Search results for: 'rf antennas'

40 results

Particle Photon 2

Brand: Particle

Loaded with 2.4 and 5GHz WiFi, BLE 5, and much more RAM and flash - the Photon 2 is perfect for your next IoT project.

$25.95 AUD, inc GST

Interface Cable - SMA Female to SMA Male (10m, RG58)

Brand: Sparkfun
This 10m (33') SMA extension does a great job of connecting your receiver or radio to a distant antenna with as little RF loss as possible...
$33.75 AUD, inc GST

RF Explorer H-Loop Near Field Antenna (RFEAN25) (Seeed Studio)

Brand: Seeed Studio
RF Explorer RFEAH-25 is a 25mm diameter, high performance near field H-Loop antenna. RFEAH-25 is a very sensitive, compact and easy to use H-loop near...
$52.85 AUD, inc GST

RF Explorer Near Field Antenna Kit (Seeed Studio)

Brand: Seeed Studio
RF Explorer Near Field Antenna Kit is a collection of high performance set of 4 antennas designed for the most demanding RF diagnosis tasks:
$169.95 AUD, inc GST

SMA RF connector (PCB edge mount)

Brand: Sparkfun
PCB edge mount - SMA RF connector. Perfect for prototyping with the GPS and Cellular devices that require an antenna connection...
$2.60 AUD, inc GST

Female SMA to Male RP-SMA RF Adapter

Brand: Adafruit

This RF adapter bit is great for anyone doing RF work. Depending on the dev-board and antenna you have, you may be faced with either RP-SMA or SMA connectors. 

$5.75 AUD, inc GST

SMA Connector (PCB edge mount)

Brand: Sparkfun
PCB edge mount - SMA RF connector. Perfect for prototyping with the GPS and Cellular devices that require an antenna connection. These connectors have a female signal pin and will correctly mate with the original SMA type antennas.
$4.60 AUD, inc GST

SparkFun MicroMod nRF52840 Processor

Brand: Sparkfun
Featuring the nRF52840 SoC from Nordic Semiconductor, the SparkFun MicroMod nRF52840 Processor offers a powerful combination of ARM Cortex-M4 CPU and 2.4 GHz Bluetooth...
$51.75 AUD, inc GST

RP-SMA Connector (PCB edge mount)

Brand: Sparkfun
PCB edge mount Reverse Polarized - SMA RF connector. Perfect for prototyping with our RF ICs. This is a standard edge connector. The thickness between pins is 0.063" so that it can slide sideways onto a PCB. See the mechanical drawing to create your footprint.
$5.05 AUD, inc GST

Interface Cable - SMA Male to SMA Female (25cm, RG174)

Brand: Sparkfun
This is a basic SMA male to female connector cable at 25cm in length and RG174 housing...
$6.90 AUD, inc GST

SMA-BNC adapter SMA Plug to BNC Jack straight (Seeed Studio)

Brand: Seeed Studio
Most HAM and two-way handheld radio antennas and devices are designed for BNC connectors. This BNC-female to SMA-male connector will easily interface your...
$8.60 AUD, inc GST

RP-SMA to w.FL / MHF3 / IPEX3 Adapter

Brand: Adafruit
Most antennas have SMA or RP-SMA connectors on them, how are you going to connect them to your little RF module? This little cable will bridge the...
$5.95 AUD, inc GST

SparkFun LoRa Thing Plus - expLoRaBLE

Brand: Sparkfun
The SparkFun expLoRaBLE Thing Plus is a Feather-footprint development board with the NM180100 system in package (SiP), from Northern Mechatronics. Thanks to the...
$92.35 AUD, inc GST

Interface Cable - RP-SMA Male to RP-SMA Female (10M, RG58)

Brand: Sparkfun
This is a basic RP-SMA male to female connector cable at 10M in length and RG58 housing...
$44.55 AUD, inc GST

Digi XBee® RR Pro Module - U.FL Antenna

Brand: Sparkfun
The Digi XBee® RR Pro Module is an embedded solution providing fast point-to-multipoint or peer-to-peer networking via an U.FL antenna (not included)...
$82.60 AUD, inc GST

Interface Cable - RP-SMA Male to RP-SMA Female (25cm, RG174)

Brand: Sparkfun
This is a basic RP-SMA male to female connector cable at 25cm in length and RG174 housing...
$6.85 AUD, inc GST

u.FL SMT Antenna Connector

Brand: Adafruit
u.FL connectors are very small surface-mount parts used when an external RF antena is desired but a big bulky SMA connector takes up too much space. Adafruit use this part...
$1.50 AUD, inc GST

iPEX to RP-SMA Connector (65mm)

Brand: RAKwireless

Securely link LoRa modules to external antennas with iPEX MHF-1 to RP-SMA/SMA RF coaxial cables for stable signal reception.

$8.50 AUD, inc GST

Software Defined Radio Receiver USB Stick - RTL2832 w/R820T

Brand: Adafruit
If you've ever been curious about software defined radio (SDR), this USB stick is the easiest way possible to have fun with a powerful, configurable receiver. Packed...
$58.50 AUD, inc GST

Adafruit ESP32-S3 Feather 8MB with w.FL Antenna

Brand: Adafruit
Coming soon! Sign up to be notified when these are in stockThe ESP32-S3 has arrived in Feather format - and what a great way to get started with this...
$30.55 AUD, inc GST

Wide Band 4G LTE Internal FPC Antenna

Brand: Sparkfun
A Wide Band, 700-2700Mhz frequency range, 4G LTE antenna provides a wide enough range for a number of applications including BLE & LoRa/RF. This antenna is 53mm...
$4.30 AUD, inc GST

Digi XBee® RR Pro Module - SMA Antenna

Brand: Sparkfun
The Digi XBee® RR Pro Module is an embedded solution providing fast point-to-multipoint or peer-to-peer networking via an SMA antenna (not included)...
$82.70 AUD, inc GST

Interface Cable - SMA Male to SMA Female Cable (1M, RG174)

Brand: Sparkfun
This is a basic SMA male to female connector cable at 1M in length and RG174 housing...
$9.95 AUD, inc GST

RF Explorer 4G Combo PLUS - Slim (Seeed Studio)

Brand: Seeed Studio
RF Explorer 4G COMBO+ is a powerful Spectrum Analyzer, covering the full range starting at 50KHz up to 4GHz with no gaps or limitations. A future firmware license feature will allow it to expand the range up to 5.1GHz.
$529.95 AUD, inc GST

IPEX4 to SMA Wireless Communication Female Connector Cable for LattePanda 3 Delta / 2 Alpha / 2 Delta (20cm)

Brand: DFRobot
The 20cm IPEX4 to SMA Adapter Cable is designed for LattePanda SBCs wireless communication. Features high-quality, stable signal transmission and...
$1.75 AUD, inc GST

SenseCAP Solar Node P1 for Meshtastic

Brand: Seeed Studio
It is an economical solar-powered comms node or repeater based on Meshtastic. It meets basic comms needs in no - network zones. Unlike P1-Pro, P1 lacks a...
$259.95 AUD, inc GST

Copper Tape - Conductive Adhesive, 5mm (50ft)

Brand: Sparkfun
Adhesive Copper tape is a staple of any modern, STEM classroom. This roll of copper tape has conductive adhesive on one side, separated by a paper backing to the rest of the roll meaning you can cut it down, break it up and use it just as your classroom requires. It's one of the best DIY tools you can have at your disposal.
$11.50 AUD, inc GST

Vertical M.2 Expansion Support Case in Aluminum Alloy for LattePanda Sigma

Brand: DFRobot
The expandable Aluminum Alloy Vertical M.2 Expansion Support Case is designed for LattePanda Sigma, suitable for installing various non-standard M.2...
$69.35 AUD, inc GST

50cm length - SMA male to SMA female RF pigtail Coxial Cable RG316 (Seeed Studio)

Brand: Seeed Studio
RF cables are required when connecting RF Explorer to other instruments or devices. This 50cm cable is good for any frequency up to 3GHz, and can fit RF...
$18.30 AUD, inc GST

Copper Tape - Conductive Adhesive, 2" (50ft)

Brand: Sparkfun
Copper tape has countless applications in electronics from creating low-profile traces for electrical components to RF-shielding and antenna-making. Copper tape is even used to join things together using solder, like the stained glass on Tiffany lamps.
$59.95 AUD, inc GST

Copper Tape - 2" (50ft)

Brand: Sparkfun
Copper tape has countless applications in electronics from creating low-profile traces for electrical components to RF-shielding and antenna-making. Copper tape is even used to join things together using solder, like the stained glass on Tiffany lamps.
$68.80 AUD, inc GST

Copper Tape - Non-Conductive Adhesive 5mm (50ft)

Brand: Sparkfun
Copper tape has countless applications in electronics from creating low-profile traces for electrical components to RF-shielding and antenna-making. Copper tape is even used to join things together using solder, like the stained glass on Tiffany lamps.
$10.95 AUD, inc GST

SparkFun GNSS Receiver Breakout - MAX-M10S (Qwiic)

Brand: Sparkfun
The SparkFun MAX-M10S Breakout is an ultra-low-power, GNSS board that is perfect for battery operated applications that don't possess a lot of space...
$84.30 AUD, inc GST

MCX Jack to BNC RF Cable Adapter

Brand: Adafruit
This RF adapter bit is great for anyone doing RF work. If your receiver/transmitter/transceiver has an MCX connector but you really want to tie it to a BNC antenna...
$12.30 AUD, inc GST

LoRa-E5 mini (STM32WLE5JC) Dev Board

Brand: Seeed Studio
LoRa-E5 mini is a compacted-sized development board suitable for the rapid testing and building of small-size prototyping and helps you design your ideal LoRaWAN wireless IoT device with a long-distance transmission range.
$45.65 AUD, inc GST

RP-SMA Male to SMA Female Adapter

Brand: Sparkfun
This is an adapter that converts an RP-SMA board to an SMA antenna. The adapter will connect to any of our 2.4GHz wireless boards (Bluetooth, Nordic, or XBee) or interface cables and will allow you to use an antenna/cable with an SMA connection.
$4.05 AUD, inc GST

RF Explorer 6G Combo PLUS - Slim (Seeed Studio)

Brand: Seeed Studio
RF Explorer 6G COMBO+ is the most powerful Spectrum Analyzer model, covering the full 6GHz range starting at 50KHz up to 6.1GHz with no gaps or limitations.
$704.95 AUD, inc GST

Magnetic Mount SMA - 2m

Brand: Sparkfun
When experimenting with GPS or RF it can be very handy to have the antenna on the top of your house or car with a clear view of the sky while you stay in d...
$71.80 AUD, inc GST

SMA Adapter SMA Plug to SMA Jack straight - SMA Port Saver (Seeed Studio)

Brand: Seeed Studio
All RF connectors wear with use. The RF Explorer SMA ports are subject to minimal wear each time the connector interface is coupled and de-coupled with...
$16.25 AUD, inc GST

SX1262 LoRa HAT for Raspberry Pi (915MHz)

Brand: Waveshare

A LoRa expansion board for Raspberry Pi offers ultra-long-range wireless communication up to 5 km, wake-on-radio and UART control for DIY IoT applications.

$41.55 AUD, inc GST
Feedback

Please continue if you would like to leave feedback for any of these topics:

  • Website features/issues
  • Content errors/improvements
  • Missing products/categories
  • Product assignments to categories
  • Search results relevance

For all other inquiries (orders status, stock levels, etc), please contact our support team for quick assistance.

Note: click continue and a draft email will be opened to edit. If you don't have an email client on your device, then send a message via the chat icon on the bottom left of our website.

Makers love reviews as much as you do, please follow this link to review the products you have purchased.