Sure Electronics Programmer (Atmel STK500-Compatible)

SKU: 017-RDB-DA11112 Brand: Sure Electronics

Retired Product

Search for an alternative
This product has been retired. It is no longer available, but this page has been kept for reference.

This is a low cost programmer developed by Sure Electronics is compatible with the Atmel® STK500® hardware design and software. This AVR® programmer requires AVR Studio® 4.14 Build 589 (download link available below).

Features:

  • Size: 56.6(L) X 74.6 (W) X 28 (H)  ± 0.2mm
  • This USB programmer supports a wide range of ATMEL® AVR® microcontrollers.
  •  It communicates with PC vai USB port, and it works with most of PC & notebook computers.
  •  It works with ATMEL® AVR Studio® 4.13.
Devices Supported List
AT90sXXXX
ATtinyXX
ATmegaXXXX
 
AT90s2313
ATtiny11
ATmega103
ATmega325P
AT90s2323
ATtiny12
ATmega128
ATmega3250
AT90s2343
ATtiny13
ATmega1280
ATmega3250P
AT90s4414
ATtiny15
ATmega1281
ATmega329
AT90s4433
ATtiny22
ATmega16
ATmega329P
AT90s4434
ATtiny2313
ATmega161
ATmega3290
AT90s8515
ATtiny24
ATmega162
ATmega3290P
AT90s8535
ATtiny25
ATmega163
ATmega406
/
ATtiny26
ATmega164P
ATmega48
/
ATtiny261
ATmega165
ATmega48P
/
ATtiny28
ATmega165P
ATmega64
/
ATtiny44
ATmega168
ATmega640
/
ATtiny45
ATmega169
ATmega644
/
ATtiny461
ATmega169P
ATmega644P
/
ATtiny84
ATmega2560
ATmega6450
/
ATtiny85
ATmega2561
/
/
ATtiny861
ATmega32
/
/
/
ATmega323
/
/
/
ATmega324P
/
/
/
ATmega325
/
/ / / /


 For programming, the four lines required from the AVR chip to the ISP adaptor (dongle) are:

  • MOSI (Master out, slave in): Data being transmitted to the AVR® being programmed is sent on this pin.
  • MISO (Master in, slave out): Data received from the AVR® being programmed is sent on this pin.
  • SCK (shift clock): Serial clock generated by the programmer from the PC.
  • RST (Reset ) : Reset(low pulse) generated by the programmer.
  • NC: A black space.
  • VTG: While release one port it will result in VTG on the appropriate port header connect. Valid target  voltage range is 5 V.
  • GND: Signal ground and power ground.

Packaging Contents:

  • Sure Electronics USB Programmer (STK500 Compatible) x 1
  •  USB Cable x 1

Downloads:


"Atmel", "AVR", "AVR Studio", "tinyAVR" and "XMEGA" are registered trademarks of Atmel Corporation.

This product is listed in:

Retired

Product Comments

Exact shipping can be calculated on the view cart page (no login required).

Products that weigh more than 0.5 KG may cost more than what's shown (for example, test equipment, machines, >500mL liquids, etc).

We deliver Australia-wide with these options (depends on the final destination - you can get a quote on the view cart page):

  • $3+ for Stamped Mail (typically 10+ business days, not tracked, only available on selected small items)
  • $6+ for Standard Post (typically 6+ business days, tracked)
  • $10+ for Express Post (typically 2+ business days, tracked)
  • Pickup - Free! Only available to customers who live in the Newcastle region (must order online and only pickup after we email to notify you the order is ready). Orders placed after 2PM may not be ready until the following business day.

Non-metro addresses in WA, NT, SA & TAS can take 2+ days in addition to the above information.

Some batteries (such as LiPo) can't be shipped by Air. During checkout, Express Post and International Methods will not be an option if you have that type of battery in your shopping cart.

International Orders - the following rates are for New Zealand and will vary for other countries:

  • $11+ for Pack and Track (3+ days, tracked)
  • $16+ for Express International (2-5 days, tracked)

If you order lots of gear, the postage amount will increase based on the weight of your order.

Our physical address (here's a PDF which includes other key business details):

Unit 18, 132 Garden Grove Parade
Adamstown
NSW, 2289
Australia

Take a look at our customer service page if you have other questions such as "do we do purchase orders" (yes!) or "are prices GST inclusive" (yes they are!). We're here to help - get in touch with us to talk shop.

Have a product question? We're here to help!

Write Your Own Review

Guides

The Maker Revolution

The Maker Revolution celebrates the creation of new devices and the modification of existing ones - ...
The Maker Revolution celebrates the creation of new devices and the modification of existing ones - ...

Projects

Accurate IoT Clock With ESP8266

Being punctual is important. Hence accurate time is required. Clocks tend to miss out when it comes...
Being punctual is important. Hence accurate time is required. Clocks tend to miss out when it comes...

Days2Bin: Pico Powered Bin Reminder

Our recycle bin is collected fortnightly, but I can never remember which week, and the printed cale...
Our recycle bin is collected fortnightly, but I can never remember which week, and the printed cale...

Raspberry Pi Video Looper Display Installation | Overshare Video Festival

IntroductionA suspended ceiling display of forty repurposed screens and displays, each screening cr...
IntroductionA suspended ceiling display of forty repurposed screens and displays, each screening cr...
Feedback

Please continue if you would like to leave feedback for any of these topics:

  • Website features/issues
  • Content errors/improvements
  • Missing products/categories
  • Product assignments to categories
  • Search results relevance

For all other inquiries (orders status, stock levels, etc), please contact our support team for quick assistance.

Note: click continue and a draft email will be opened to edit. If you don't have an email client on your device, then send a message via the chat icon on the bottom left of our website.

Makers love reviews as much as you do, please follow this link to review the products you have purchased.