Search results for: 'pcb standoff'

33 results

10 sets M3 * 10 nylon standoff

Brand: DFRobot
These screw can be used to isloate your circuit board. It is suitable for all kinds of circuit boards, sensors, mechanical mounting.
$2.37 AUD, inc GST

Standoff Kit - 210 Piece

Brand: SparkFun
This 210 piece brass standoff kit insures you'll always have a set handy...
$40.45 AUD, inc GST

Aluminum Standoff for Raspberry Pi: 11mm Length, 6mm M2.5 Thread, M-F (4-Pack)

Brand: Pololu
These hexagonal male-female aluminum standoffs are intended specifically for use with the Raspberry Pi. They keep parts spaced 11 mm apart, which is just...
$5.55 AUD, inc GST

Aluminum Standoff for Raspberry Pi: 18.6mm Length, 6mm M2.5 Thread, M-F (4-Pack)

Brand: Pololu
These hexagonal male-female aluminum standoffs are intended specifically for use with the Raspberry Pi. They keep parts spaced 18.6 mm apart, which is...
$6.50 AUD, inc GST

M3 Mounting Kit (Standoffs)

Brand: DFRobot

This M3 mounting kit provides you with different types of standoffs with screws and nuts which are most commonly used in DFRobot's projects. We use them to mount circuit boards and help build robots.

$39.74 AUD, inc GST

M2.5 Standoffs for Pi HATs

Brand: Pimoroni
These standoffs are perfect for keeping your HATs off of your Raspberry Pi
$3.95 AUD, inc GST

Short 7mm Pi HAT standoffs

Brand: Pimoroni
These short standoffs will let you securely attach compatible HATs to a Pi Zero or Zero W, to make a nice, slim sandwich…
$6.30 AUD, inc GST

Aluminum Standoff for Raspberry Pi: 11mm Length, 4mm M2.5 Thread, M-F (4-Pack)

Brand: Pololu
These hexagonal male-female aluminum standoffs are intended specifically for use with the Raspberry Pi. They keep parts spaced 11 mm apart, which is just...
$5.45 AUD, inc GST

Board Edge Mounting Kit - Pack of 4

Brand: Adafruit
Having difficulty attaching a PCB? This kit is especially useful when there are no mounting holes - as with the original Raspberry Pi. Instead of gluing, taping...
$5.95 AUD, inc GST

Alchitry Standoff Hardware

Brand: SparkFun
Protect your Alchitry board by adding these stylish standoffs! The bolts protrude about 2mm below the board which is just further than the lowest part on...
$6.15 AUD, inc GST

SMT / Solderable Standoff Nuts - M3 x 6mm - 10 pack

Brand: Adafruit
These brilliant solder-able standoffs will make your mechanical PCB mounting problems go away. They're super simple - round M3 standoffs that are coated with tin...
$6.10 AUD, inc GST

Nylon Spacer: 2mm Length, 5mm OD, 3.3mm ID (50-Pack)

Brand: Pololu
Keep your components separated with this 50-pack of 2mm-long (0.08") nylon spacers. These spacers have an outer diameter (OD) of 5 mm (0.20") and an inner diameter (ID) of 3.3 mm (0.13"), and they work with #2, #4, #6, M2, and M3 screws.
$5.65 AUD, inc GST

1500 Series Plastic Spacer (6mm ID x 8mm OD, 1mm Thickness) - 12 Pack

Brand: goBILDA
A plastic spacer with an inner diameter for 6mm
$3.90 AUD, inc GST

1502 Series 4mm ID Spacer (6mm OD, 4mm Length) - 4 Pack

Brand: goBILDA
A 4mm long aluminium spacer with an inner diameter of 4mm
$3.20 AUD, inc GST

1502 Series 4mm ID Spacer (6mm OD, 2mm Length) - 4 Pack

Brand: goBILDA
A 2mm long aluminium spacer with an inner diameter of 4mm
$2.95 AUD, inc GST

SMT / Solderable Standoff Nuts - M3 x 3mm - 10 pack

Brand: Adafruit
These brilliant solder-able standoffs will make your mechanical PCB mounting problems go away. They're super simple - round M3 standoffs that are coated with tin...
$5.70 AUD, inc GST

1500 Series Plastic Spacer (3mm ID x 5mm OD, 1mm Thickness) - 12 Pack

Brand: goBILDA
A plastic washer with an inner diameter for 3mm
$3.65 AUD, inc GST

1502 Series 4mm ID Spacer (6mm OD, 11mm Length) - 4 Pack

Brand: goBILDA
A 4 pack of aluminium spacers (11mm long, inner diameter of 4mm)
$3.95 AUD, inc GST

1502 Series 4mm ID Spacer (6mm OD, 1mm Length) - 4 Pack

Brand: goBILDA
A 1mm long aluminium spacer with an inner diameter of 4mm
$2.80 AUD, inc GST

1502 Series 4mm ID Spacer (6mm OD, 8mm Length) - 4 Pack

Brand: goBILDA
A 8mm long aluminium spacer with an inner diameter of 4mm
$3.60 AUD, inc GST

1501 Series M4 x 0.7mm Standoff (6mm OD, 44mm Length) - 4 Pack

Brand: goBILDA
A 44mm long aluminium standoff for M4 threaded screws
$8.60 AUD, inc GST

1501 Series Standoffs Bundle

Brand: goBILDA
Standoffs can provide clearance, adjust the distance between parallel parts, add structural integrity, add a threaded hole for mounting other components, or mount a bearing on in a rotating assembly.
$229.95 AUD, inc GST

DINrPlate Universal - PCB DIN Rail Mount

Brand: Core Electronics
The DINrPlate Universal is an innovative universal DIN Rail mounting solution with sliding, rotating standoffs allowing it to accommodate a wide range of...
$32.40 AUD, inc GST

Pimoroni Yellow/Black/White – Inky wHAT (ePaper/eInk/EPD)

Brand: Pimoroni
Inky wHAT is a 400x300 pixel electronic paper (ePaper / eInk / EPD) display for Raspberry Pi
$114.95 AUD, inc GST

Adafruit Swirly Aluminum Mounting Grid for 0.1" Spaced PCBs - 5x5

Brand: Adafruit
With most of our dev boards, sensors and feathers now sporting plug-and-play stemma QT ports it can be very fast to put together projects with half a...
$8.25 AUD, inc GST

Pimoroni pHAT Stack

Brand: Pimoroni
A preposterous pile of peripherals on your Pi! Mix and match 3 HATs or 5 pHATs into a platter of functionality. Use pHAT Stack for specific setups and projects, or just as a handy way to use several HATs or pHATs at once.
$44.55 AUD, inc GST

Bus Blaster v3 acrylic case v1 (SoBv1-DP8049) (Seeed Studio)

Brand: Seeed Studio
A clear laser-cut acrylic case kit for the Bus Blaster v3. This case is designed to be simple, cheap, and easy to assemble. The Bus Blaster PCB is sandwiched...
$6.85 AUD, inc GST
Similar matches

Pololu 400-Point Breadboard with Mounting Holes

Brand: Pololu
This 3.2" × 2.1" solderless breadboard has four bus lines spanning the length of the board and 30 rows of pins, enough for up to four 14-pin DIP ICs or...
$12.85 AUD, inc GST

Pimoroni Mini Black HAT Hack3r

Brand: Pimoroni
Need to detach or debug your HAT? Then the Mini Black HAT Hack3r is for you!
$33.20 AUD, inc GST

Adafruit Swirly Aluminum Mounting Grid for 0.1" Spaced PCBs

Brand: Adafruit
With most of our dev boards, sensors and feathers now sporting plug-and-play stemma QT ports it can be very fast to put together projects with half a...
$11.45 AUD, inc GST

Adafruit Swirly Aluminum Mounting Grid for 0.1" Spaced PCBs - 2x10

Brand: Adafruit
With most of our dev boards, sensors and feathers now sporting plug-and-play stemma QT ports it can be very fast to put together projects with half a...
$7.95 AUD, inc GST

Adafruit Swirly Aluminum Mounting Grid for 0.1" Spaced PCBs - 10x10

Brand: Adafruit
With most of our dev boards, sensors and feathers now sporting plug-and-play stemma QT ports it can be very fast to put together projects with half a...
$17.70 AUD, inc GST

Metal Rework Station Stand with Two Clips and Four PCB Holders

Brand: Adafruit
This mini rework station is great for electronic work and repair. These were initially marketed for people doing cell phone repair and rework, and...
$139.95 AUD, inc GST
Feedback

Please continue if you would like to leave feedback for any of these topics:

  • Website features/issues
  • Content errors/improvements
  • Missing products/categories
  • Product assignments to categories
  • Search results relevance

For all other inquiries (orders status, stock levels, etc), please contact our support team for quick assistance.

Note: click continue and a draft email will be opened to edit. If you don't have an email client on your device, then send a message via the chat icon on the bottom left of our website.

Makers love reviews as much as you do, please follow this link to review the products you have purchased.