Raspberry Pi Compute Module 3+ Dev Kit

SKU: ADA4092 Brand: Adafruit

Retired Product

Search for an alternative

This product has been retired. It is no longer available, but this page has been kept for reference.

The Compute Module 3+ Dev Kit is for those who wish to make use of the Raspberry Pi in a more flexible form factor, intended for industrial applications. The IO Board V3+ is made for developing with CM3+, CM3+/Lite, CM3, CM3L, and CM1.

The accompanying IO Board is a simple, open-source breakout board that you can plug a Compute Module into. The board hosts 120 GPIO pins, an HDMI port, a USB port, two camera ports, and two display ports. Designing the Module into a custom system should be relatively straightforward as the Raspberry Pi Foundation has put all the tricky bits onto the Module itself, and you have the freedom to add extra components and place parts exactly where your product needs them.

Includes:

1 × CMIO v3 breakout board
1 × CM3+/32GB Compute Module
1 × CM3+/Lite Compute Module
1 × CMCDA board (breaks in half to 1 × camera and 1 × display adapter)
2 × 22W, 0.5mm pitch, 50mm length small FFCs for the adapters
1 × USB B to USB A cable (for programming)
4 × pin header female-to-female jumper leads (20cm), to allow connecting display and camera I2C

Once you've got your design and peripherals chosen for use, you can take the I/O board design files, remove all the components you aren'tusing, and get the perfect Pi design for the Compute Module!

The Raspberry Pi Compute Module is not included, but Adafruit stock them here!

Note: Our 5V 2.4 A power supply works great and provides plenty of power to the chip, Ethernet, and any USB add-ons you plug in.

Technical Details

Product Dimensions: 105.0mm x 85.0mm x 12.0mm / 4.1" x 3.3" x 0.5"

Product Weight: 53.3g / 1.9oz

This product is listed in:

Retired

Product Comments

Start the conversation

Exact shipping can be calculated on the view cart page (no login required).

Products that weigh more than 0.5 KG may cost more than what's shown (for example, test equipment, machines, >500mL liquids, etc).

We deliver Australia-wide with these options (depends on the final destination - you can get a quote on the view cart page):

$3+ for Stamped Mail (typically 10+ business days, not tracked, only available on selected small items)
$6+ for Standard Post (typically 6+ business days, tracked)
$10+ for Express Post (typically 2+ business days, tracked)
Pickup - Free! Only available to customers who live in the Newcastle region (must order online and only pickup after we email to notify you the order is ready). Orders placed after 2PM may not be ready until the following business day.

Non-metro addresses in WA, NT, SA & TAS can take 2+ days in addition to the above information.

Some batteries (such as LiPo) can't be shipped by Air. During checkout, Express Post and International Methods will not be an option if you have that type of battery in your shopping cart.

International Orders - the following rates are for New Zealand and will vary for other countries:

$11+ for Pack and Track (3+ days, tracked)
$16+ for Express International (2-5 days, tracked)

If you order lots of gear, the postage amount will increase based on the weight of your order.

Our physical address (here's a PDF which includes other key business details):

Unit 18, 132 Garden Grove Parade
Adamstown
NSW, 2289
Australia

Take a look at our customer service page if you have other questions such as "do we do purchase orders" (yes!) or "are prices GST inclusive" (yes they are!). We're here to help - get in touch with us to talk shop.

Have a product question? We're here to help!

Write Your Own Review