Search results for: 'm2 bolts'

Add two super-fast NVMe SSDs to your Raspberry Pi 5! Ideal if you need redundancy or just a load more storage on your RPi....

This M3, pan-head screw is 8 mm long. It is made from steel, is zinc-plated, and comes in packs of 25.

Mount your project onto support material up to 3mm thick.

Suitable for all kinds of circuit boards, sensors, mechanical support of the installation. They are great for building a multi-level robot chassis. This 10-pack of standoffs includes 10 sets screws and nuts for securing the top of the standoff to your project.

The mounting kit is an M2 screw set with screws, nuts and a variety of lengths of single-head, double-pass hexagonal copper columns, for a total of 320 pieces. The...

The mounting kit is an M2 screw set with screws, nuts and a variety of lengths of single-head, double-pass white nylon columns, for a total of 260 pieces. The M2-size...

This M2.5 hex nut is made from steel, is zinc-plated, and comes in packs of 25...

This M3, pan-head screw is 12 mm long. It is made from steel, is zinc-plated, and comes in packs of 25...

This M3 hex nut is made from steel, is zinc-plated, and comes in packs of 25.

These universal aluminum mounting hubs allow you to mount custom wheels and mechanisms to 8 mm diameter motor shafts. The set includes two hubs, four M3 set screws for securing the hubs to motor shafts, and one 1.5 mm Allen wrench for use with the set screws. Each hub has six threaded mounting holes for M3 screws (not included).

This M3, pan-head screw is 10 mm long. It is made from steel, is zinc-plated, and comes in packs of 25.

These universal aluminum mounting hubs allow you to mount custom wheels and mechanisms to 4 mm diameter motor shafts. The set includes two hubs, two M3 set screws for securing the hubs to motor shafts, and one 1.5 mm Allen wrench for use with the set screws. Each hub has four threaded mounting holes for M3 screws (not included).

These universal aluminum mounting hubs allow you to mount custom wheels and mechanisms to 6 mm diameter motor shafts. The set includes two hubs, four M3 set screws for securing the hubs to motor shafts, and one 1.5 mm Allen wrench for use with the set screws. Each hub has six threaded mounting holes for M3 screws (not included).

These universal aluminum mounting hubs allow you to mount custom wheels and mechanisms to 5 mm diameter motor shafts. The set includes two hubs, two M3 set screws for securing the hubs to motor shafts, and one 1.5 mm Allen wrench for use with the set screws. Each hub has four threaded mounting holes for M3 screws (not included).

Finally Adafruit get Adafruit's very own super sweet sixteen... 16 millimeters that is! Adafruit's Black Plated M/F Brass 16mm Standoffs are engineered specifically to keep your PiTFT...

This M3, pan-head screw is 5 mm long. It is made from steel, is zinc-plated, and comes in packs of 25.

These screws can be used to install your circuit board, sensors and mechanical mounting.

This M3, pan-head screw is 7 mm long. It is made from steel, is zinc-plated, and comes in packs of 25...

Socket head screws are our go-to fastener in the R&D department. The 3mm drive accompanied by a deep hex drive depth ensures you can torque these screws down again and again without fear of stripping the drive out.

These screws can be used to install your circuit board, sensors and mechanical mounting.

This M3, pan-head screw is 20 mm long. It is made from steel, is zinc-plated, and comes in packs of 25...

This M3, pan-head screw is 6 mm long. It is made from steel, is zinc-plated, and comes in packs of 25...

These are M3 hex head cap screw, which provides a more secure way to install circuit boards, sensors and mechanical mounting.

These are M3 hex head cap screw, which provides a more secure way to install circuit boards, sensors and mechanical mounting.

This is an M3 Hex nut for use with M3 screws...

A 5-pack of the M.2 screws that SparkFun uses with the MicroMod ecosystem...

A pack of 10, M3 serrated flange nuts. These nuts can be used to install your circuit boards, sensors, and mechanically mount other parts.

This Premium Thread-Locking M4 Socket Head Screw has a super-resilient grade 12.9 material and a blue nylon patch that provides for.....

This M3, pan-head screw is 16 mm long. It is made from steel, is zinc-plated, and comes in packs of 25...

This Premium Thread-Locking M4 Socket Head Screw has a super-resilient grade 12.9 material and a blue nylon patch that provides for.....

These universal aluminum mounting hubs allow you to mount custom wheels and mechanisms to 3 mm diameter motor shafts. The set includes two hubs, two M3 set screws for securing the hubs to motor shafts, and one 1.5 mm Allen wrench for use with the set screws. Each hub has four threaded mounting holes for M3 screws (not included).

These M4 locknuts have a nylon insert that the threads of a mating screw must form threads in upon insertion. The displaced nylon will.....

These universal aluminum mounting hubs allow you to mount custom wheels and mechanisms to 1/4 inch diameter motor shafts. The set includes two hubs, four M3 set screws for securing the hubs to motor shafts, and one 1.5 mm Allen wrench for use with the set screws. Each hub has four threaded mounting holes for M3 screws (not included).

This Premium Thread-Locking M4 Socket Head Screw has a super-resilient grade 12.9 material and a blue nylon patch that provides for.....

For all the DIY keebfans in the house here is a very fancy and sturdy 4x4 Keypad Shell in Dark Gray with silver accents, the...

For all the DIY keebfans in the house here is a super sleek and sturdy 4-Key Aluminum Keypad Shell in Silver, the perfect base to...

These brilliant solder-able standoffs will make your mechanical PCB mounting problems go away. They're super simple - round M3 standoffs that are coated with tin...