Although the micro:bit is a wonderful platform, the classroom management and the workshop management of all the supporting accessories is a challenge.
That's why Proto-PIC created the exhi:bit - a prototyping and development system for the BBC micro:bit.
Proto-PIC wanted to create a system where a student could go from a prototype board to a finished, more permanent project seamlessly.But importantly, They wanted to create a system where the main workhorse parts could be reused time and time again.
Exhi:bit has an edge connector socket which the micro:bit plugs into. As soon as the micro:bit is plugged in, you are ready to start creating.
|
Exhi:bit has all the micro:bit pins broken out to header connectors, for connection to plugin exhi:bit daughter boards and plugin classroom project boards, but also to generous pads on the edge of the board - so you can connect to your project with conductive thread, banana jacks or crocodile clips. |
A generous prototyping area is provided for users who wish to create permanent projects, directly onto the exhi:bit or you can use a DIY Daughterboard to easily swap projects |
Or..By using the supplied breadboard and adapter plate, temporary circuits are a breeze! |
All of the circuits you create on your exhi:bit can be powered by using a 5-9V DC power supply (not included) or the micro USB port. The micro USB port isn't intended for programming the micro:bit - we just provided it as a convenient way to power the board. The on-board regulator ensures the voltage is micro:bit friendly. |
How many times have you opened your drawer to find a board and had no idea what it was for? Three areas on the exhi:bit are provided for taking notes using a sharpie marker or similar, so you can keep track of which project is on which board - or which student has created the project. |
A range of classroom project plug in modules for the exhi:bit will be released soon.
Proto-PIC have listened to some customer feedback and updated a couple of parts. Firstly they have changed the acrylic plate so it's just covering the prototyping area and included 3 nuts and screws to secure it in place. This is a far less delicate part and shouldn't be broken as easily while now letting you write on the notes section without removing the entire plate first. Secondly they've replaced the hard plastic standoffs with adhesive rubber feet, this should help keep the exhi:bit from sliding on your desk.
Exact shipping can be calculated on the view cart page (no login required).
Products that weigh more than 0.5 KG may cost more than what's shown (for example, test equipment, machines, >500mL liquids, etc).
We deliver Australia-wide with these options (depends on the final destination - you can get a quote on the view cart page):
Non-metro addresses in WA, NT, SA & TAS can take 2+ days in addition to the above information.
Some batteries (such as LiPo) can't be shipped by Air. During checkout, Express Post and International Methods will not be an option if you have that type of battery in your shopping cart.
International Orders - the following rates are for New Zealand and will vary for other countries:
If you order lots of gear, the postage amount will increase based on the weight of your order.
Our physical address (here's a PDF which includes other key business details):
Unit 18, 132 Garden Grove Parade
Adamstown
NSW, 2289
Australia
Take a look at our customer service page if you have other questions such as "do we do purchase orders" (yes!) or "are prices GST inclusive" (yes they are!). We're here to help - get in touch with us to talk shop.
Have a product question? We're here to help!
Makers love reviews as much as you do, please follow this link to review the products you have purchased.
Product Comments