M5Stack Faces Kit - Pocket Computer with Keyboard/Game/Calculator

SKU: CE07660 Brand: M5Stack

Retired Product

Replaced by: M5 Stack
We currently have limited local stock of this product and back-ordering is unavailable due to global supplier chipset shortages.
This product has been replaced by: M5 Stack
This product is no longer available. This page is only for reference.

FAces Kit is a series of functional panels integration containing three most commonly used panels integration containing three most commonly used panels 'GameBoy','Calculator' and 'QWERTY'. With MEGA328 processor built inside, it works under slave mode through I2C communication protocol. With these 3 different panels, it will be very easy to support keyboard interaction with your M5Core.

Power on/off

  • Power on: click the red power button on the left
  • Power off: Quickly double-click the red power button on the left

Product Features

  • ESP32-based
  • Built in 6-axis IMU
  • Speaker, 3 Buttons, LCD
  • TF card slot (16G Maximum size)
  • Battery Socket & Lipo Battery
  • Replaceable multifunction panel
  • Extendable Pins & Holes
  • M-Bus Socket & Pins
  • Development Platform UIFlow, MicroPython, Arduino

Includes

  • 1x GRAY
  • 1x FACES Charger table
  • 1x FACES sling
  • 1x panel sticker
  • 3x FACES Keyboard(GameBoy, Calculator, QWERTY)
  • 10x Femal-male dupont
  • 6x M3x10 screw
  • 1x hexagon screw key
  • 1x Type-C USB(100cm)

Applications

  • Gameboy
  • Calculator
  • Input peripherals
  • Internet of things terminal controller
  • DIY creation

Specifications

ESP32: 240MHz dual core, 600 DMIPS, 520KB SRAM, Wi-Fi, dual mode Bluetooth
Flash Memory: 16MB
Power Input: 5V @ 500mA
Port: TypeC x 1, GROVE(I2C+I/0+UART) x 1
IPS Screen: 2 inch, 320x240 Colorful TFT LCD, ILI9342C, max brightness 853nit
Speaker: 1W-0928
Button: Custom button x 1
Core bottom port: PIN (G1,G2,G3,G16, G17, G18, G19, G21, G22, G23, G25, G26, G35, G36)
MEMS: BMM150 + MPU6886
Battery: 600 mAh @ 3.7V
Antenna: 2.4G 3D Antenna
Operating Temperature: 32°F to 104°F ( 0°C to 40°C )
Net weight: 250g
Gross weight: 264g
Product Size: 58.2mm x 54.2mm x 18.7mm
Package Size: 120mm x 85mm x 65mm
Case Material: Plastic ( PC )

This product is listed in:

Retired

Product Comments

Exact shipping can be calculated on the view cart page (no login required).

Products that weigh more than 0.5 KG may cost more than what's shown (for example, test equipment, machines, >500mL liquids, etc).

We deliver Australia-wide with these options (depends on the final destination - you can get a quote on the view cart page):

  • $3+ for Stamped Mail (typically 10+ business days, not tracked, only available on selected small items)
  • $7+ for Standard Post (typically 6+ business days, tracked)
  • $11+ for Express Post (typically 2+ business days, tracked)
  • Pickup - Free! Only available to customers who live in the Newcastle region (must order online and only pickup after we email to notify you the order is ready). Orders placed after 2PM may not be ready until the following business day.

Non-metro addresses in WA, NT, SA & TAS can take 2+ days in addition to the above information.

Some batteries (such as LiPo) can't be shipped by Air. During checkout, Express Post and International Methods will not be an option if you have that type of battery in your shopping cart.

International Orders - the following rates are for New Zealand and will vary for other countries:

  • $12+ for Pack and Track (3+ days, tracked)
  • $16+ for Express International (2-5 days, tracked)

If you order lots of gear, the postage amount will increase based on the weight of your order.

Our physical address (here's a PDF which includes other key business details):

40 Aruma Place
Cardiff
NSW, 2285
Australia

Take a look at our customer service page if you have other questions such as "do we do purchase orders" (yes!) or "are prices GST inclusive" (yes they are!). We're here to help - get in touch with us to talk shop.

Have a product question? We're here to help!

Write Your Own Review

Guides

The Maker Revolution

The Maker Revolution celebrates the creation of new devices and the modification of existing ones - ...
The Maker Revolution celebrates the creation of new devices and the modification of existing ones - ...

Projects

The Snooze Logger - A Wearable Sleep Position Monitor

Everyone needs a good night’s sleep!One of the factors affecting sleep quality is sleep posit...
Everyone needs a good night’s sleep!One of the factors affecting sleep quality is sleep posit...

Spectral Animations with a DIY MSGEQ7 I2C Device

Frequency Reactive LEDs, i2c Protocol, Raspberry Pi, and Other Adventures.Here at Pix Incorpor...
Frequency Reactive LEDs, i2c Protocol, Raspberry Pi, and Other Adventures.Here at Pix Incorpor...

VisionSphere: Camera Motion Detection for Raspberry Pi

A simple camera motion detection system for Raspberry Pi. Definitely written with Aussie's in mind ...
A simple camera motion detection system for Raspberry Pi. Definitely written with Aussie's in mind ...
Feedback

Please continue if you would like to leave feedback for any of these topics:

  • Website features/issues
  • Content errors/improvements
  • Missing products/categories
  • Product assignments to categories
  • Search results relevance

For all other inquiries (orders status, stock levels, etc), please contact our support team for quick assistance.

Note: click continue and a draft email will be opened to edit. If you don't have an email client on your device, then send a message via the chat icon on the bottom left of our website.

Makers love reviews as much as you do, please follow this link to review the products you have purchased.