ESP32-C3 WROOM Development Board

Rating:
93% of 100
SKU: WRL-18035 Brand: Sparkfun
The ESP32-C3 WROOM Development Board is an entry-level development board based on ESP32-C3-WROOM-02, a general-purpose module with 4MB SPI flash. This boar...
$23.70 AUD, inc GST
$21.55 AUD, exc GST

In stock, ships same business day if ordered before 2PM
Delivered by Mon, 25th of Nov

Quantity Discounts:

  • 10-25 $20.90 (exc GST)
  • 25+ $20.47 (exc GST)
- +

1 from local stock, 1 supplier stock; your order will dispatch between Dec 1 to Dec 10. And yes, stock levels and lead times are accurate!

Shipping:

  • $7+ Standard (5+ days*, tracked)
  • $11+ Express (2+ days*, tracked)
  • FREE Pickup (Newcastle only - must order online*)

Shipping costs may increase for heavy products or large orders.

Exact shipping can be calculated on the view cart page.

*Conditions apply, see shipping tab below.

The ESP32-C3 WROOM Development Board is an entry-level development board based on ESP32-C3-WROOM-02, a general-purpose module with 4MB SPI flash. This board integrates complete WiFi and Bluetooth LE functions.

The Espressif ESP32-C3 is the next version of the popular ESP32 Bluetooth® and WiFi enabled module. This module features a single core, RISC-V-based processor with WiFi and Bluetooth LE 5.0 radios built into the SoC. The module features a PCB antenna and castellated plated pins for surface-mount soldering. This variation has 4 MB of on-board SPI flash and is the 85 °C temperature tolerant version.

Most of the I/O pins are broken out to the pin headers on both sides for easy interfacing. Developers can either connect peripherals with jumper wires or mount ESP32-C3-DevKitC-02 on a breadboard. Other features include a boot button, reset button, and an addressable RGB LED.

  • ESP32-C3-WROOM-02 Module with 4 MB SPI Flash
    • Bluetooth LE: Bluetooth 5, Bluetooth mesh
    • WiFi IEEE 802.11 b/g/n-compliant
    • ESP32-C3 embedded, 32-bit RISC-V single-coreprocessor, up to 160 MHz
    • 384 KB ROM
    • 400 KB SRAM (16 KB for cache)
    • 8 KB SRAM in RTC
    • 4 MB SPI flash
  • 5V to 3.3V LDO
  • 5V Power Status LED
  • All Available I/O Broken Out in Pin Headers
  • Boot Button
  • Reset Button
  • MicroUSB Connector (Power and Programming)
  • USB to UART Bridge
  • Addressable RGB LED (GPIO8)

Product Comments

Exact shipping can be calculated on the view cart page (no login required).

Products that weigh more than 0.5 KG may cost more than what's shown (for example, test equipment, machines, >500mL liquids, etc).

We deliver Australia-wide with these options (depends on the final destination - you can get a quote on the view cart page):

  • $3+ for Stamped Mail (typically 10+ business days, not tracked, only available on selected small items)
  • $7+ for Standard Post (typically 6+ business days, tracked)
  • $11+ for Express Post (typically 2+ business days, tracked)
  • Pickup - Free! Only available to customers who live in the Newcastle region (must order online and only pickup after we email to notify you the order is ready). Orders placed after 2PM may not be ready until the following business day.

Non-metro addresses in WA, NT, SA & TAS can take 2+ days in addition to the above information.

Some batteries (such as LiPo) can't be shipped by Air. During checkout, Express Post and International Methods will not be an option if you have that type of battery in your shopping cart.

International Orders - the following rates are for New Zealand and will vary for other countries:

  • $12+ for Pack and Track (3+ days, tracked)
  • $16+ for Express International (2-5 days, tracked)

If you order lots of gear, the postage amount will increase based on the weight of your order.

Our physical address (here's a PDF which includes other key business details):

Unit 18, 132 Garden Grove Parade
Adamstown
NSW, 2289
Australia

Take a look at our customer service page if you have other questions such as "do we do purchase orders" (yes!) or "are prices GST inclusive" (yes they are!). We're here to help - get in touch with us to talk shop.

Have a product question? We're here to help!

Write Your Own Review

Videos

View All

Guides

WiFi GlowBit Matrix Control with WLED and ESP32/ESP8266 Dev Boards – Make Pixel Art with No Code!

Nothing beats bright shiny colourful lights and adding an extra dimension only makes them better.&n...
Nothing beats bright shiny colourful lights and adding an extra dimension only makes them better.&n...

Understanding ESP32 Naming Conventions

Espressif is a constantly ground-breaking company that produces lots of really cool development mod...
Espressif is a constantly ground-breaking company that produces lots of really cool development mod...

The Maker Revolution

The Maker Revolution celebrates the creation of new devices and the modification of existing ones - ...
The Maker Revolution celebrates the creation of new devices and the modification of existing ones - ...

Projects

IoT Pet Feeder

The objective of this project was to create an Internet of Things (IoT) device that could give pet a...
The objective of this project was to create an Internet of Things (IoT) device that could give pet a...

IoT Chicken Shed (Arduino, Wifi)

If you have chickens and find you're not always available to close the gate at night or check the wa...
If you have chickens and find you're not always available to close the gate at night or check the wa...

AWS Lambda with Temperature data and the ESP32

In this project, I'm using an esp32 board combined with a thermistor, plus an Amazon Web Services La...
In this project, I'm using an esp32 board combined with a thermistor, plus an Amazon Web Services La...
Feedback

Please continue if you would like to leave feedback for any of these topics:

  • Website features/issues
  • Content errors/improvements
  • Missing products/categories
  • Product assignments to categories
  • Search results relevance

For all other inquiries (orders status, stock levels, etc), please contact our support team for quick assistance.

Note: click continue and a draft email will be opened to edit. If you don't have an email client on your device, then send a message via the chat icon on the bottom left of our website.

Makers love reviews as much as you do, please follow this link to review the products you have purchased.