Arduino Lucky Shield

SKU: A000125 Brand: Arduino

Retired Product

Replaced by: Arduino

This product has been replaced by: Arduino
This product is no longer available. This page is only for reference.

Arduino Lucky Shield is an easy way to use your Arduino boards, that grants you access to barometric pressure, relative altitude, luminosity, temperature, motion and presence. You can also turn it into a simple controller and OLED (organic light-emitting diode) display system. It is the perfect shield for IoT.

Technical Specifications

Relays	OMRON G6RL-1 (5V DC)
PIR Sensor	MOSDESIGN M7616
Ambient Light Sensor	EVERLIGHT ALS-PT19-315C/L177/TR8 Peak sensitivity wavelength 630nm , Operating temperature -40 ~ +85°C
Humidity Sensor	BOSCH SENSORTEC BME 280
Temperature Sensor	BOSCH SENSORTEC BME 280 Operating temperature -40 ~ +85°C
Pressure sensor	BOSCH SENSORTEC BME 280 Operating pressure range 300 ~ 1100 hPa
3-axis magnetometer	NXP MAG3110 E-compass, Full-scale range ±1000 T, Output data rates (ODR) up to 80 Hz
3 Axis accelerometer	NXP MMA8491Q G-sensor, Ultra-fast data output time, ~700 μs ±8g full-scale range 3-axis, 45° tilt outputs
Buzzer	PUI AUDIO SMT-0927-S-6-R
Joystick	5-directional tact switch

OSH: Schematics The Arduino Lucky Shield is open-source hardware! You can build your own board using the following files:

Power

The shield doesn't need external power. It will be provided by the Arduino base board, through the 5V and 3.3V pins of the base. The shield is compatible with all Arduino board 5V and 3.3V standards.

Physical Characteristics

The maximum length and width of the Lucky Shield PCB are 2.7 by 2.1 inches,respectively (68.6 x 53.4 mm). Four screw holes allow the Shield to be attached to a surface or case. Note that the distance between digital pins 7 and 8 is 160 mil (0.16"), not an even multiple of the 100 mil spacing of the other pins

This product is listed in:

Retired

Product Comments

Start the conversation

Exact shipping can be calculated on the view cart page (no login required).

Products that weigh more than 0.5 KG may cost more than what's shown (for example, test equipment, machines, >500mL liquids, etc).

We deliver Australia-wide with these options (depends on the final destination - you can get a quote on the view cart page):

$3+ for Stamped Mail (typically 10+ business days, not tracked, only available on selected small items)
$7+ for Standard Post (typically 6+ business days, tracked)
$11+ for Express Post (typically 2+ business days, tracked)
Pickup - Free! Only available to customers who live in the Newcastle region (must order online and only pickup after we email to notify you the order is ready). Orders placed after 2PM may not be ready until the following business day.

Non-metro addresses in WA, NT, SA & TAS can take 2+ days in addition to the above information.

Some batteries (such as LiPo) can't be shipped by Air. During checkout, Express Post and International Methods will not be an option if you have that type of battery in your shopping cart.

International Orders - the following rates are for New Zealand and will vary for other countries:

$12+ for Pack and Track (3+ days, tracked)
$16+ for Express International (2-5 days, tracked)

If you order lots of gear, the postage amount will increase based on the weight of your order.

Our physical address (here's a PDF which includes other key business details):

40 Aruma Place
Cardiff
NSW, 2285
Australia

Take a look at our customer service page if you have other questions such as "do we do purchase orders" (yes!) or "are prices GST inclusive" (yes they are!). We're here to help - get in touch with us to talk shop.

Have a product question? We're here to help!

Write Your Own Review