empowering creative people

RoboClaw 2x60A Motor Controller with USB (V4)

SKU: POLOLU-1499

$401.95 AUD, inc GST
$365.41 AUD, exc GST
RoboClaw 2x60A Motor Controller with USB (V4)
401.95 AUD

SKU: POLOLU-1499

$401.95 AUD, inc GST
$365.41 AUD, exc GST
0 units ship today
Contact us if you need this product urgently

The USB versions of the RoboClaw 2x15A and 2x30A add a USB interface but are otherwise identical to the 2x15A (V4) and 2x30A (V4) without USB that they replace.

Overview

The RoboClaw from Orion Robotics (formerly Basic Micro) is an efficient, versatile, dual-channel synchronous regenerative motor controller. It can supply two brushed DC motors with 5 A, 15 A, 30 A, or 60 A continuous (depending on the model) at voltages from 6 to 34 V, and it allows for peak currents up to twice the maximum continuous rating.

The RoboClaw features dual quadrature decoding capability. A built-in PID routine can be used for closed-loop speed control, maintaining motor speeds even if the load varies, or the encoder counts and speeds can be read directly from the RoboClaw for use with an external control system. Analog feedback is also supported for closed-loop position control.

This RoboClaw features a USB interface that acts as a virtual serial (COM) port, allowing it to be controlled directly from a computer. Several other interface modes are supported by the RoboClaw as well: it can be controlled via TTL serial for use with an embedded system, RC hobby servo pulses for use as an RC-controlled electronic speed control (ESC), or analog voltages for use with potentiometers or analog joysticks.

Key Features

  • Simple bidirectional control of two brushed DC motors
  • 6 V to 34 V operating supply range
  • 5 A to 60 A maximum continuous current output, depending on controller model
  • Automatic current limiting reduces duty cycle when motor current is between 1× and 2× the controller’s rated current
  • Four communication or control options:
    1. USB serial interface (virtual COM port)
    2. Logic-level (TTL) serial interface for direct connection to microcontrollers or other embedded controllers
    3. Hobby radio control (RC) pulse width interface for direct connection to an RC receiver or RC servo controller
    4. 0 V to 2 V (5 V tolerant) analog voltage interface for direct connection to potentiometers and analog joysticks
  • Dual feedback inputs for PID closed-loop control:
    • Speed control with quadrature encoders, up to 19.6 million encoder pulses per second
    • Position control with analog encoders or potentiometers
    • (Open-loop control with no feedback also available)
  • Screw terminals for quick connect/disconnect
  • Configurable via pushbutton interface
  • Regenerative braking
  • Tolerates high-speed direction changes
  • Jumper-selectable 5 V BEC
  • Battery monitoring and under-voltage cutoff protects batteries from over-discharging

RoboClaw Comparison Table


2x5A

2x15A

2x30A

2x60A
Motor channels: 2
Operating voltage: 6 V to 34 V
Continuous output current: 5 A 15 A 30 A 60 A
Peak output current: 10 A 30 A 60 A 120 A
5V BEC(1) max current: 150 mA 3 A
USB interface:   Yes Yes Yes
Width: 1.7″ (4.2 cm) 2.1″ (5.2 cm) 3.4″ (8.6 cm)
Length: 1.9″ (4.8 cm) 2.9″ (7.4 cm) 3.9″ (10 cm)
Weight: 17 g 59 g 63 g 205 g

1 Battery Eliminator Circuit

Sample Code

Orion Robotics has written an Arduino library for the RoboClaw that makes it easy to interface these motor controllers with an Arduino. The library comes with several example sketches that demonstrate different methods of controlling the RoboClaw.

Documentation and Resources:

Product Comments

We deliver Australia-wide with these options:

  • $3 for Small Items (4-6 days, not tracked, only available on selected small items)
  • $6.95 for Standard Post (2-4 days, tracked)
  • $8.32 for Express Post (1-2 days, tracked)
  • Pickup - Free! Only available to customers who live in the Newcastle region (only after we email you to notify your order is ready)

International Orders - the following rates are for New Zealand and will vary for other countries:

  • $11.49 for Pack and Track (3+ days, tracked)
  • $16.50 for Express International (2-5 days, tracked)

If you order lots of gear, the postage amount might increment based on the weight of your order.

Our physical address:

Unit 18, 132 Garden Grove Parade
Adamstown
NSW, 2289
Australia

Please checkout our customer service page if you have other frequently asked questions such as "do we do purchase orders" (yes!) or "are prices GST inclusive" (yes they are!). We're here to help - get in touch with us to talk shop.