Retroflag MEGAPi Case for Raspberry Pi 3 Model B+

This is a retro-inspired case for the Raspberry Pi 3 B+ will instantly transport you back to the classic gaming consoles of the early 90s. If you were on the other side of the gaming system fence, take a look at NESPi and SUPERPi cases. All of the RetroFlag cases come with working power and reset buttons(require scripts) as well as storage for extra SD cards. 

* Safe shutdown scripts: https://github.com/RetroFlag/retroflag-picase

LAN & USB cover

Behind the small sliding door at the back of the case, you can access the LAN port and 2 USB ports and hide them when they are not in use.

Improved HDMI and Audio ports

The MEGAPi and SUPERPi have been designed to allow the HDMI and Audio Port to plug directly into the Pi. This upgrade means that there an improvement to the quality of the video and audio output. 

Micro SD Storage.

The MEGAPi has a large storage area for spare SD Cards built into the top of the case, you can also open a compartment at the back of the case that allows for the SD card to be swapped easily.

To create a RetroPie setup, at a minimum, you'll need a Raspberry Pi 3 Model B+, a Power Supply, a controller, and a RetroPie micro SD card.

Compatibility

• Raspberry Pi 3 Model B+
• Raspberry Pi 3 Model B
• Raspberry Pi 2 Model B

Connectivity and Cooling

Connecting your Pi up inside the case is easy. Just plug the Ethernet, USB and GPIO pins in, and you're ready to go. There's also room to mount a 30mmx30mmx7mm fan inside for additional cooling plus plenty of room for mounting a heatsink. If you'd like to learn more about cooling your Pi and whether you need a heatsink or a fan, take a look at our tutorial for Cooling your Raspberry Pi.

Features and Specs

• Safe Shutdown and Safe Reset
• 4x USB ports (2 open and 2 in the compartment at the back)
• Ethernet port
• HDMI, 3.5mm, and micro USB (power) access
• Power and Reset buttons with GPIO connector
• 30mm fan mount with bottom panel air vents
• Spare micro SD card storage
• Product Dimensions: 140mmx116mmx38mm

Package Includes

• MEGAPi Case
• Instruction Manual
• Screwdriver

Customization

Retroflag tailored this enclosure to fit in your Raspberry Pi perfectly so that once assembled it will be almost exactly as you remembered the original console though maybe with a little more power.