Search results for: 'raspberry pi spacers'

This KKSB Case for Raspberry Pi 5 and M.2 NVMe HAT has been designed to seamlessly accommodate the official Raspberry Pi M.2 HAT+ for Raspberry Pi 5.

An affordable, simple solution to mounting your Raspberry Pi to your Raspberry Pi High Quality Camera.

Easily mount your Raspberry Pi to any 75mm and 100mm VESA mounts. This VESA mount is compatible with all the latest model boards (and most of the old ones)!

We've lost count of how many times we've tried to mount a camera module onto a panel or enclosure but struggled to drill the very small M2 holes right at...

Fit a pHAT fiddle-free! These solderless pogo GPIO pins, nuts, bolts, and spacers make fitting a pHAT to your Pi Zero (or Zero W) super-quick and easy. Pogo-a-go-go!

Now you can mount and display your own Raspberry Pi stack for use as a server / cluster / processing farm.

Now you can mount and display your own Raspberry Pi stack for use as a server / cluster / processing farm.

This extra-tall stackable 40-pin female header features two rows of 20 pins spaced with a 0.1″ (2.54 mm) pitch. It includes three 0.1″-thick spacers for additional clearance, and the extended pins allow multiple units to be stacked as popularized on Arduino shields. The 2×20 size is notably used on the Raspberry Pi Models A+ and B+, and the extra 0.3″ of height allows for stacked boards to clear all of the components on the Raspberry Pi B+.

An affordable, simple solution to mounting your Raspberry Pi to your Raspberry Pi High Quality Camera.

An affordable, simple solution to mounting your Raspberry Pi to your Raspberry Pi High Quality Camera.

An affordable, simple solution to mounting your Raspberry Pi to your Raspberry Pi High Quality Camera.

Keep your components separated with this 50-pack of 8mm-long (0.32") nylon spacers. These spacers have an outer diameter (OD) of 5 mm (0.20") and an inner diameter (ID) of 3.3 mm (0.13"), and they work with #2, #4, #6, M2, and M3 screws.

An affordable, simple solution to mounting your Raspberry Pi to your Raspberry Pi High Quality Camera.

When rebooting a Raspberry Pi 4, the 3.3V rail is reset which causes problems for some HATs and projects. The 3v3 Sustain solves this problem! The board...

An affordable, simple solution to mounting your Raspberry Pi to your Raspberry Pi High Quality Camera.

A VESA Mounting plate designed for use with a number of our own Raspberry Pi 4 cases, allowing you to mount your case to the rear of a VESA monitor. The...

Keep your components separated with this 50-pack of 6mm-long (0.24") nylon spacers. These spacers have an outer diameter (OD) of 4 mm (0.16") and an inner diameter (ID) of 2.7 mm (0.11"), and they work with #2 and M2 screws.

ModMyPi's new deluxe Raspberry Pi 2/3 Model B case is a fully customizable and adaptable modular unit aimed to suit a range of Raspberry Pi applications. Designed with a stealth look and integrated LED lights pipes, it’s the perfect accessory to any Raspberry Pi enthusiast’s toolkit!

This one's going out to all the makers and designers who use DIN railing in their builds. This adapter plate is perfect for simplifying complex wiring. It's pretty...

The Motoron M2H18v20 Dual High-Power Motor Controller makes it easy to control DC motors from a Raspberry Pi (Model B+ or newer) through an I²C interface....

Keep your components separated with this 50-pack of 6mm-long (0.24") nylon spacers. These spacers have an outer diameter (OD) of 5 mm (0.20") and an inner diameter (ID) of 3.3 mm (0.13"), and they work with #2, #4, #6, M2, and M3 screws.

Keep your components separated with this 10-pack of 22mm-long (7/8") nylon spacers. These spacers have an outer diameter (OD) of 4 mm (0.16") and an inner...

Keep your components separated with this 50-pack of 4mm-long (0.16") nylon spacers. These spacers have an outer diameter (OD) of 5 mm (0.20") and an inner diameter (ID) of 3.3 mm (0.13"), and they work with #2, #4, #6, M2, and M3 screws.

Keep your components separated with this 25-pack of 15mm-long (0.59") nylon spacers. These spacers have an outer diameter (OD) of 5 mm (0.20") and an inner diameter (ID) of 3.3 mm (0.13"), and they work with #2, #4, #6, M2, and M3 screws.

Spacers can provide clearance, adjust the distance between parallel parts, add structural integrity, add a threaded hole for mounting other components, or mount a bearing on in a rotating assembly.

Keep your components separated with this 10-pack of 25mm-long (0.98") nylon spacers. These spacers have an outer diameter (OD) of 4 mm (0.16") and an inner diameter (ID) of 2.7 mm (0.11"), and they work with #2 and M2 screws.

Keep your components separated with this 25-pack of 10mm-long (0.39") nylon spacers. These spacers have an outer diameter (OD) of 4 mm (0.16") and an inner diameter (ID) of 2.7 mm (0.11"), and they work with #2 and M2 screws.