Search results for: 'usb type-a male'

This USB A to mini B cable is perfect for connecting microcontrollers to your PC, with a strong braided cable it is sure to last through many projects.

As technology changes and adapts, so does Adafruit. This USB Type A to Type C cable will help you with the transition to USB C, even if you're still totin' around...

Standard issue USB 2.0 cables. This is the most common A to B Male/Male type peripheral cable. Compatible with most Arduino boards such as Arduino Mega, Romeo, Arduino Duemilanove.

Keep your power bank from auto-shutting off with this pre-assembled USB KeepAlive adapter, designed to maintain power delivery for low-current devices like microcontrollers, Raspberry Pi Pico, and other USB-powered projects.

The cable is easiest way ever to connect to your microcontroller/Raspberry Pi/WiFi router serial console port. Inside the big USB plug is a USBSerial conversion...

This is a 5V/3A USB-A to Type-C cable supporting large current charging and data transfer, and compatible with all USB type-C-enabled mobile phones or controller...

Make your own USB connections without slicing apart a USB cable and soldering those thin wires inside. These DIY "USB shells" are available in USB A plug, micro...

A USB 2.0 extension cable designed to achieve distances up to 5m

There's two standard ways to power electronics - USB or 5.5mm/2.1mm DC barrel jack. This or that! With this USB to 2.1mm Male Barrel Jack Cable, you can now power...

USB 2.0 type A to mini USB 5-pin. This is a new, smaller connector for USB devices. mini USB connectors are about half the height of mini USB.

his is the USB-A Male Plug to 5-pin Terminal Block. If you need to connect to a device with a USB Jack, maybe make your own USB stick or custom cable of sorts -...

This handy short USB Type-C sync & charge cable is compatible with the latest Android® smartphones and tablets. The cable is 20cm and is of a flat...

USB C is fantastic. But until we have converted all our hubs, chargers, and ports over to USB C this is the cable you’re going to need. Supporting USB 3.1 speeds...

Some days we're feeling extra fancy here at the 'fruit warehouse, and we have a big soft spot for woven fabric cables. Like, peep this fully...

If you love DIY cable-rigging, then these USB adapters are right up your alley! Making custom USB cables has never been easier. Just grab one of Adafruit's ribbon cables...

USB-C is fantastic. What makes this cable even better is that one of the features we love so much about USB-C has been replicated to the USB-A 2.0 plug! These cables...

There are a lot of devices out there that still communicate over RS232 but we bet your new laptop isn’t one of them. Don’t worry, though, we’ve got you covered. This 6ft converter plugs into your computer’s USB port and provides you with a DB-9 RSR232 connection. After installing the drivers onto your Windows, Mac or RedHat Linux system, the FTDI chipset inside the cable will enumerate as a COM port with a baud rate adjustable to whatever setup you want to connect to.

As technology changes and adapts, so does Adafruit. This USB Type A to Type C cable will help you with the transition to USB C, even if you're still totin' around...

If your computer has a USB A port still, and you want a small, cable-less way to connect our modern USB C devices, this little dongle will do the job...

As technology changes and adapts, so does Adafruit. This USB Type A to Type C cable will help you with the transition to USB C, even if you're still totin' around...

If you'd like to connect a USB-capable chip to your USB host, this cable will make the task very simple. There is no converter chip in this cable! Its basically...

You might have seen these cables used in computers. They are typically used to bring USB connections from a motherboard to the external case, or the rear expansion slots. They have a 0.1" spaced 4-pin header on one end and a USB A connector on the other.

Enables you to connect two USB devices together that each have a Type A Female

Coming soon! Sign up to be notified when these are in stockQuantum superposition is a physics concept that light and matter can be both particle and wave...

USB Type ‘A’ Male connector. Ideal for making very small USB dongle devices that plug directly into a computer USB port or through a USB AtoA extension cable.

This here is your standard A to micro-B USB cable, for USB 1.1 or 2.0, but with a twist! Literally! Instead of the cable coming straight out from the connector...

This is a simple cable that adapts from a USB port to a 5.5x2.1mm barrel connector, center positive. This cable allows the user to use a USB port on a computer, laptop, or on our cigarette power supply to provide our development boards with 5V.

Some days we're feeling extra fancy here at the 'fruit warehouse, and we have a big soft spot for colorful cables that make our projects look like...

This here is your standard A-B USB cable, for USB 1.1 or 2.0. Perfect for connecting a PC to your Arduino, USBtinyISP, or USB Boarduino (among other things). 6"...

Some days we're feeling extra fancy here at the 'fruit warehouse, and we have a big soft spot for woven fabric cables. Like, peep this fully reversible pink/purple Blinka-inspired cable or this mithril-like 3-in-1 Sync and Charge cable. Our latest addition to the collection is this 1 meter long Adafruit Black Woven USB Cable with USB Type A to Right Angle USB Type C.

USB-C is fantastic. What makes this cable even better is that one of the features we love so much about USB-C has been replicated to the USB-A 2.0 plug! These cables...

This is a flexible USB-A to USB-C cable...

This here is your standard A-miniB USB cable, for USB 1.1 or 2.0. Perfect for connecting a PC to your Teensy, USB Lipo charger (among other things). The cable is...

This here is your standard A-B USB cable, for USB 1.1 or 2.0. Perfect for connecting a PC to your Arduino, USBtinyISP (among other things). 3 feet / 1 meter long...

USB-A to USB-C with real-time display charging power, all in a 4ft cable!...