Expand your Raspberry Pi Model B's capabilities with a variety of HATs and plates, from GPIO extensions and cooling solutions to power management and display adapters.

per page

Items 1-25 of 76

Set Ascending Direction
  1. Makerverse Protoboard for Raspberry Pi
    Rating:
    100% of 100
    SKU: CE08238 Brand: Makerverse
    Breaks out and labels every GPIO to a convenient prototyping board.
    - +

    106 from local stock, 1 supplier stock; your order will dispatch between Dec 1 to Dec 10. And yes, stock levels and lead times are accurate!

    Delivered by Nov 15th
  2. Pimoroni Blinkt!
    Rating:
    100% of 100
    SKU: PIM184 Brand: Pimoroni Guides (1)
    The Pimoroni Blinkt! is a “shield” for the Raspberry Pi, equipped with eight super-bright and addressable RGB LEDs that make it ideal for adding visual notifications...
    - +

    5 from local stock, 1 supplier stock; your order will dispatch between Dec 1 to Dec 10. And yes, stock levels and lead times are accurate!

    Delivered by Nov 15th
  3. Pimoroni Unicorn HAT HD
    Rating:
    100% of 100
    SKU: PIM273 Brand: Pimoroni
    Pimoroni have stepped up their LED game! Unicorn HAT HD crams 256 RGB LEDs, in a 16x16 matrix, onto a single HAT. High-definition rainbow goodness!
    Special Price $76.33 AUD, inc GST
    Regular Price $89.80 AUD, inc GST
    - +

    1 from local stock, 1 supplier stock; your order will dispatch between Dec 1 to Dec 10. And yes, stock levels and lead times are accurate!

    Delivered by Nov 15th
  4. Pimoroni Picade Pan-Tilt Hat (Full Kit)
    Rating:
    100% of 100
    SKU: CE04655 Brand: Pimoroni Guides (2)
    Pimironi's Pan-Tilt HAT lets you mount and control one of their pan-tilt modules right on top of your Raspberry Pi. The HAT and its on-board microcontroller let you independently drive the two servos (pan and tilt), as well as driving up to 24 regular LED (with PWM control) or NeoPixel RGB (or RGBW) LEDs.
    - +

    4 from local stock, 1 supplier stock; your order will dispatch between Dec 1 to Dec 10. And yes, stock levels and lead times are accurate!

    Delivered by Nov 15th
  5. Pimoroni Skywriter HAT
    SKU: CE00314 Brand: Pimoroni
    Control your Pi with a flick of the wrist. Skywriter HAT senses the position of your fingers in the air above.
    - +

    3 from local stock, 1 supplier stock; your order will dispatch between Dec 1 to Dec 10. And yes, stock levels and lead times are accurate!

    Delivered by Nov 15th
  6. 1 Wire Pi Plus
    SKU: CE07448 Brand: AB Electronics
    The 1 Wire Pi Plus is a communication board supporting the 1-Wire® protocol designed for use on the Raspberry Pi . A 5V buffered I2C port is also provided on the board.
    - +

    2 from local stock, 1 supplier stock; your order will dispatch between Dec 1 to Dec 10. And yes, stock levels and lead times are accurate!

    Delivered by Nov 15th
  7. Servo PWM Pi
    SKU: CE07483 Brand: AB Electronics
    The Servo PWM Pi is a 16-channel, 12-bit PWM controller for the Raspberry Pi, suitable for driving LEDs and radio control servos. The board is based around PCA9685 PWM I2C LED controller IC from NXT and can drive each of the 16 outputs with 12 bit (4096 steps) duty cycle from 0% to 100%.
    - +

    5 from local stock, 1 supplier stock; your order will dispatch between Dec 1 to Dec 10. And yes, stock levels and lead times are accurate!

    Delivered by Nov 15th
  8. ADC Pi
    Rating:
    100% of 100
    SKU: CE07486 Brand: AB Electronics
    The ADC Pi is an 8 channel 17 bit analogue to digital converter designed to work with the Raspberry Pi. The ADC Pi is based on two Microchip MCP3424 A/D converters each containing 4 analogue inputs. The MCP3424 is a delta-sigma A/D converter with low noise differential inputs.
    - +

    10 from local stock, 1 supplier stock; your order will dispatch between Dec 1 to Dec 10. And yes, stock levels and lead times are accurate!

    Delivered by Nov 15th
  9. ADC Differential Pi
    SKU: CE07487 Brand: AB Electronics
    The ADC Pi is an 8 channel 17 bit analogue to digital converter designed to work with the Raspberry Pi. The ADC Pi is based on two Microchip MCP3424 A/D converters each containing 4 analogue inputs. The MCP3424 is a delta-sigma A/D converter with low noise differential inputs.
    - +

    1 from local stock, 1 supplier stock; your order will dispatch between Dec 1 to Dec 10. And yes, stock levels and lead times are accurate!

    Delivered by Nov 15th
  10. ADC-DAC Pi Zero
    SKU: CE07488 Brand: AB Electronics
    The ADC-DAC Pi Zero is a 2 channel 12 bit analogue to digital converter and 2 channel 12 bit digital to analogue converter designed to work with the Raspberry Pi. Designed for the same footprint as the Raspberry Pi Zero the ADC-DAC Pi Zero is also compatible with full size Raspberry Pi models.
    - +

    5 from local stock, 1 supplier stock; your order will dispatch between Dec 1 to Dec 10. And yes, stock levels and lead times are accurate!

    Delivered by Nov 15th
  11. Breakout Pi Plus
    Rating:
    100% of 100
    SKU: CE07489 Brand: AB Electronics
    The Breakout Pi Plus is a useful and versatile prototyping expansion board for the Raspberry Pi.
    - +

    6 from local stock, 1 supplier stock; your order will dispatch between Dec 1 to Dec 10. And yes, stock levels and lead times are accurate!

    Delivered by Nov 15th
  12. Expander Pi
    SKU: CE07491 Brand: AB Electronics
    Expander Pi is a versatile digital and analogue expansion board. It allows you to connect your Raspberry Pi to switches, lights, sensors, and many other devices giving you a way to communicate with the outside world.
    - +

    5 from local stock, 1 supplier stock; your order will dispatch between Dec 1 to Dec 10. And yes, stock levels and lead times are accurate!

    Delivered by Nov 15th
  13. I2C Switch
    SKU: CE07492 Brand: AB Electronics
    The I2C Switch from AB Electronics UK is a 4 channel bidirectional I2C switch controlled via the I2C-bus. It is designed for use on all Raspberry Pi models with the 40 pin GPIO connector.
    - +

    2 from local stock, 1 supplier stock; your order will dispatch between Dec 1 to Dec 10. And yes, stock levels and lead times are accurate!

    Delivered by Nov 15th
  14. IO Pi Plus
    SKU: CE07493 Brand: AB Electronics
    The IO Pi Plus is a 32 channel digital expansion board designed for use on the Raspberry Pi. The board is based around the MCP23017 16-bit I/O expander from Microchip Technology Inc. A pair of MCP23017 expanders are included on the board allowing you to connect up to 32 digital inputs or outputs to the Raspberry Pi. The IO Pi Plus is powered through the host Raspberry Pi using the GPIO port and extended pins on the GPIO connector allow you to stack the IO Pi Plus along with other expansion boards.
    - +

    4 from local stock, 1 supplier stock; your order will dispatch between Dec 1 to Dec 10. And yes, stock levels and lead times are accurate!

    Delivered by Nov 15th
  15. RS485 Pi
    Rating:
    100% of 100
    SKU: CE07496 Brand: AB Electronics
    The RS485 Pi is a communication board supporting the RS-485 serial protocol.
    - +

    8 from local stock, 1 supplier stock; your order will dispatch between Dec 1 to Dec 10. And yes, stock levels and lead times are accurate!

    Delivered by Nov 15th
  16. RTC Pi
    Rating:
    100% of 100
    SKU: CE07497 Brand: AB Electronics
    The Raspberry Pi is a great low cost computer with thousands of different uses but one thing it does not come with is a real-time clock. This means that every time you switch off your Raspberry Pi it forgets what the time is and you have to manually set it again next time you switch your Raspberry Pi on.
    - +

    5 from local stock, 1 supplier stock; your order will dispatch between Dec 1 to Dec 10. And yes, stock levels and lead times are accurate!

    Delivered by Nov 15th
  17. Serial Pi Plus
    SKU: CE07498 Brand: AB Electronics
    The Serial Pi Plus is a communication board supporting the RS232 serial protocol.
    - +

    4 from local stock, 1 supplier stock; your order will dispatch between Dec 1 to Dec 10. And yes, stock levels and lead times are accurate!

    Delivered by Nov 15th
  18. Pimoroni Flat HAT Hacker
    Rating:
    100% of 100
    SKU: PIM536 Brand: Pimoroni
    Now at right angles! Securely attach a HAT (or two mini HATs) to your Raspberry Pi 400, so that they're pointing upwards and correctly oriented.
    - +

    1 from local stock, 1 supplier stock; your order will dispatch between Dec 1 to Dec 10. And yes, stock levels and lead times are accurate!

    Delivered by Nov 15th
  19. NFC HAT for Raspberry Pi (PN532)
    Rating:
    100% of 100
    SKU: CE07555 Brand: Waveshare Guides (1)
    This is a Raspberry Pi NFC HAT based on PN532 operating in the 13.56MHz frequency range. It supports three communication interfaces: I2C, SPI, and UART.
    - +

    14 from local stock, 1 supplier stock; your order will dispatch between Dec 1 to Dec 10. And yes, stock levels and lead times are accurate!

    Delivered by Nov 15th
  20. Pimoroni Skywriter: 3D Gesture Sensing Breakout
    SKU: CE06356 Brand: Pimoroni
    Using Pimoroni's Python and Arduino libraries you can read off the positional data (x, y, z) and common gestures like flick left, tap, and double tap!
    Special Price $28.16 AUD, inc GST
    Regular Price $51.20 AUD, inc GST
    - +

    3 from local stock, 1 supplier stock; your order will dispatch between Dec 1 to Dec 10. And yes, stock levels and lead times are accurate!

    Delivered by Nov 15th
  21. Pimoroni Picade X HAT USB-C
    Rating:
    100% of 100
    SKU: CE06511 Brand: Pimoroni
    Turn your Raspberry Pi into a retro games console! Picade X HAT includes joystick and button inputs, a 3W I2S DAC/amplifier, and soft power switch. Nice!
    - +

    0 from local stock, 1 supplier stock; your order will dispatch between Dec 1 to Dec 10. And yes, stock levels and lead times are accurate!

    Available with 7 to 12 day lead time
  22. Pimoroni Enviro for Raspberry Pi
    SKU: PIM486 Brand: Pimoroni
    Monitor your world with Enviro for Raspberry Pi! There's a whole bunch of fancy environmental sensors on these boards, and a gorgeous little full-colour LCD to display your data. The perfect way to get started with citizen science and environmental monitoring!
    - +

    1 from local stock, 1 supplier stock; your order will dispatch between Dec 1 to Dec 10. And yes, stock levels and lead times are accurate!

    Delivered by Nov 15th
  23. Pimoroni Enviro + Air Quality for Raspberry Pi
    Rating:
    90% of 100
    SKU: PIM458 Brand: Pimoroni
    Monitor your world with Enviro + Air Quality for Raspberry Pi! There's a whole bunch of fancy environmental sensors on these boards, and a gorgeous little full-colour LCD to display your data. The perfect way to get started with citizen science and environmental monitoring!
    - +

    2 from local stock, 1 supplier stock; your order will dispatch between Dec 1 to Dec 10. And yes, stock levels and lead times are accurate!

    Delivered by Nov 15th
  24. Pimoroni Inky pHat
    Rating:
    100% of 100
    SKU: CE05396 Brand: Pimoroni
    Inky pHAT's beautiful 212x104 pixel, three-colour display is ideal for displaying simple graphics and crisply-rendered text and, because it's like paper, it's readable in bright sunlight.
    - +

    2 from local stock, 1 supplier stock; your order will dispatch between Dec 1 to Dec 10. And yes, stock levels and lead times are accurate!

    Delivered by Nov 15th
  25. Pimoroni pHAT Stack
    SKU: CE05398 Brand: Pimoroni
    A preposterous pile of peripherals on your Pi! Mix and match 3 HATs or 5 pHATs into a platter of functionality. Use pHAT Stack for specific setups and projects, or just as a handy way to use several HATs or pHATs at once.
    - +

    0 from local stock, 1 supplier stock; your order will dispatch between Dec 1 to Dec 10. And yes, stock levels and lead times are accurate!

    Available with 7 to 12 day lead time
Page
per page

Take a look at our Raspberry Pi Tutorials along with our free Online Workshop. For makers, by makers.

Feedback

Please continue if you would like to leave feedback for any of these topics:

  • Website features/issues
  • Content errors/improvements
  • Missing products/categories
  • Product assignments to categories
  • Search results relevance

For all other inquiries (orders status, stock levels, etc), please contact our support team for quick assistance.

Note: click continue and a draft email will be opened to edit. If you don't have an email client on your device, then send a message via the chat icon on the bottom left of our website.

Makers love reviews as much as you do, please follow this link to review the products you have purchased.