Search results for: &#039;jst jumper cables&#039;

This 5-conductor, 10 cm (4") cable has 24 AWG wires and 5-pin female JST PH-type connectors (2mm pitch) on both ends...

JST PH-Style Cable, 5-Pin, Female-Female, 10cm

Brand: Pololu

$4.70 AUD, inc GST

JST SH Jumper 6 Wire - 1 Foot

This is a 1 foot long JST SH communication cable which can be cut and hacked to your needs. Ideal if you have a UAV project where the GPS module may be a distance away from the controller board. Cable has two 6-pin JST connectors with 1mm pitch. Wired pin 1 to pin 1.

$6.80 AUD, inc GST

JST-PH Jumper 2 Wire Assembly

This is a simple two wire cable. Great for jumping from board to board or just about anything else. There is a 2-pin JST connector on one end, bare cable on the opposite end. It also comes with the mating connector for the JST.

$2.20 AUD, inc GST

In stock — Delivered by Nov 17th

This cable will make it super easy to use Adafruit's plug-and-play STEMMA QT boards with boards like Circuit Playground. On one end you get a Qwiic / STEMMA QT connector...

JST SH 4-pin Cable with Alligator Clips - STEMMA QT / Qwiic

Brand: Adafruit

$6.15 AUD, inc GST

Out of stock

This 25 cm (10") cable has six 28 AWG wires and 6-pin female JST SH-type connectors on both ends. These connectors work with our Micro Metal Gearmotor ...

6-Pin Female-Female JST SH-Style Cable 25cm

Brand: Pololu

$6.85 AUD, inc GST

JST-PH Jumper 4 Wire Assembly

This is a simple four wire cable. Great for jumping from board to board or just about anything else. There is a 4-pin JST connector on one end, bare cable on the opposite end. It also comes with the mating connector for the JST.

$3.50 AUD, inc GST

JST PH to Breadboard Jumper (3-pin)

This is a simple jumper adapter cable that comes pre-terminated with a female JST connector on one end and a breadboard hookup pigtail on the other. This cable makes it easy to connect components with a JST connector to a breadboard or an Arduino-based device’s pins.

$2.95 AUD, inc GST

Jumper Wire - 0.1", 2-pin, 6"

This is a simple two wire cable. Great for jumping from board to board or just about anything else. There is a 2-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.

$3.55 AUD, inc GST

Flexible Qwiic Cable - 50mm

This is a 50mm long 4-conductor cable with 1mm JST termination. It’s designed to connect Qwiic enabled components together but can be used for other applications...

$2.75 AUD, inc GST

Plug this cable directly into the encoder found on 5000 Series Motors and 52xx Series Gear Motors to connect it to your project. The cable.....

Encoder Breakout Cable (4-Pos JST XH [MH-FC] to 4 x 1-Pos TJC8 [FH-MC], 300mm Length)

Brand: goBILDA

$6.75 AUD, inc GST

Jumper Wire - 0.1", 4-pin, 12"

This is a simple four wire cable. Great for jumping from board to board or just about anything else. There is a 4-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.

$4.70 AUD, inc GST

Jumper Wire - JST-PH Black Red

This is a simple two wire cable. Great for jumping from board to board. 2-pin JST-PH connector on one end, bare cable on the opposite end.

$1.90 AUD, inc GST

Barrel Jack to 2-pin JST PH 2mm

Two pin JST PH 2mm connector to a 2.1x 5.5mm barrel jack, 6.25 inch long jumper cable. We use this cable to adapt from a wall power supply to a relatively small, SMD JST connector. We found that many of the SMD connectors used for battery charging were too large or were not capable of through-putting the current we wanted for faster charging. This setup, with a SMD JST connector and wall power supply, can handle up to 2A!

$6.10 AUD, inc GST

Out of stock

Jumper Wire - 0.1", 3-pin, 4"

This is a simple three wire cable. Great for jumping from board to board or just about anything else. There is a 3-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.

$2.70 AUD, inc GST

In stock — Delivered by Nov 17th

JST PH 4-Pin Socket to Color Coded Cable - 200mm

Brand: Adafruit

This cable will let you turn a JST PH 4-pin cable socket into 4 individual tinned wires. These are great to match up with Adafruit's JST 4-PH cables, for extending and...

$2.10 AUD, inc GST