TinyS3 ESP32-S3 Dev board

SKU: CE08577 Brand: Unexpected Maker
Introducing the TinyS3 - The Tiny Mighty ESP32-S3 development board in the TinyPICO format! Ships with a set of male headers and JST connector that you...
$33.03 AUD, inc GST
$30.03 AUD, exc GST

In stock, ships same business day if ordered before 2PM
Delivered by Mon, 25th of Nov

Quantity Discounts:

  • 10-25 $28.83 (exc GST)
  • 25+ $27.93 (exc GST)
- +

3 from local stock, 1 supplier stock; your order will dispatch between Dec 1 to Dec 10. And yes, stock levels and lead times are accurate!

Shipping:

  • $7+ Standard (5+ days*, tracked)
  • $11+ Express (2+ days*, tracked)
  • FREE Pickup (Newcastle only - must order online*)

Shipping costs may increase for heavy products or large orders.

Exact shipping can be calculated on the view cart page.

*Conditions apply, see shipping tab below.

The ProS3 ships with the latest version of CircuitPython with ESP32-S3 support. It also ships with the UF2 bootloader, so you can easily update your ProS3 with the latest CircuitPython firmware, whenever you desire. Just plug your ProS3 into your computer and it will appear in your filesystem as a USB flash drive! Just copy your code over, or edit your code directly on the drive. Coding a microcontroller has never been easier!

As newer versions of CircuitPython are released, you are able to update as you require from circuitpython.org If you need to grab the shipping CircuitPython code that comes with the ProS3, you can grab the latest here

You can also use Arduino 2.0.3 or later, which has added S3 support. There is also ESP-IDF and an early MicroPython port available as well. Visit the ProS3 product page for more details.

Features & Specifications

  • Dual 32bit Xtensa LX7 cores @ up to 240Mhz
  • RISC-V Ultra Low Power Co-processor
  • 2.4GHz Wifi - 802.11b/g/n
  • Bluetooth 5, BLE + Mesh
  • 16MB QSPI Flash
  • 8MB of extra QSPI PSRAM
  • 2x 700mA 3.3V LDO Regulators
  • LDO2 is user controlled & auto-shuts down in deep-sleep
  • Low power RGB LED
  • Ultra low deep sleep current
  • USB-C Connector with back-feed protection
  • USB ESD protection
  • Native USB + USB Serial JTAG
  • LiPo Battery Charging + PicoBlade connector
  • VBAT and 5V Sense Pins
  • 3D High Gain Antenna
  • STEMMA connector powered by LDO1
  • 27x GPIO including castellated headers
  • JTAG pins on the header

Product Comments

Exact shipping can be calculated on the view cart page (no login required).

Products that weigh more than 0.5 KG may cost more than what's shown (for example, test equipment, machines, >500mL liquids, etc).

We deliver Australia-wide with these options (depends on the final destination - you can get a quote on the view cart page):

  • $3+ for Stamped Mail (typically 10+ business days, not tracked, only available on selected small items)
  • $7+ for Standard Post (typically 6+ business days, tracked)
  • $11+ for Express Post (typically 2+ business days, tracked)
  • Pickup - Free! Only available to customers who live in the Newcastle region (must order online and only pickup after we email to notify you the order is ready). Orders placed after 2PM may not be ready until the following business day.

Non-metro addresses in WA, NT, SA & TAS can take 2+ days in addition to the above information.

Some batteries (such as LiPo) can't be shipped by Air. During checkout, Express Post and International Methods will not be an option if you have that type of battery in your shopping cart.

International Orders - the following rates are for New Zealand and will vary for other countries:

  • $12+ for Pack and Track (3+ days, tracked)
  • $16+ for Express International (2-5 days, tracked)

If you order lots of gear, the postage amount will increase based on the weight of your order.

Our physical address (here's a PDF which includes other key business details):

Unit 18, 132 Garden Grove Parade
Adamstown
NSW, 2289
Australia

Take a look at our customer service page if you have other questions such as "do we do purchase orders" (yes!) or "are prices GST inclusive" (yes they are!). We're here to help - get in touch with us to talk shop.

Have a product question? We're here to help!

Write Your Own Review

Videos

View All

Guides

WiFi GlowBit Matrix Control with WLED and ESP32/ESP8266 Dev Boards – Make Pixel Art with No Code!

Nothing beats bright shiny colourful lights and adding an extra dimension only makes them better.&n...
Nothing beats bright shiny colourful lights and adding an extra dimension only makes them better.&n...

Understanding ESP32 Naming Conventions

Espressif is a constantly ground-breaking company that produces lots of really cool development mod...
Espressif is a constantly ground-breaking company that produces lots of really cool development mod...

The Maker Revolution

The Maker Revolution celebrates the creation of new devices and the modification of existing ones - ...
The Maker Revolution celebrates the creation of new devices and the modification of existing ones - ...

Projects

IoT Pet Feeder

The objective of this project was to create an Internet of Things (IoT) device that could give pet a...
The objective of this project was to create an Internet of Things (IoT) device that could give pet a...

IoT Chicken Shed (Arduino, Wifi)

If you have chickens and find you're not always available to close the gate at night or check the wa...
If you have chickens and find you're not always available to close the gate at night or check the wa...

AWS Lambda with Temperature data and the ESP32

In this project, I'm using an esp32 board combined with a thermistor, plus an Amazon Web Services La...
In this project, I'm using an esp32 board combined with a thermistor, plus an Amazon Web Services La...
Feedback

Please continue if you would like to leave feedback for any of these topics:

  • Website features/issues
  • Content errors/improvements
  • Missing products/categories
  • Product assignments to categories
  • Search results relevance

For all other inquiries (orders status, stock levels, etc), please contact our support team for quick assistance.

Note: click continue and a draft email will be opened to edit. If you don't have an email client on your device, then send a message via the chat icon on the bottom left of our website.

Makers love reviews as much as you do, please follow this link to review the products you have purchased.