Search results for: 'USB Adapter A to Mini-B'

This handy USB extension cable will make it easy for you to enclose a device that has a mini-B USB type port. We think this would be most handy when putting a Teensy...

The 18-channel Mini Maestro 18 raises the performance bar for serial servo controllers with features such as a native USB interface and internal scripting control. Whether you want the best servo control available (0.25μs resolution with built-in speed and acceleration control and pulse rates up to 333 Hz) or a general I/O controller (e.g. to interface with a sensor or ESC via your USB port), this compact, versatile device will deliver. This fully-assembled version ships with header pins installed.

This is the newest revision and fixes issues with the last board. This breakout board pairs an SP3485 RS-485 transceiver with an FT232RL USB UART IC to convert a USB stream to RS-485. The SP3485 is a half-duplex transceiver, so it can only communicate one way at a time, but it can reach transmission speeds of up to 10Mbps.

This is the newest revision of our FTDI Basic. We now use a SMD 6-pin header on the bottom, which makes it smaller and more compact. Functionality has remained the same.

The SparkFun 3.3V FTDI Starter Kit gives you just what you need to get started with FTDI FT232RL USB to serial IC. The pinout of the included board matches the FTDI...

This device is a programmer for AVR-based controllers, such as Pololu's Orangutan robot controllers and the 3pi robot. The programmer emulates an STK500 on a virtual serial port, making it compatible with standard AVR programming software. Two additional features help with building and debugging projects: a TTL-level serial port for general-purpose communication and a SLO-scope for monitoring signals and voltage levels. A USB cable and ISP cable are included.

NOTE: This product is only designed for use with solar panels sold at the Adafruit store. Adafruit cannot guarantee this will work with solar panels purchased elsewhere...

The RFID USB Reader is a simple to use, USB to serial base unit for the ID-3LA, ID-12LA, and ID-20LA readers. Simply plug a reader into the headers and attach a miniUSB cable. Open a terminal program of your choice at 9600bps 8N1, then scan your 125kHz ID tag and the unique 32-bit ID will be shown on the screen. The unit is based on a FTDI chip and comes with a read LED and buzzer.

It’s tiny, it’s handy, and it can give your normal USB-equipped device a micro-B connector! With the USB to Micro-B Adapter you can make a flash drive connect to...

This USB A to mini B cable is perfect for connecting microcontrollers to your PC, with a strong braided cable it is sure to last through many projects.

The Boe-Bot Robot Kit is an educational kit complete with parts and a textbook for building and programming your own Boe-Bot robot. No previous robotics,...

This adaptor allows older-style Raspberry Pi Power Supplies to be used on the newer Raspberry Pi 4 Model B.

This adaptor allows older-style Raspberry Pi Power Supplies to be used on the newer Raspberry Pi 4 Model B.

This is a simple cable that adapts from a USB port to a 5.5x2.1mm barrel connector, center positive. This cable allows the user to use a USB port on a computer, laptop, or on our cigarette power supply to provide our development boards with 5V.

This is a nice solution to wanting to use PS/2 devices (such as Adafruit's capacitive touch pad or magstripe readers). It's also handy if you want to connect a keyboard...

Need more gigabytes on your Pi? Connect a SATA hard disk or SSD to your Raspberry Pi with this compact and high-performance USB to SATA adapter.

As technology changes and adapts, so does Adafruit, and speaking of adapting, this adapter has a USB A plug and a USB C socket so your older computer or laptop can...

This super slim, super tiny, and super cute Micro-B to USB on-the-go adapter is so slim, tiny, and cute that we'd pinch its cheeks if it was big enough to have cheeks...

This is a DC5.5mm*2.1mm female to USB Micro male power adapter plug that can power your mobile phones, tablets, Raspberry Pi, and LattePanda devices. Note: This...

As technology changes and adapts, so does Adafruit, and speaking of adapting, this adapter has a 2.1mm barrel jack socket and a USB C plug - you could use this to power a USB C device from a common wall adapter.