The KitTen is an Arduino compatible board supplied as a kit using through-hole parts for easy assembly.
It may be easy to build, but it's still full-featured and high-performance. If you compare it to typical Arduino-compatible kits you'll see that it doesn't scrimp on anything: in fact our design has more smoothing capacitors alone than the entire parts count of most other kits! It even includes a 3.3V regulator to allow it to use shields that require 3.3V, which is not something you see in typical kits.
The KitTen has the following features:
Prototyping area
For those projects where you don't need the extra size or expense of a shield, the KitTen has its own standard prototyping area taking up a quarter of the board. Great for quick sensor and IC projects. There's extra power pads underneath for neat connections.
LEDs visible on the edge
Wondered what your Arduino was doing? We've placed a blue Power LED and red D13 LED on the right edge of the board so you can see what's going on even with a shield fitted on top.
Connector for FTDI USB cable
Use a commonly-available FTDI USB cable (not included) to upload sketches to your KitTen directly from the Arduino IDE.
Overlay guide where you need it
When you're soldering your project, it's good to know what you're connecting to! All of our boards and shields have a thorough pinout and guide printed on the bottom as well as the top, so when you're soldering underneath there's no need to flip the board over constantly.
Top spec MCU
Every KitTen includes the higher specification ATmega328P Microcontroller, and we've pre-loaded it with the Arduino bootloader. Just plug it in, launch the Arduino IDE, and you'll be running your own programs in no time.
D13 pin works for everything
The digital I/O pin 13 functionality has been fixed: the D13 indicator LED is isolated from the D13 pin using a MOSFET so that it no longer loads up this pin when you use it as an input.
Mounting holes and power pads
We've included a fourth mounting hole in the bottom left in the same location as the fourth hole on the Arduino Uno so there are no more wobbly board troubles if you're fitting it to a case. Helpful markings for the power jack size, polarity and voltage are right there on the board when you need them.
5V and 3.3V voltage regulators
Many Arduino-compatible kits don't provide both 5V and 3.3V voltage regulators, preventing you from using shields that require a 3.3V supply. We've included both 5V and 3.3V regulators to ensure the KitTen is compatible with all Arduino shields.
It's all in the same place
The power jack, headers and ICSP are all in exactly the same location as Arduino standard boards. The KitTen is perfectly compatible with all Arduino Duemilanove shields, projects and sketches.
What's in the box?
You will also need a 5V FTDI USB-to-Serial cable or a USB Serial Adapter to upload sketches to your KitTen once it has been assembled. You only need one cable or adapter no matter how many KitTens you build.
Downloads
Exact shipping can be calculated on the view cart page (no login required).
Products that weigh more than 0.5 KG may cost more than what's shown (for example, test equipment, machines, >500mL liquids, etc).
We deliver Australia-wide with these options (depends on the final destination - you can get a quote on the view cart page):
Non-metro addresses in WA, NT, SA & TAS can take 2+ days in addition to the above information.
Some batteries (such as LiPo) can't be shipped by Air. During checkout, Express Post and International Methods will not be an option if you have that type of battery in your shopping cart.
International Orders - the following rates are for New Zealand and will vary for other countries:
If you order lots of gear, the postage amount will increase based on the weight of your order.
Our physical address (here's a PDF which includes other key business details):
Unit 18, 132 Garden Grove Parade
Adamstown
NSW, 2289
Australia
Take a look at our customer service page if you have other questions such as "do we do purchase orders" (yes!) or "are prices GST inclusive" (yes they are!). We're here to help - get in touch with us to talk shop.
Have a product question? We're here to help!
Makers love reviews as much as you do, please follow this link to review the products you have purchased.
Product Comments