Search results for: '5mm standoff'

50 results

1501 Series M4 x 0.7mm Standoff (6mm OD, 5mm Length) - 4 Pack

Brand: goBILDA
5mm length standoffs can be used as a fastener in a corner or space with low clearance, a shoulder on an M4 screw, a shaft for a 4mm ID.....
$4.20 AUD, inc GST

Alchitry Standoff Hardware

Brand: SparkFun
Protect your Alchitry board by adding these stylish standoffs! The bolts protrude about 2mm below the board which is just further than the lowest part on...
$6.15 AUD, inc GST

Aluminum Standoff: 1" Length, 2-56 Thread, M-F (4-Pack)

Brand: Pololu
These hexagonal male-female aluminum standoffs keep parts spaced 1.0" (25 mm) apart and are great for building a multi-level robot chassis. Both ends of these 3/16"-wide standoffs have 2-56 threads. The standoffs are sold in packs of 4.
$6.45 AUD, inc GST

Aluminum Standoff: 1/2" Length, 4-40 Thread, F-F (4-Pack)

Brand: Pololu
These 1/2"-long hexagonal female-female aluminum standoffs keep parts spaced 0.5 inches (13 mm) apart. They are like elongated, 3/16″-wide hex nuts, with 4-40 threads running through the entire length of each standoff. They are sold in packs of 4.
$7.20 AUD, inc GST

1516 Series 8mm REX Standoff (M4 x 0.7mm Threads, 32mm Length) - 4 Pack

Brand: goBILDA
The 32mm length, M4-threaded, 8mm REX Standoff provides clearance, adjusts distances between parallel parts, and reinforces structures. You.....
$7.95 AUD, inc GST

1516 Series 8mm REX Standoff (M4 x 0.7mm Threads, 64mm Length) - 4 Pack

Brand: goBILDA
The 64mm length, M4-threaded, 8mm REX Standoff provides clearance, adjusts distances between parallel parts, and reinforces structures. You.....
$11.70 AUD, inc GST

1516 Series 8mm REX Standoff (M4 x 0.7mm Threads, 264mm Length) - 4 Pack

Brand: goBILDA
The 264mm length, M4-threaded, 8mm REX Standoff provides clearance, adjusts distances between parallel parts, and reinforces structures....
$34.35 AUD, inc GST

1516 Series 8mm REX Standoff (M4 x 0.7mm Threads, 56mm Length) - 4 Pack

Brand: goBILDA
The 56mm length, M4-threaded, 8mm REX Standoff provides clearance, adjusts distances between parallel parts, and reinforces structures. You.....
$10.70 AUD, inc GST

1516 Series 8mm REX Standoff (M4 x 0.7mm Threads, 36mm Length) - 4 Pack

Brand: goBILDA
The 36mm length, M4-threaded, 8mm REX Standoff provides clearance, adjusts distances between parallel parts, and reinforces structures. You.....
$8.45 AUD, inc GST

Aluminum Standoff: 1-1/4" Length, 2-56 Thread, M-F (4-Pack)

Brand: Pololu
These hexagonal male-female aluminum standoffs keep parts spaced 1.25" (32 mm) apart and are great for building a multi-level robot chassis. Both ends of these 3/16"-wide standoffs have 2-56 threads. The standoffs are sold in packs of 4.
$8.55 AUD, inc GST

Aluminum Standoff: 1-1/2" Length, 2-56 Thread, M-F (4-Pack)

Brand: Pololu
These hexagonal male-female aluminum standoffs keep parts spaced 1.5" (38 mm) apart and are great for building a multi-level robot chassis. Both ends of...
$8.95 AUD, inc GST

Aluminum Standoff: 1-1/4" Length, 4-40 Thread, M-F (4-Pack)

Brand: Pololu
These hexagonal male-female aluminum standoffs keep parts spaced 1.25" (32 mm) apart and are great for building a multi-level robot chassis. Both ends of these 3/16"-wide standoffs have 4-40 threads. The standoffs are sold in packs of 4.
$8.40 AUD, inc GST

Aluminum Standoff: 1/2" Length, 2-56 Thread, M-F (4-Pack)

Brand: Pololu
These hexagonal male-female aluminum standoffs keep parts spaced 0.5" (13 mm) apart and are great for building a multi-level robot chassis. Both ends of these 3/16"-wide standoffs have 2-56 threads. The standoffs are sold in packs of 4.
$4.95 AUD, inc GST

1516 Series 8mm REX Standoff (M4 x 0.7mm Threads, 16mm Length) - 4 Pack

Brand: goBILDA
The 16mm length, M4-threaded, 8mm REX Standoff provides clearance, adjusts distances between parallel parts, and reinforces structures. You.....
$6.10 AUD, inc GST

1516 Series 8mm REX Standoff (M4 x 0.7mm Threads, 43mm Length) - 4 Pack

Brand: goBILDA
The 43mm length, M4-threaded, 8mm REX Standoff provides clearance, adjusts distances between parallel parts, and reinforces structures. You.....
$9.10 AUD, inc GST

Aluminum Standoff: 1" Length, 4-40 Thread, M-F (4-Pack)

Brand: Pololu
These hexagonal male-female aluminum standoffs keep parts spaced 1.0" (25 mm) apart and are great for building a multi-level robot chassis. Both ends of these 3/16"-wide standoffs have 4-40 threads. The standoffs are sold in packs of 4.
$7.85 AUD, inc GST

Aluminum Standoff: 1/4" Length, 2-56 Thread, M-F (4-Pack)

Brand: Pololu
These hexagonal male-female aluminum standoffs keep parts spaced 0.25" (6 mm) apart and are great for building a multi-level robot chassis. Both ends of these 3/16"-wide standoffs have 2-56 threads. The standoffs are sold in packs of 4.
$5.05 AUD, inc GST

1516 Series 8mm REX Standoff (M4 x 0.7mm Threads, 22mm Length) - 4 Pack

Brand: goBILDA
The 22mm length, M4-threaded, 8mm REX Standoff provides clearance, adjusts distances between parallel parts, and reinforces structures. You.....
$6.75 AUD, inc GST
Similar matches

10 sets M3 * 10 nylon standoff

Brand: DFRobot
These screw can be used to isloate your circuit board. It is suitable for all kinds of circuit boards, sensors, mechanical mounting.
$2.37 AUD, inc GST

Standoff Kit - 210 Piece

Brand: SparkFun
This 210 piece brass standoff kit insures you'll always have a set handy...
$40.45 AUD, inc GST

M2.5 Standoffs for Pi HATs

Brand: Pimoroni
These standoffs are perfect for keeping your HATs off of your Raspberry Pi
$3.95 AUD, inc GST

Aluminum Standoff for Raspberry Pi: 18.6mm Length, 6mm M2.5 Thread, M-F (4-Pack)

Brand: Pololu
These hexagonal male-female aluminum standoffs are intended specifically for use with the Raspberry Pi. They keep parts spaced 18.6 mm apart, which is...
$6.50 AUD, inc GST

Aluminum Standoff for Raspberry Pi: 11mm Length, 6mm M2.5 Thread, M-F (4-Pack)

Brand: Pololu
These hexagonal male-female aluminum standoffs are intended specifically for use with the Raspberry Pi. They keep parts spaced 11 mm apart, which is just...
$5.55 AUD, inc GST

Brass M2.5 Standoffs for Pi HATs - Black Plated - Pack of 2

Brand: Adafruit
"These go to eleven." 11 millimeters that is! Adafruit's Black Plated M/F Brass Standoffs are engineered specifically to keep your Pi HAT snug on your Pi while also keeping...
$1.90 AUD, inc GST

Brass M2.5 Standoffs 16mm tall - Black Plated - Pack of 2

Brand: Adafruit
Finally Adafruit get Adafruit's very own super sweet sixteen... 16 millimeters that is! Adafruit's Black Plated M/F Brass 16mm Standoffs are engineered specifically to keep your PiTFT...
$2.95 AUD, inc GST

Short 7mm Pi HAT standoffs

Brand: Pimoroni
These short standoffs will let you securely attach compatible HATs to a Pi Zero or Zero W, to make a nice, slim sandwich…
$6.30 AUD, inc GST

Aluminum Standoff for Raspberry Pi: 11mm Length, 4mm M2.5 Thread, M-F (4-Pack)

Brand: Pololu
These hexagonal male-female aluminum standoffs are intended specifically for use with the Raspberry Pi. They keep parts spaced 11 mm apart, which is just...
$5.45 AUD, inc GST

1501 Series M4 x 0.7mm Standoff (6mm OD, 14mm Length) - 4 Pack

Brand: goBILDA
14mm length standoffs can be used to add structural rigidity between parallel plates, as a stub-axle to run bearings and rotating...
$5.20 AUD, inc GST

SMT / Solderable Standoff Nuts - M3 x 6mm - 10 pack

Brand: Adafruit
These brilliant solder-able standoffs will make your mechanical PCB mounting problems go away. They're super simple - round M3 standoffs that are coated with tin...
$6.10 AUD, inc GST

5mm Plastic Bevel LED Holder - Pack of 5

Brand: Adafruit
Keep your 5mm LEDs in place with these little plastic LED holders. These are handy for projects using individual LEDs as they look sleek, and your LED won't budge...
$1.95 AUD, inc GST

1501 Series M4 x 0.7mm Standoff (6mm OD, 60mm Length) - 4 Pack

Brand: goBILDA
A 60mm long aluminium standoff for M4 threaded screws
$10.30 AUD, inc GST

5mm Pitch HTD Timing Belt & Pulley Starter Pack (8mm REX™ Bore)

Brand: goBILDA
Pulleys are fantastic solutions for smooth, reliable power transfer in all kinds of applications. The large tooth profile of 5mm pitch HTD.....
$339.95 AUD, inc GST

Nylon Spacer: 2mm Length, 5mm OD, 3.3mm ID (50-Pack)

Brand: Pololu
Keep your components separated with this 50-pack of 2mm-long (0.08") nylon spacers. These spacers have an outer diameter (OD) of 5 mm (0.20") and an inner diameter (ID) of 3.3 mm (0.13"), and they work with #2, #4, #6, M2, and M3 screws.
$5.65 AUD, inc GST

1501 Series M4 x 0.7mm Standoff (6mm OD, 40mm Length) - 4 Pack

Brand: goBILDA
A 40mm long aluminium standoff for M4 threaded screws
$8.10 AUD, inc GST

1501 Series M4 x 0.7mm Standoff (6mm OD, 22mm Length) - 4 Pack

Brand: goBILDA
A 22mm long aluminium standoff for M4 threaded screws
$6.10 AUD, inc GST

1501 Series M4 x 0.7mm Standoff (6mm OD, 20mm Length) - 4 Pack

Brand: goBILDA
A 20mm long aluminium standoff for M4 threaded screws
$5.90 AUD, inc GST

1501 Series M4 x 0.7mm Standoff (6mm OD, 30mm Length) - 4 Pack

Brand: goBILDA
A 30mm long aluminium standoff for M4 threaded screws
$6.95 AUD, inc GST

1501 Series M4 x 0.7mm Standoff (6mm OD, 18mm Length) - 4 Pack

Brand: goBILDA
18mm length standoffs can be used to add structural rigidity between parallel plates, as a dead-axle to run bearings and rotating...
$5.55 AUD, inc GST

1501 Series M4 x 0.7mm Standoff (6mm OD, 8mm Length) - 4 Pack

Brand: goBILDA
8mm length standoffs can be used to add structural rigidity between parallel plates, as a stub-axle to run bearings and rotating components.....
$4.55 AUD, inc GST

1501 Series M4 x 0.7mm Standoff (6mm OD, 7mm Length) - 4 Pack

Brand: goBILDA
7mm length standoffs can be used to add structural rigidity between parallel plates, a fastener in a corner or space with low clearance, a.....
$4.40 AUD, inc GST
Feedback

Please continue if you would like to leave feedback for any of these topics:

  • Website features/issues
  • Content errors/improvements
  • Missing products/categories
  • Product assignments to categories
  • Search results relevance

For all other inquiries (orders status, stock levels, etc), please contact our support team for quick assistance.

Note: click continue and a draft email will be opened to edit. If you don't have an email client on your device, then send a message via the chat icon on the bottom left of our website.

Makers love reviews as much as you do, please follow this link to review the products you have purchased.