PiShow 2.8" Resistive Touch Display can bring more pleasure to your Raspberry Pi project with no difficulty. The display is specially designed for Model B+ and Raspberry Pi 2 Model B and its diagonal is small enough -2.8" to allow a handily carry but at the same time ensure not too tiny to taxes user’s eyes.
65K colors and 320x240 pixel resolution provides you a higher resolution compare to the black and white 128x64.. This display integrate touch driver xx2046, communicating with Raspberry Pi through High Speed 48MHz SPI connection. With the touch panel, you could play the Raspberry Pi without the need for a mouse.
It’s very easy to setup, without the need for a cable or extra power supply, it can be directly attached onto the Raspberry Pi. We have packaged a system kernel with the LCD driver for you, you can upload to many OS for Raspberry pi such as Raspbian Debian fedora.ubunbu
FEATURES
• Up 30 Frames per second,a better viewing experience with no doubts! Watch your movie on Raspberry Pi.
• Compatible with Raspberry Pi B+,A+ and Pi 2 Model B
• Supports all Operating system on Raspberry Pi
• 65K colors and 320x240 Pixel Resolution
• Powered directly off Raspberry Pi
• Display full GUI output / primary output
• High Speed 48MHz SPI connection
• Integrated 4-wire Resistive Touch Panel and XPT2046 Driver
• UART debug pin out for USB to TTL debug
COMPATIBLE PRODUCTS
Company | Size | Resolution | Refresh rate | System Installation | Drive Mode | Backlight | Gamma value | IDROM | Screen Rotation | Speeed of Bus |
PiShow | 2.8″ | 320*240 | >=30fps | Supporting various of OS, system kernel has been packed with the LCD driver | SPI | High light | Adjustable | Y | N | 36MHz |
Normal | 3.2″ | 320*240 | 3-5fps | Outdated documents, highly impossible to upgrade. | DB | Normal | N.A | N | N | 16MHz |
Another | 2.8″ | 320*240 | N/a | Packaging system with only Deb installation documents | DC+SPI | Could control | Adjustable | Y | Y | 32MHz |
4D system | 2.8″ | 320*240 | High | Original source | SPI-FPGA | High Light | N.A | N | N.A | 125MHz |
* PiShow 2.8" Resistive Touch Display is both CE and FCC certified.
PART LIST
• 1 x Raspberry Pi 2.8’’ Touchscreen Display
DOCUMENTS
RELATED PRODUCTS
PiShow 2.4 Inch Resistive Touch Display | 5 Inch HDMI Display with USB TouchScreen | 7 Inch HDMI 1280x800 IPS Display |
Exact shipping can be calculated on the view cart page (no login required).
Products that weigh more than 0.5 KG may cost more than what's shown (for example, test equipment, machines, >500mL liquids, etc).
We deliver Australia-wide with these options (depends on the final destination - you can get a quote on the view cart page):
Non-metro addresses in WA, NT, SA & TAS can take 2+ days in addition to the above information.
Some batteries (such as LiPo) can't be shipped by Air. During checkout, Express Post and International Methods will not be an option if you have that type of battery in your shopping cart.
International Orders - the following rates are for New Zealand and will vary for other countries:
If you order lots of gear, the postage amount will increase based on the weight of your order.
Our physical address (here's a PDF which includes other key business details):
Unit 18, 132 Garden Grove Parade
Adamstown
NSW, 2289
Australia
Take a look at our customer service page if you have other questions such as "do we do purchase orders" (yes!) or "are prices GST inclusive" (yes they are!). We're here to help - get in touch with us to talk shop.
Have a product question? We're here to help!
Makers love reviews as much as you do, please follow this link to review the products you have purchased.
Product Comments