Mongoose OS & Google IoT Core Pack w/ Adafruit Feather HUZZAH32

SKU: ADA3606 Brand: Adafruit

Retired Product

Search for an alternative

This product has been retired. It is no longer available, but this page has been kept for reference.

In collaboration with Google and Mongoose OS, Adafruit's releasing an IoT Core Pack based around Adafruit's Feather HUZZAH32! This kit includes a pre-soldered Adafruit Feather HUZZAH with ESP32 WiFi and some sensors and components to get you started on your IoT journey.

Feather is a development board from Adafruit that, like its namesake, is thin, light and lets you fly. We designed Feather to be a new standard for portable microcontroller cores.

This starter kit contains the Adafruit HUZZAH32 – ESP32 Feather Board - Adafruit's take on an 'all-in-one' ESP32 WiFi development board with built-in USB and battery charging. It's an ESP32 WiFi module with all the extras you need, ready to rock!

At the Feather HUZZAH's heart is an ESP32 WiFi microcontroller clocked at 240 MHz and at 3.3V logic. The ESP32 is a perfect upgrade from the ESP8266 that has been so popular. In comparison, the ESP32 has way more GPIO, plenty of analog inputs, two analog outputs, multiple extra peripherals (like a spare UART), two cores so you don't have to yield to the WiFi manager, much higher-speed processor, etc. etc! we think that as the ESP32 gets traction, we'll see more people move to this chip exclusively, as it is so full-featured.

Mongoose is providing all documentation and setup support for this pack. For more information on how to get started with Mongoose, follow the link below:

https://mongoose-os.com/gcp/

And for more information on how to set up your Feather HUZZAH32, check out Adafruit's learn guide.

This kit includes:

1x pre-soldered Adafruit HUZZAH32 – ESP32 Feather Board
1x Micro Servo
1x PIR (motion) Sensor
1x USB Cable - A/Micro B
1x Fast Vibration Switch
1x Magnetic Contact Switch (door sensor)
1x Half-sized Breadboard
1x Premium Male/Male Jumper Wires - 40 x 6"
1x Magnetic Contact Switch (door sensor)
1x DHT22 Temperature-humidity Sensor + Extras

Component bag containing:

3x 12mm Tactile Switches
1x Breadboard Trim Potentiometer 10K
1x Diffused 10mm Green LED
1x Diffused 10mm Red LED
5x 10K 5% 1/4W Resistor
5x 560 Ohm 5% 1/4W Resistor
1x Piezo Buzzer
1x Photo Cell Light Sensor
1x Diffused RGB (tri-color) LED
1x Breadboard-friendly SPDT Slide Switch

Technical Details

Check out the link below for Mongoose documentation and guides!

https://mongoose-os.com/gcp/

This product is listed in:

Retired

Product Comments

Start the conversation

Exact shipping can be calculated on the view cart page (no login required).

Products that weigh more than 0.5 KG may cost more than what's shown (for example, test equipment, machines, >500mL liquids, etc).

We deliver Australia-wide with these options (depends on the final destination - you can get a quote on the view cart page):

$3+ for Stamped Mail (typically 10+ business days, not tracked, only available on selected small items)
$7+ for Standard Post (typically 6+ business days, tracked)
$11+ for Express Post (typically 2+ business days, tracked)
Pickup - Free! Only available to customers who live in the Newcastle region (must order online and only pickup after we email to notify you the order is ready). Orders placed after 2PM may not be ready until the following business day.

Non-metro addresses in WA, NT, SA & TAS can take 2+ days in addition to the above information.

Some batteries (such as LiPo) can't be shipped by Air. During checkout, Express Post and International Methods will not be an option if you have that type of battery in your shopping cart.

International Orders - the following rates are for New Zealand and will vary for other countries:

$12+ for Pack and Track (3+ days, tracked)
$16+ for Express International (2-5 days, tracked)

If you order lots of gear, the postage amount will increase based on the weight of your order.

Our physical address (here's a PDF which includes other key business details):

Unit 18, 132 Garden Grove Parade
Adamstown
NSW, 2289
Australia

Take a look at our customer service page if you have other questions such as "do we do purchase orders" (yes!) or "are prices GST inclusive" (yes they are!). We're here to help - get in touch with us to talk shop.

Have a product question? We're here to help!

Write Your Own Review