LinkIt Assist 2502, a co-design product by Seeed Studio and MediaTek, is development board for prototyping Wearables and Internet of Things (IoT) devices that can connect to other smart devices or directly to cloud applications and services.
The development board includes a MT2502A IoT SiP Core module from AcSiP - AI2502S05, a MT5931 802.11b/g/n WLAN SiP Module - CW01S, a MT3332 GNSS Host-Based Solution SiP Module - CW03S, and an exchangeable 240X240 16-bit color capacitive touch LCM board.
The board offers high performance and low power consumption to devices with sophisticated communication or location acquisition requirements. With LinkIt Assist 2502, it's easier and cheaper for device developers to produce desirable, functional wearable products prototype.
In addition to pin breakouts, the board also comes with Seeed Xadow interface for connecting to various peripherals.
LinkIt Assist 2502 is fully supported on the MediaTek Labs site: check out the LinkIt section to download the SDK. Register with MediaTek Labs to participate in the forums, publish your products in the catalog, or take advantage of the Partner connect program.
And don't forget to submit your LinkIt Assist 2502 prototypes to our recipe section.
Includes MT2502A, MT5931,and MT3332 modules
Integrated voice-band, audio-band and baseband analog front-end
Integrated full-featured power management unit
Support IEEE 802.11b/g/n and Bluetooth co-existence
Support GPS, GLONASS, and BeiDou
Include a 240X240 capacitive touch LCM board
Low power for battery supply
Power supply: 5V USB power and 3.7V Li-on battery. Battery is required to boot
IO Voltage: 2.0~3.6V (2.8V Digital Power Source); 1.6~2.0V (1.8V Digital Power Source)
3 onboard buttons
3.5mm audio jack
Onboard vibration motor
Onboard GSM chip antenna, Wi-Fi/BT chip antenna, GPS chip antenna
Onboard charging via standard Micro USB
One Micro-SIM card Interface
One standard Xadow interface
SPI/I2C/UART/GPIO breakout interface
Dimension: 53x53x16 mm (include LCM board)
LinkIt Assist 2502 Board x1
240*240 Touch LCM Board x1
Lithium-ion Battery 3.7V-240mAh x1
Please visit our wiki page for more info about this product. It will be appreciated if you can help us improve the documents, add more demo code or tutorials.
Documentation and Resources:
We deliver Australia-wide with these options:
- $3 for Small Items (4-6 days, not tracked, only available on selected small items)
- $6.95 for Standard Post (2-4 days, tracked)
- $8.32 for Express Post (1-2 days, tracked)
- Pickup - Free! Only available to customers who live in the Newcastle region
International Orders - the following rates are for New Zealand and will vary for other countries:
- $11.49 for Pack and Track (3+ days, tracked)
- $16.50 for Express International (2-5 days, tracked)
If you order lots of gear, the postage amount might increment based on the weight of your order.
Our physical address:
Unit 18, 132 Garden Grove Parade
Please checkout our customer service page if you have other frequently asked questions such as "do we do purchase orders" (yes!) or "are prices GST inclusive" (yes they are!). We're here to help - get in touch with us to talk shop.