Bionic Robot Hand (Left)

SKU: ROB0142 Brand: DFRobot

Retired Product

Search for an alternative

This product has been retired. It is no longer available, but this page has been kept for reference.

Introduction

The bionic robot hand is made up of acrylic material. It consists of 5 micro metal servos, joints and one hand base. The special mechanical structure makes every finger can be controlled separately, all can move in certain range. And every finger has spring damping structure, it will protect the robotic hand from the mechanical stress effectively. With 24 channel Veyron servo driver, all actions can be controlled via PC software, supporting online debug and wireless control.

The bionic robot hand can be controlled by Arduino and other Servo controllers. It can grab 500g object, and it is the best option for DIY robot hand demonstration.
The servo can be connected directly to the Arduino IO expansion shield or the Romeo robot microcontroller, and Arduino servo library makes it easier to use.

Note: Please be careful with the servo control, even if there is damping structures on each finger, the non-standard operation will still damage the servos.

FEATURES

Bionic robot hand, every finger can be controlled separately.

Special spring damping structure, effective protection

Acrylic material, the whole kit is less than 900g

Free from manually assemble, assembled before delivery

Compatible with Arduino and the other Microcontroller

Recommend 5V@2A power supply.

Specification

Operating Voltage: 4.8-6V

Control Signal: 1.0ms~2.0ms (45~135°)

Operating Current: 2A

Payload: 500g

Servo Torque: 2.4kg*cm (4.8v) 2.8kg*cm (6v)

Servo Speed: 0.11 "/ 60 ° (4.8v) 0.09" / 60 ° (6.0 V)

Operating Temperature: 0 ~ 55 ℃

Cable: Brown <-> GND
Red <-> VCC
Orange<->Signal

Servo Dimension: 23 * 12.2 * 29mm /0.91*0.48*1.14 inches

Hand Dimension: 330 mm / 12.99 inches (Height)

Servo net weight: 14g

Weight: 916g (Whole kit)

Documents

Product WIKI

Parts List

Bionic Robot Hand (Left) x1

This product is listed in:

Retired

Product Comments

Start the conversation

Exact shipping can be calculated on the view cart page (no login required).

Products that weigh more than 0.5 KG may cost more than what's shown (for example, test equipment, machines, >500mL liquids, etc).

We deliver Australia-wide with these options (depends on the final destination - you can get a quote on the view cart page):

$3+ for Stamped Mail (typically 10+ business days, not tracked, only available on selected small items)
$7+ for Standard Post (typically 6+ business days, tracked)
$11+ for Express Post (typically 2+ business days, tracked)
Pickup - Free! Only available to customers who live in the Newcastle region (must order online and only pickup after we email to notify you the order is ready). Orders placed after 2PM may not be ready until the following business day.

Non-metro addresses in WA, NT, SA & TAS can take 2+ days in addition to the above information.

Some batteries (such as LiPo) can't be shipped by Air. During checkout, Express Post and International Methods will not be an option if you have that type of battery in your shopping cart.

International Orders - the following rates are for New Zealand and will vary for other countries:

$12+ for Pack and Track (3+ days, tracked)
$16+ for Express International (2-5 days, tracked)

If you order lots of gear, the postage amount will increase based on the weight of your order.

Our physical address (here's a PDF which includes other key business details):

Unit 18, 132 Garden Grove Parade
Adamstown
NSW, 2289
Australia

Take a look at our customer service page if you have other questions such as "do we do purchase orders" (yes!) or "are prices GST inclusive" (yes they are!). We're here to help - get in touch with us to talk shop.

Have a product question? We're here to help!

Write Your Own Review