JeVois Smart Machine Vision Camera

SKU: SEN-15137 Brand: Sparkfun

Retired Product

Replaced by: SEN-19728

This product has been replaced by: SEN-19728
This product is no longer available. This page is only for reference.

The JeVois Camera is a low cost, all-in-one 1.3MP machine vision camera. With an on board quad core CPU and MicroSD slot, all computer vision algorithms run on the device itself and can interface to computers or other devices such as Arduinos via USB or serial connection. At just 1.7 cubic inches and 17g, this sensor is one of the smallest TensorFlow enabled, deep learning AI, smart camera on the market today. With the added ability to run most popular machine vision frameworks (Open CV 4.0.0, Caffe, Darknet), you will have plenty of options when it comes to deciding how you want to operate your new camera!

The plastic case has four mounting holes making positioning the device simple along with an integrated cooling fan insuring no overheating or thermal throttling. For those looking to get into machine vision, this camera stands to be a solid, inexpensive starting point.

Includes

1.3MP Jevois Camera
Dual USB-A to USB-MiniB Cable.
MicroSd to USB Adapter
16GB MicroSD Card with MicroSD to SD Adapter (Comes with the latest firmware pre-installed)
JST to Bare Wire Interface Cable for serial connection
Comes in a reusable metal case

Features

Processor: Allwinner A33 quad core ARM Cortex A7 processor @ 1.34GHz with VFPv4 and NEON, and a dual core Mali-400 GPU supporting OpenGL-ES 2.0.
Memory: 256MB DDR3 SDRAM.
Solid state disk: micro SD slot for firmware, Linux operating system, machine vision software, and data. Supports up to 25Mbyte/s.
Camera sensor: 1.3MP camera with:
- SXGA (1280 x 1024) up to 15 fps (frames/second)
- VGA (640 x 480) up to 30 fps
- CIF (352 x 288) up to 60 fps
- QVGA (320 x 240) up to 60 fps
- QCIF (176 x 144) up to 120 fps
- QQVGA (160 x 120) up to 60 fps
- QQCIF (88 x 72) up to 120 fps
Camera field of view: 65 degrees horizontal, F2.8, 4:3 sensor aspect ratio.
USB device interface: mini USB port for power, video streaming (UVC webcam standard), and serial-over-USB command-line interface and text data streaming.
Hardware serial port: 5V or 3.3V (selected through VCC-IO pin) micro serial port connector to communicate with Arduino or other embedded controllers.
Power: 3.5 Watts maximum from USB port. Requires USB 3.0 port or Y-cable to two USB 2.0 ports.
Thermal: Integrated cooling fan, maintain stable 1.34GHz speed under full processor load, no overheating or thermal throttling.
LED: One two-color LED: Green: power is good. Orange: power is good and camera is streaming video frames.
Size: 28 cc or 1.7 cubic inches (plastic case included with 4 holes for secure mounting).
Weight: 17 grams (not including microSD card, which is about 1 gram).

Documents

This product is listed in:

Retired

Product Comments

Start the conversation

Exact shipping can be calculated on the view cart page (no login required).

Products that weigh more than 0.5 KG may cost more than what's shown (for example, test equipment, machines, >500mL liquids, etc).

We deliver Australia-wide with these options (depends on the final destination - you can get a quote on the view cart page):

$3+ for Stamped Mail (typically 10+ business days, not tracked, only available on selected small items)
$7+ for Standard Post (typically 6+ business days, tracked)
$11+ for Express Post (typically 2+ business days, tracked)
Pickup - Free! Only available to customers who live in the Newcastle region (must order online and only pickup after we email to notify you the order is ready). Orders placed after 2PM may not be ready until the following business day.

Non-metro addresses in WA, NT, SA & TAS can take 2+ days in addition to the above information.

Some batteries (such as LiPo) can't be shipped by Air. During checkout, Express Post and International Methods will not be an option if you have that type of battery in your shopping cart.

International Orders - the following rates are for New Zealand and will vary for other countries:

$12+ for Pack and Track (3+ days, tracked)
$16+ for Express International (2-5 days, tracked)

If you order lots of gear, the postage amount will increase based on the weight of your order.

Our physical address (here's a PDF which includes other key business details):

Unit 18, 132 Garden Grove Parade
Adamstown
NSW, 2289
Australia

Take a look at our customer service page if you have other questions such as "do we do purchase orders" (yes!) or "are prices GST inclusive" (yes they are!). We're here to help - get in touch with us to talk shop.

Have a product question? We're here to help!

Write Your Own Review