FTC Starter Kit (2022-2023 Season)

SKU: GB-3200-4008-2223 Brand: goBilda

Retired Product

Replaced by: GB-3200-4008-2324
This product has been replaced by: GB-3200-4008-2324
This product is no longer available. This page is only for reference.

Why buy this FTC Starter Kit?

  • Ball Bearing Based
    Because goBILDA is ball bearing based, your robot will have less friction and more efficiency.  

  • Better Gear Motors
    Our Yellow Jacket Planetary Gear Motors produce tremendous torque. 

  • Build it Your Way
    Mix and match pattern based Channel with slide-and-lock goRAIL to get the best of both worlds.

This Kit Includes:

Motors:

ftc-22-23-8mm-motors-1624px.jpg

Qty: 4 5203 Series Yellow Jacket Planetary Gear Motor (19.2:1 Ratio, 312 RPM, 3.3 - 5V Encoder) SKU: 5203-2402-0019 x 4

Motor Wiring:

 2023-motor-wiring-1624px.jpg

Qty: 4 2-Pos JST VH [MH-FC] to 3.5mm Bullet [MH-FC] Adaptor (100mm Length) SKU: 3801-0613-0100 x 4
Qty: 4 Encoder Cable, 600mm Length (4-Pos JST PH [MH-FC] to 4-Pos JST XH [MH-FC]) SKU: 3801-0709-0600 x 4

Servos:

 2023-servos-1624px.jpg

Qty: 2 2000 Series Dual Mode Servo (25-2, Torque) SKU: GB-2000-0025-0002 x 2
Qty: 2 2000 Series Dual Mode Servo (25-3, Speed) SKU: GB-2000-0025-0003 x 2
Qty: 1 Servo Programmer for 2000 Series Dual Mode Servo SKU: GB-3102-0001-0001 x 1

Servo Mounts:

2023-servo-mounts-22-23-kit-1624px.jpg

Qty: 2 ServoBlock™ (Standard Size, 25 Tooth Spline, Hub Shaft) SKU: 3202-0001-2501 x 2
Qty: 2 1802 Series Servo Frame (43mm Width, for Standard Size Servos) SKU: GB-1802-0043-0001 x 2

Servo Wiring:

2023-servo-wiring-1624px.jpg

Qty: 2 3-Pos TJC8 Servo Extension (MH-FC to FH-MC, 300mm Length) SKU: GB-3802-1718-0300 x 2
Qty: 2 3-Pos TJC8 Servo Extension (MH-FC to FH-MC, 600mm Length) SKU: GB-3802-1718-0600 x 2

Servo Attachments:

2023-8mm-kit-servo-attachments-2-1624px.jpg

Qty: 2 1908 Series Servo Hub (25 Tooth Spline, 32mm Diameter) SKU: GB-1908-0025-0032 x 2
Qty: 1 4001 Series Clamping Servo to Shaft Coupler (25 Tooth Spline to 8mm REX Bore) SKU: 4001-0025-4008 x 1

Battery and Accessories:

2023-battery-and-accessories-1624px.jpg

Qty: 1 Matrix 12V 3000mAh NiMH Battery SKU: GB-14-0014 x 1
Qty: 1 Battery Charger (NiCad/NiMH, 12-1) SKU: 3101-0012-0001 x 1
Qty: 1 XT30 [MH-FC] to Tamiya [MH-FC] Adaptor (60mm Length) SKU: GB-3801-0203-0060 x 1
Qty: 1 Battery Mount (32-1) SKU: GB-1209-0032-0001 x 1
Qty: 1 Zip Tie (100mm Length, Black) - 100 Pack SKU: GB-2909-0101-0100 x 1

Channel:

2023-channel-2023-2-11-hole-and-2-10-hole-1624px.jpg

Qty: 2 1120 Series U-Channel (1 Hole, 48mm Length) SKU: GB-1120-0001-0048 x 2
Qty: 2 1120 Series U-Channel (10 Hole, 264mm Length) SKU: GB-1120-0010-0264 x 2
Qty: 2 1120 Series U-Channel (11 Hole, 288mm Length) SKU: GB-1120-0011-0288 x 2
Qty: 2 1120 Series U-Channel (17 Hole, 432mm Length) SKU: GB-1120-0017-0432 x 2
Qty: 2 1121 Series Low-Side U-Channel (1 Hole, 48mm Length) SKU: GB-1121-0001-0048 x 2
Qty: 2 1121 Series Low-Side U-Channel (3 Hole, 96mm Length) SKU: GB-1121-0003-0096 x 2
Qty: 2 1121 Series Low-Side U-Channel (5 Hole, 144mm Length) SKU: GB-1121-0005-0144 x 2
Qty: 2 1121 Series Low-Side U-Channel (10 Hole, 264mm Length) SKU: GB-1121-0010-0264 x 2
Qty: 2 1121 Series Low-Side U-Channel (17 Hole, 432mm Length) SKU: GB-1121-0017-0432 x 2

Extrusion:

2023-8mm-extrusion-1624px.jpg

Qty: 3 1109 Series goRAIL (72mm Length) SKU: GB-1109-0024-0072 x 3

U-Beams:

2023-8mm-u-beams-1624px.jpg

Qty: 2 1101 Series U-Beam (1 Hole, 8mm Length) SKU: GB-1101-0001-0008 x 2
Qty: 2 1101 Series U-Beam (7 Hole, 56mm Length) SKU: GB-1101-0007-0056 x 2
Qty: 2 1101 Series U-Beam (29 Hole, 232mm Length) SKU: 1101-0029-0232 x 2

L-Beams:

2023-8mm-l-beams-1624px.jpg

Qty: 2 1103 Series L-Beam (5 Hole, 40mm Length) SKU: GB-1103-0005-0040 x 1
Qty: 2 1103 Series L-Beam (7 Hole, 56mm Length) SKU: GB-1103-0007-0056 x 1
Qty: 2 1103 Series L-Beam (9 Hole, 72mm Length) SKU: GB-1103-0009-0072 x 1
Qty: 2 1103 Series L-Beam (13 Hole, 104mm Length) SKU: GB-1103-0013-0104 x 1
Qty: 2 1103 Series L-Beam (29 Hole, 232mm Length) SKU: GB-1103-0029-0232 x 1

Flat Beams:

2023-8mm-flat-beams-1624px.jpg

Qty: 2 1102 Series Flat Beam (7 Hole, 56mm Length) SKU: GB-1102-0007-0056 x 1
Qty: 2 1102 Series Flat Beam (9 Hole, 72mm Length) SKU: GB-1102-0009-0072 x 1
Qty: 2 1102 Series Flat Beam (29 Hole, 232mm Length) SKU: GB-1102-0029-0232 x 1

Brackets and Mounts:

2023-ftc-kit-brackets-1624px.jpg

Qty: 8 1205 Series Dual Block Mount (1-5) - 2 Pack SKU: GB-1205-0001-0005 x 4
Qty: 4 1137 Series Steel Flat Grid Bracket (1-2) SKU: GB-1137-0001-0002 x 2
Qty: 8 1201 Series Quad Block Pattern Mount (43-2) SKU: GB-1201-0043-0002 x 8
Qty: 8 1203 Series Block Mount (1-1) SKU: GB-1203-0001-0001 x 2
Qty: 4 1114 Series Flat Bracket (90-1) SKU: GB-1114-0090-0001 x 4
Qty: 4 1139 Series Steel Grid Plates (3 x 7 Hole, 24 x 56mm) SKU: 1139-0024-0056 x 2

Standoffs and Spacers:

Standoffs and Spacers

Qty: 4 1501 Series M4 x 0.7mm Standoff (6mm OD, 12mm Length) SKU: GB-1501-0006-0120 x 1
Qty: 4 1501 Series M4 x 0.7mm Standoff (6mm OD, 24mm Length) SKU: GB-1501-0006-0240 x 1
Qty: 8 1501 Series M4 x 0.7mm Standoff (6mm OD, 43mm Length) SKU: GB-1501-0006-0430 x 2
Qty: 4 1501 Series M4 x 0.7mm Standoff (6mm OD, 48mm Length) SKU: GB-1501-0006-0480 x 1
Qty: 4 1502 Series 4mm ID Spacer (6mm OD, 4mm Length) SKU: GB-1502-0006-0040 x 1
Qty: 4 1502 Series 4mm ID Spacer (6mm OD, 8mm Length) SKU: GB-1502-0006-0080 x 1
Qty: 4 1502 Series 4mm ID Spacer (6mm OD, 12mm Length) SKU: GB-1502-0006-0120 x 1
Qty: 4 1504 Series 32mm OD Pattern Spacer (4mm Length) SKU: GB-1504-0032-0040 x 4
Qty: 1 1505 Series 32mm OD Counterbored Pattern Spacer (6mm Length) SKU: GB-1505-0032-0060 x 1
Qty: 5 1505 Series 32mm OD Counterbored Pattern Spacer (8mm Length) SKU: GB-1505-0032-0080 x 5

Gears:

2023-8mm-kit-gears-21-kit-1624px.jpg

Qty: 2 2302 Series Aluminum, MOD 0.8, Hub Mount Gear (14mm Bore, 100 Tooth) SKU: 2302-0014-0100 x 2
Qty: 2
2303 Series Steel, MOD 0.8 Pinion Gear (8mm REX Bore, 20 Tooth) SKU: 2303-4008-0020 x 2
Qty: 4 2303 Series Steel, MOD 0.8 Pinion Gear (8mm REX Bore, 30 Tooth) SKU: GB-2303-4008-0030 x 4

Sprockets and Chain:

2023-8mm-kit-sprockets-and-chain-2023-1624px.jpg

Qty: 250 3309 Series 8mm Pitch Plastic Chain Link SKU: GB-3309-0108-0050 x 5
Qty: 4 3307 Series 8mm Pitch Steel Set-Screw Sprocket (8mm REX Bore, 10 Tooth) SKU: 3307-4008-0010 x 4
Qty: 4 3310 Series 8mm Pitch Aluminum Hub Mount Sprocket (14mm Bore, 14 Tooth) SKU: 3310-0014-0014 x 4
Qty: 4 Acetal Timing Belt Idler (6mm ID x 12mm OD, 12mm Width, 1-1) SKU: 3413-0001-0001 x 2

Wheels:

2023-8mm-23-kit-wheels-1624px.jpg

Qty: 4 3601 Series Rhino Wheel (14mm Bore, 96mm Diameter) SKU: GB-3601-0014-0096 x 4
Qty: 4 3604 Series Omni Wheel (14mm Bore, 96mm Diameter) SKU: GB-3604-0014-0096 x 4
Qty: 2 3613 Series Gecko™ Wheel (14mm Bore, 72mm Diameter) SKU: GB-3613-0014-0072 x 2

Bearings:

Bearings

Qty: 24 1611 Series Flanged Ball Bearing (8mm ID x 14mm OD, 5mm Thickness) SKU: GB-1611-0514-0008 x 12
Qty: 4 1616 Series Drop-Center Bearing Plate (2mm Drop) - 4 Pack SKU: 1616-0016-0002 x 1

Shafting:

2023-22-23-8mm-shafting-ftc-kit-1624px.jpg

Qty: 1 2106 Series Stainless Steel REX Shaft (8mm Diameter, 56mm Length) SKU: GB-2106-4008-0560 x 1
Qty: 10 2106 Series Stainless Steel REX Shaft (8mm Diameter, 80mm Length) SKU: GB-2106-4008-0800 x 10
Qty: 2 2106 Series Stainless Steel REX Shaft (8mm Diameter, 120mm Length) SKU: GB-2106-4008-1200 x 2

Hubs, Couplers and Collars:

2023-8mm-kit-hubs-couplers-and-collars-1624px.jpg

Qty: 10 1309 Series Sonic Hub (8mm REX Bore) SKU: GB-1309-0016-4008 x 10
Qty: 4 1310 Series Hyper Hub (8mm REX Bore) SKU: GB-1310-0016-4008 x 4
Qty: 1 4007 Series Hyper Coupler (8mm REX Bore to 8mm REX Bore) SKU: 4007-4008-4008 x 1
Qty: 4 2920 Series Steel Set-Screw Collar (8mm REX Bore) - 2 Pack SKU: GB-2920-0001-4008 x 2

Screws:

2023-screw-piles-1624.jpg

Qty: 50 2800 Series Zinc-Plated Steel Socket Head Screw (M4 x 0.7mm, 6mm Length) SKU: GB-2800-0004-0006 x 2
Qty: 200 2800 Series Zinc-Plated Steel Socket Head Screw (M4 x 0.7mm, 8mm Length) SKU: GB-2800-0004-0008 x 8
Qty: 100 2800 Series Zinc-Plated Steel Socket Head Screw (M4 x 0.7mm, 10mm Length) SKU: GB-2800-0004-0010 x 4
Qty: 100 2800 Series Zinc-Plated Steel Socket Head Screw (M4 x 0.7mm, 12mm Length) SKU: GB-2800-0004-0012 x 4
Qty: 25 2800 Series Zinc-Plated Steel Socket Head Screw (M4 x 0.7mm, 14mm Length) SKU: GB-2800-0004-0014 x 1
Qty: 50 2800 Series Zinc-Plated Steel Socket Head Screw (M4 x 0.7mm, 18mm Length) SKU: 2800-0004-0018 x 2
Qty: 25 2800 Series Zinc-Plated Steel Socket Head Screw (M4 x 0.7mm, 20mm Length) SKU: GB-2800-0004-0020 x 1
Qty: 25 2800 Series Zinc-Plated Steel Socket Head Screw (M4 x 0.7mm, 30mm Length) SKU: GB-2800-0004-0030 x 1

Nuts, Washers and Shims:

2023-nuts-23-23-1624px.jpg

Qty: 200 2812 Series Zinc-Plated Steel Nylon-Insert Locknut (M4 x 0.7mm, 7mm Hex) SKU: GB-2812-0004-0007 x 8
Qty: 25 goRAIL Hurricane Nut SKU: GB-2805-0004-0108 x 1
Qty: 100 2801 Series Zinc-Plated Steel Washer (4mm ID x 8mm OD) SKU: GB-2801-0004-0008 x 4
Qty: 36 2807 Series Stainless Steel Shim (8mm ID x 11mm OD, 0.50mm Thickness) - 12 Pack SKU: GB-2807-0811-0500 x 3

Linkages and Hinges:

2023-linkages-and-hinges-1624px.jpg

Qty: 2 2808 Series Stainless Steel Threaded Rod (M4 x 0.7mm, 300mm Length) SKU: GB-2808-0004-0300 x 1
Qty: 4 2903 Series Nylon Ball Linkage (M4, 24.5mm Length) SKU: GB-2903-0004-0245 x 1
Qty: 1 2902 Plastic Hinge Block (25 Pack) SKU: GB-2902-0025-0001 x 1

Tools:

2023-8mm-tools-22-23-kit-1624px-10-12.jpg

Qty: 1 Wera Tools 2.5mm Ball-End Hex-Plus L-Key SKU: GB-5027103001 x 1
Qty: 1 Wera Tools 3mm Ball-End Hex-Plus L-Key SKU: GB-5027104001 x 1
Qty: 1 7mm Combination Nut Driver SKU: 4206-0070-0001 x 1

Downloads

This product is listed in:

Retired

Product Comments

Exact shipping can be calculated on the view cart page (no login required).

Products that weigh more than 0.5 KG may cost more than what's shown (for example, test equipment, machines, >500mL liquids, etc).

We deliver Australia-wide with these options (depends on the final destination - you can get a quote on the view cart page):

  • $3+ for Stamped Mail (typically 10+ business days, not tracked, only available on selected small items)
  • $7+ for Standard Post (typically 6+ business days, tracked)
  • $11+ for Express Post (typically 2+ business days, tracked)
  • Pickup - Free! Only available to customers who live in the Newcastle region (must order online and only pickup after we email to notify you the order is ready). Orders placed after 2PM may not be ready until the following business day.

Non-metro addresses in WA, NT, SA & TAS can take 2+ days in addition to the above information.

Some batteries (such as LiPo) can't be shipped by Air. During checkout, Express Post and International Methods will not be an option if you have that type of battery in your shopping cart.

International Orders - the following rates are for New Zealand and will vary for other countries:

  • $12+ for Pack and Track (3+ days, tracked)
  • $16+ for Express International (2-5 days, tracked)

If you order lots of gear, the postage amount will increase based on the weight of your order.

Our physical address (here's a PDF which includes other key business details):

Unit 18, 132 Garden Grove Parade
Adamstown
NSW, 2289
Australia

Take a look at our customer service page if you have other questions such as "do we do purchase orders" (yes!) or "are prices GST inclusive" (yes they are!). We're here to help - get in touch with us to talk shop.

Have a product question? We're here to help!

Write Your Own Review

Guides

The Maker Revolution

The Maker Revolution celebrates the creation of new devices and the modification of existing ones - ...
The Maker Revolution celebrates the creation of new devices and the modification of existing ones - ...

Projects

Spectral Animations with a DIY MSGEQ7 I2C Device

Frequency Reactive LEDs, i2c Protocol, Raspberry Pi, and Other Adventures.Here at Pix Incorpor...
Frequency Reactive LEDs, i2c Protocol, Raspberry Pi, and Other Adventures.Here at Pix Incorpor...

VisionSphere: Camera Motion Detection for Raspberry Pi

A simple camera motion detection system for Raspberry Pi. Definitely written with Aussie's in mind ...
A simple camera motion detection system for Raspberry Pi. Definitely written with Aussie's in mind ...

Arduino E-Paper Clock

This project started with a desire to have a modern digital clock that would use the natural light ...
This project started with a desire to have a modern digital clock that would use the natural light ...
Feedback

Please continue if you would like to leave feedback for any of these topics:

  • Website features/issues
  • Content errors/improvements
  • Missing products/categories
  • Product assignments to categories
  • Search results relevance

For all other inquiries (orders status, stock levels, etc), please contact our support team for quick assistance.

Note: click continue and a draft email will be opened to edit. If you don't have an email client on your device, then send a message via the chat icon on the bottom left of our website.

Makers love reviews as much as you do, please follow this link to review the products you have purchased.