Lead-Free Hot Air Gun Soldering Rework Station w/ Four Nozzles - ATTEN ST-862D

SKU: ADA5238 Brand: Adafruit

Retired Product

This product has been replaced by: rework station
This product is no longer available. This page is only for reference.

If you've ever made a mistake when surface-mount soldering, you'll know how much of a pain it can be to fix it without the right tools. It can add critical time to a project and can seriously stymie your soldering momentum if you run into a bad component or a faulty reflow. With the ATTEN ST-862D Hot Air Soldering Rework Station, you can easily rework your boards and get your project back on track. It's also possible to use solder paste (in a syringe for example) to apply paste and then blow hot air over it to melt the solder and get the components into place.

This powerful station has an internal pump and heater to blow a steady stream of temperature-controlled hot air to make it super easy to remove components, fix joints and jumpers, replace missing components, or just correct something you've done wrong.

The ST-862D matches up performance with hot air stations that cost three times as much! It's also a good alternative to the Quick 861 at a lower price. It's great for beginners to experts thanks to its super-fast heat-up time and easy-to-use button interface. You can save and restore 'profiles' so you have one for lead-free, lead, small chips, or large. Comes with a nice stand and four different nozzles for different sized parts, three of which are angled to make it easier to hold the wand while heating up a zone.

It has a closed-loop temperature control range between 100°C - 480°C (212°F - 896°F) and a digital display so you can easily tell what temperature the air's blowing at. It has a power consumption of 1000W and an intelligent cooling system, so the airflow remains on until it gets to below 100°C. Airflow is 20 - 130L/min, but for most work, you'll want to keep it at the lower end of than that.

Just make sure to let the rework station heat up all the way before using it and be careful to use tools (and not your hands!) when using as it spits out, well, really hot air. Comes with four nozzles, use the smallest size you can get away with - it helps avoid damaging other components if you are trying to isolate one part of the board while avoiding a connector, for example.

Technical Details

Hose Length: ~76.2 cm / ~30"
Mains power 120VAC
Outer Diameters of Four Nozzles:
- 7mm / 0.27"
- 9mm / 0.35"
- 13mm / 0.5"
- 21.5mm / 0.85"

Product Dimensions: 210.0mm x 174.0mm x 150.0mm / 8.3" x 6.9" x 5.9"

Product Weight: 3,340.0g / 117.8oz

User Manual

This product is listed in:

Retired

Product Comments

Exact shipping can be calculated on the view cart page (no login required).

Products that weigh more than 0.5 KG may cost more than what's shown (for example, test equipment, machines, >500mL liquids, etc).

We deliver Australia-wide with these options (depends on the final destination - you can get a quote on the view cart page):

$3+ for Stamped Mail (typically 10+ business days, not tracked, only available on selected small items)
$7+ for Standard Post (typically 6+ business days, tracked)
$11+ for Express Post (typically 2+ business days, tracked)
Pickup - Free! Only available to customers who live in the Newcastle region (must order online and only pickup after we email to notify you the order is ready). Orders placed after 2PM may not be ready until the following business day.

Non-metro addresses in WA, NT, SA & TAS can take 2+ days in addition to the above information.

Some batteries (such as LiPo) can't be shipped by Air. During checkout, Express Post and International Methods will not be an option if you have that type of battery in your shopping cart.

International Orders - the following rates are for New Zealand and will vary for other countries:

$12+ for Pack and Track (3+ days, tracked)
$16+ for Express International (2-5 days, tracked)

If you order lots of gear, the postage amount will increase based on the weight of your order.

Our physical address (here's a PDF which includes other key business details):

Unit 18, 132 Garden Grove Parade
Adamstown
NSW, 2289
Australia

Take a look at our customer service page if you have other questions such as "do we do purchase orders" (yes!) or "are prices GST inclusive" (yes they are!). We're here to help - get in touch with us to talk shop.

Have a product question? We're here to help!

Write Your Own Review