping
  • Jumper (on bottom) for always on use.
  • Hackable: Programming and I2C pads labeled on bottom
  • Clear front and back casing to show the internal electronics
  • Adjustable wrist band
  • Can be also be worn as a badge with optional badge clip.
  • Long lasting battery, with special LED lighting method and very low power processor sleeping.


Battery life: About 7 days of good brightness and then another 3 to 7 getting dim. The designer added the "always on" jumper more for use as a desk clock with a set of AA batteries (there are also pins for an external battery). While the display is off the watch only draws 0.001ma.

Dimensions:

  • Diameter: 60mm (2.4 in)
  • Thickness: 15mm (0.6in)
  • Weight: 43g (1.5oz)

This product is listed in:

Retired

Product Comments

Exact shipping can be calculated on the view cart page (no login required).

Products that weigh more than 0.5 KG may cost more than what's shown (for example, test equipment, machines, >500mL liquids, etc).

We deliver Australia-wide with these options (depends on the final destination - you can get a quote on the view cart page):

  • $3+ for Stamped Mail (typically 10+ business days, not tracked, only available on selected small items)
  • $6+ for Standard Post (typically 6+ business days, tracked)
  • $10+ for Express Post (typically 2+ business days, tracked)
  • Pickup - Free! Only available to customers who live in the Newcastle region (must order online and only pickup after we email to notify you the order is ready). Orders placed after 2PM may not be ready until the following business day.

Non-metro addresses in WA, NT, SA & TAS can take 2+ days in addition to the above information.

Some batteries (such as LiPo) can't be shipped by Air. During checkout, Express Post and International Methods will not be an option if you have that type of battery in your shopping cart.

International Orders - the following rates are for New Zealand and will vary for other countries:

  • $11+ for Pack and Track (3+ days, tracked)
  • $16+ for Express International (2-5 days, tracked)

If you order lots of gear, the postage amount will increase based on the weight of your order.

Our physical address (here's a PDF which includes other key business details):

Unit 18, 132 Garden Grove Parade
Adamstown
NSW, 2289
Australia

Take a look at our customer service page if you have other questions such as "do we do purchase orders" (yes!) or "are prices GST inclusive" (yes they are!). We're here to help - get in touch with us to talk shop.

Have a product question? We're here to help!

Write Your Own Review

Guides

The Maker Revolution

The Maker Revolution celebrates the creation of new devices and the modification of existing ones - ...
The Maker Revolution celebrates the creation of new devices and the modification of existing ones - ...

Projects

Raspberry Pi Video Looper Display Installation | Overshare Video Festival

IntroductionA suspended ceiling display of forty repurposed screens and displays, each screening cr...
IntroductionA suspended ceiling display of forty repurposed screens and displays, each screening cr...

Mailbox Delivery Notification System

Introduction During the Covid lockdown, I needed something to do. The Postman or woman does not de...
Introduction During the Covid lockdown, I needed something to do. The Postman or woman does not de...

PiicoDev Schematic System

Introduction: Hi everybody. Over the past few weeks, I have been working on an intuitive system th...
Introduction: Hi everybody. Over the past few weeks, I have been working on an intuitive system th...
Feedback

Please continue if you would like to leave feedback for any of these topics:

  • Website features/issues
  • Content errors/improvements
  • Missing products/categories
  • Product assignments to categories
  • Search results relevance

For all other inquiries (orders status, stock levels, etc), please contact our support team for quick assistance.

Note: click continue and a draft email will be opened to edit. If you don't have an email client on your device, then send a message via the chat icon on the bottom left of our website.

Makers love reviews as much as you do, please follow this link to review the products you have purchased.