Piezo Transducer - 12V Buzzer (5200Hz)

SKU: CE08547 Brand: The Pi Hut

Retired Product

Replaced by: ADA1536
This product has been replaced by: ADA1536
This product is no longer available. This page is only for reference.

If you want to add beeps, tones or alerts to your Raspberry Pi project, you require a Piezo Buzzer!

This buzzer requires no external oscillation, simply place a voltage of between 1.5V & 24V DC, across the terminals and it will make noise!

This one comes with two wires attached and two screw mounting points, so it can easily be integrated onto a breadboard or into a circuit! To use you'll need a voltage source such as a battery; simply connect the black wire to the negative of the voltage source and the red wire to the positive point that voltage source.

This buzzer has an internal oscillator, simply place a voltage across the terminals and it will make noise!

Features

  • 12V Piezo Transducer
  • PCB & Breadboard Mountable
  • Low Power Consumption
  • Sealed Base

Technical Specification

  • Rated Voltage 12V DC
  • Operating Voltage 1.5V - 24V DC
  • Max Rated Current 12mA
  • Sound Output 5200Hz at 30cm, at Rated Voltage 90dB
  • Resonant Frequency 5200 ±500Hz
  • Operating Temperature -20 to +70°C
  • Storage Temperature -30 to +80°C
  • Overall Diameter: 35mm
  • Mounting Holes: M2.5 30mm apart
  • Centre Diameter: 22mm
  • Height: 12mm
  • Wire Length: 26AWG 90mm
  • Housing: PC ABS Black
  • Weight: 14g
  • Model No: 41.P25L120A-LF

 

This product is listed in:

Retired

Product Comments

Exact shipping can be calculated on the view cart page (no login required).

Products that weigh more than 0.5 KG may cost more than what's shown (for example, test equipment, machines, >500mL liquids, etc).

We deliver Australia-wide with these options (depends on the final destination - you can get a quote on the view cart page):

  • $3+ for Stamped Mail (typically 10+ business days, not tracked, only available on selected small items)
  • $6+ for Standard Post (typically 6+ business days, tracked)
  • $10+ for Express Post (typically 2+ business days, tracked)
  • Pickup - Free! Only available to customers who live in the Newcastle region (must order online and only pickup after we email to notify you the order is ready). Orders placed after 2PM may not be ready until the following business day.

Non-metro addresses in WA, NT, SA & TAS can take 2+ days in addition to the above information.

Some batteries (such as LiPo) can't be shipped by Air. During checkout, Express Post and International Methods will not be an option if you have that type of battery in your shopping cart.

International Orders - the following rates are for New Zealand and will vary for other countries:

  • $11+ for Pack and Track (3+ days, tracked)
  • $16+ for Express International (2-5 days, tracked)

If you order lots of gear, the postage amount will increase based on the weight of your order.

Our physical address (here's a PDF which includes other key business details):

Unit 18, 132 Garden Grove Parade
Adamstown
NSW, 2289
Australia

Take a look at our customer service page if you have other questions such as "do we do purchase orders" (yes!) or "are prices GST inclusive" (yes they are!). We're here to help - get in touch with us to talk shop.

Have a product question? We're here to help!

Write Your Own Review

Guides

The Maker Revolution

The Maker Revolution celebrates the creation of new devices and the modification of existing ones - ...
The Maker Revolution celebrates the creation of new devices and the modification of existing ones - ...

Projects

Interactive Exercise Bike - Pedal Powered Visuals

This project turns a cheap exercise mini bike into a virtual bike. I made this project with my brot...
This project turns a cheap exercise mini bike into a virtual bike. I made this project with my brot...

Analogue Quad Oscillator Drone Synth

I have a peer-reviewed study on my desk and it confidently tells me that all the capacitors...
I have a peer-reviewed study on my desk and it confidently tells me that all the capacitors...

Raspberry Pi Microscope

The Raspberry Pi Microscope was put together to help with soldering PCBs that have small surface mo...
The Raspberry Pi Microscope was put together to help with soldering PCBs that have small surface mo...
Feedback

Please continue if you would like to leave feedback for any of these topics:

  • Website features/issues
  • Content errors/improvements
  • Missing products/categories
  • Product assignments to categories
  • Search results relevance

For all other inquiries (orders status, stock levels, etc), please contact our support team for quick assistance.

Note: click continue and a draft email will be opened to edit. If you don't have an email client on your device, then send a message via the chat icon on the bottom left of our website.

Makers love reviews as much as you do, please follow this link to review the products you have purchased.