Pycom Pygate

Pygate is an 8-channel LoRaWAN gateway. Connect your WiPy 3.0, LoPy4 and GPy and hook up any other Pycom devices and voila – a decentralised IoT network.

• NOTE: Just add a WiPy, LoPy4 or GPy to provide the processing capabilities as well as the ability to connect to the Internet, radio control and baseband processing.
• NOTE:This is the Pygate stand-alone without the Power over Ethernet adapter board. To get Power Over Ethernet get this adapter click here.

Pygate is Pycom’s latest hardware tech portfolio addition.

This is a new super low-cost 8-channel LoRaWAN gateway that comes in the shape of a shield. It’s got the well-known form factor from our other shields and you can connect your much loved WiPy3, LoPy4 or a GPy to it. Hook in your Pycom development boards up and you have yourself a nifty little decentralized IoT network in one go. Pygate also fits inside the Universal IP67 Case so you don’t have to limit yourself to indoors.

Connect a WiPy3, LoPy4 or a GPy to this shield and then hook in all your other Pycom devices and you have yourself a nifty little decentralized IoT network in one go.

Features

• Dual SX1257 transceivers for a total of 8 channels support
• Frequencies: 915 MHz
• Baseband processor: SX1308
• Compatible with WiPy3.0, GPy and LoP4
• Ultra-low power standby mode
• Ethernet with PoE via the optional daughter board
• Powered via USB, LiPo Battery and Ethernet via the optional daughter board
• LiPo battery charging via the USB port
• USB to serial connection for the Pycom module with auto-programming features
• Dimensions: 65 (W) x 50 (L) x 8 (H) mm
• (Same small form factor as the Expansion Board v3.0/v3.1)
• Fits the universal IP67 Case for outdoor use
• Pycom Pygate Doc

Important Note: Pygate is not compatible with FiPy.