Search results for: '24 inch wire'

This spool of enamelled copper wire is approx. 57m in length is ideal for crossovers networks, custom chokes and inductors. Tinned copper wire ideal for PCB links, breadboards etc.

These premium wires are stranded 26AWG wires with female terminals on both ends. Together with Pololu's 0.1" crimp connector housings, these wires can be used to make custom cables with 0.1" (2.54mm) connectors. These 24" (60 cm) wires have white insulation and ship in packs of 5.

These 24" (60 cm) premium jumper wires are made from 26 AWG stranded copper ribbon cable with female connectors on both ends that work with 0.1" (2.54 mm)...

These premium wires are stranded 26AWG wires with male terminals on both ends. Together with Pololu's 0.1" crimp connector housings, these wires can be used to make custom cables with 0.1" (2.54mm) connectors. These 24" (60 cm) wires have red insulation and ship in packs of 5.

This is your simple three conductor sensor cable with electrode pad leads. These cables are 24" long and feature a 3.5mm audio jack connector on one end with snap style receptacles for biomedical sensor pads. Each cable comes in a red/blue/black set.

These premium wires are stranded 26AWG wires with female terminals on both ends. Together with Pololu's 0.1" crimp connector housings, these wires can be used to make custom cables with 0.1" (2.54mm) connectors. These 24" (60 cm) wires have black insulation and ship in packs of 5.

Battery holder for two C cells.

This 24-inch (600-mm), twisted cable can be used to extend the leads of many common RC hobby servos. It has 22-AWG wires, and both the male and female cable ends are compatible with both JR- and Futaba-style connectors, allowing it to work in either system or as an adapter between systems. The cable’s conductors each consist of 60 strands, making it much more flexible than standard servo cables, and the wires are twisted to reduce electromagnetic interference (EMI).

These premium wires are stranded 26AWG wires with female terminals on both ends. Together with Pololu's 0.1" crimp connector housings, these wires can be used to make custom cables with 0.1" (2.54mm) connectors. These 24" (60 cm) wires have gray insulation and ship in packs of 5.

These premium wires are stranded 26AWG wires with male terminals on both ends. Together with Pololu's 0.1" crimp connector housings, these wires can be used to make custom cables with 0.1" (2.54mm) connectors. These 24" (60 cm) wires have black insulation and ship in packs of 5.

These 24" (60 cm) premium jumper wires are made from 26 AWG stranded copper ribbon cable with female crimp pins on one end and male crimp pins on the...

Once in a while we find products that have center negative DC power jacks and they really make us mad because who keeps around both positive and negative...

Battery holder for six AA batteries.

This 24-inch (600-mm), flat cable has 22-AWG wires and female “JR”-style connectors on both ends, the same kind of connector commonly found on RC hobby servos. It can be used to make connections between devices with 0.1" 3-pin male headers, such as between RC servo controllers or RC receivers and motor controllers with an RC interface. It can also be a convenient way to connect various 3-pin sensors to a robot controller.

Battery holder for four AA batteries.

Battery holder for three AA cells.

This 6-conductor, 75 cm (30") cable has 24 AWG wires and a 6-pin female JST PH-type connector (2mm pitch) on one end. The other ends of the wires are...

Enclosed battery holder for four AA cells. This holder features a lid that slides over the batteries and snaps into place to fully enclose them. It also features a switch that lets you open and close the electrical connection between the batteries and the holder’s leads.

Battery holder for six AA cells arranged as two back-to-back three-cell holders.

Battery holder for two AA cells.

Battery holder for eight AA cells arranged as two back-to-back four-cell holders.

Enclosed battery holder for three AA cells. This holder features a lid that slides over the batteries and snaps into place to fully enclose them. It also features a switch that lets you open and close the electrical connection between the batteries and the holder’s leads.

Battery holder for three AAA cells.

Battery holder for three C cells.

Battery holder for 4 AAA cells.

The SparkFun Qwiic Scale is a small breakout board for the NAU7802 that allows you to easily read load cells to accurately measure the weight of an object. By connecting...

Our favorite food when hacking on code or electronics is a hot bowl of noodles - and around NYC these are often called 'noods'! What we've got...

Attaching NeoPixel strips to your costume can be a struggle as the flexible PCBs can crack when bent too much. So how to add little beating hearts of...

These premium wires are stranded 26 AWG wires with female terminals on both ends. Together with our 0.1" crimp connector housings, these wires can be used...

This is a PCB engineering ruler used daily by DFRobot electronic engineers, the short PCB ruler is only the size of the palm of your hand, making it more delicate...

These premium wires are stranded 26 AWG wires with female terminals on one end and male terminals on the other end. Together with our 0.1" crimp connector...

These are the smallest NeoPixel breakouts around! Tiny, bright RGB+White pixels to your project. These little PCBs are only 9.1mm x 9.1mm and have two sets of three pads on the back for soldering wires. These ultra-bright LEDs have a constant-current driver cooked right into the LED package! The pixels are chainable - so you only need 1 pin/wire to control as many LEDs as you like.

Here comes a Mini Portable Multi-function USB Color Screen Tester! It supports fast charging decoy, protocol conversion, real-time curve displaying, and trigger...

These premium wires are stranded 26 AWG wires with female terminals on one end and male terminals on the other end. Together with our 0.1" crimp connector...

The SparkFun NEO-M9N GPS Breakout is a high quality GPS board with equally impressive configuration options including SMA. The NEO-M9N module is a 92-channel u-blox...

These premium wires are stranded 26 AWG wires with female terminals on both ends. Together with our 0.1" crimp connector housings, these wires can be used...

5.79inch E-Paper Module (B), e-ink display, 792x272, Red/Black/White, SPI Interface...

Is this not the cutest little display for the Raspberry Pi? It features a 2.8" display with 320x240 16-bit color pixels and a capacitive touch overlay. That's right...

Is this not the cutest little display for the Raspberry Pi? It features a 2.8" display with 320x240 16-bit color pixels and a resistive touch overlay. The plate...

This 12-inch (300-mm), flat cable has 22-AWG wires and female “JR”-style connectors on both ends, the same kind of connector commonly found on RC hobby servos. It can be used to make connections between devices with 0.1" 3-pin male headers, such as between RC servo controllers or RC receivers and motor controllers with an RC interface. It can also be a convenient way to connect various 3-pin sensors to a robot controller. The cable’s conductors each consist of 60 strands, making it more flexible than standard servo cables.