This product has been retired and kept here for reference.
This item is a pyroelectric sensor module developed for human body detection.
Features:
- Size: 32mm(L) * 24.30mm(W) * 25mm(H)
- Automatic induction: People into its sensing range, the output is high; otherwise, output low.
- Photosensitive control: (Optional, not factory-set): it will trigger only in the darkness.
- Two triggering methods(Jumper sel ection):
- a. Non-repeatable triggering mode: after the sensor output high level with a period delay, automatically turns to output low level.
- b. Repeatable triggering mode: after it outputs high level, during the delay period, if there is presence of people, it keeps on outputting high level until people leave, then turns to low level.
- Output type: high/low level output
Specification:
|
Specification
|
Value
|
|
Operating Voltage Range
|
DC 5V
|
|
Quiescent Current
|
<60uA |
|
VoltageOutput High/LowLevelSignal
|
3.3V TTL output
|
|
Trigger
|
L: Non-repeatable trigger
|
|
H:Repeat Trigger (default)
|
|
|
Delay time
|
Delay time 5-200S(can be adjuted, default 5s +-3%)
|
|
Blocking time
|
Default 2.5S, can make a few tenths range - tens
|
|
Detection Range
|
<110 degree
|
|
Detection Distance
|
3 to 7meters(can be adjuted)
|
|
Operating Temperature |
-20 to +80 Degrees |
Note:
- About one minute initialization time is needed for the PIR Motion detector module. During this time, the signal triggered by the module is not stable. After one minute, module will be normal.
- Don’t exposed the module to direct sun light or lighting, big wind, near a heater or air condition.
- Don’t fix it at a place where there are obstructing material (eg. Glass, dense clothes) which IR cannot get though.
- Don’t fix it in strong shock or vibration envirement
Downloads:
This product is listed in:
Documentation and Resources:
We deliver Australia-wide with these options:
- $3 for Small Items (4-6 days, not tracked, only available on selected small items)
- $6.95 for Standard Post (2-4 days, tracked)
- $8.32 for Express Post (1-2 days, tracked)
- Pickup - Free! Only available to customers who live in the Newcastle region
International Orders - the following rates are for New Zealand and will vary for other countries:
- $11.49 for Pack and Track (3+ days, tracked)
- $16.50 for Express International (2-5 days, tracked)
If you order lots of gear, the postage amount might increment based on the weight of your order.
Our physical address:
Unit 18, 132 Garden Grove Parade
Adamstown
NSW, 2289
Australia
Please checkout our customer service page if you have other frequently asked questions such as "do we do purchase orders" (yes!) or "are prices GST inclusive" (yes they are!). We're here to help - get in touch with us to talk shop.
Customers Also Bought
-
Vertical Potentiometer 100 Pack (10 Types 100 to 1M Ohms)
$8.58 AUD, inc GSTThis pack includes many of the common types of Vertical Potentiometers....
-
3mm + 5mm LEDs Pack 100pcs (Red, Green, Yellow)
$6.33 AUD, inc GSTThe pack includes 100 LEDs, mixed with 3mm and 5mm LEDs. ...
-
Solderless Breadboard Jumper Cable Wires (75 Pieces)
$4.95 AUD, inc GSTThese jumper wires feature a male pin at each end which is perfect for connecting different points of the breadboard tog...
-
USB to TTL Serial UART RS232 Adaptor (PL2303)
$5.54 AUD, inc GSTUSB to TTL converters are an essential for prototyping - they provide a direct interface with the target device. This mo...
-
PIR (motion) sensor
$16.95 AUD, inc GSTPIR sensors are used to detect motion from pets/humanoids from about 20 feet away (possibly works on zombies, not guaran ...
Loading...
Product Comments