Home
Shop
Retired
PSCN2000 UPS 2000VA Pure Sine Wave

Skip to the beginning of the images gallery

PSCN2000 UPS 2000VA Pure Sine Wave

SKU: AD0885

Retired Product

Search for an alternative

This product has been retired. It is no longer available, but this page has been kept for reference.

The Powershield Commander 2000VA Uninterruptible Power Supply (UPS) provides mains like pure sine wave for powering devices with less heat generation and high efficiency. Besides providing Automatic Voltage. Regulation (AVR) it also provides for a Pure Sine Wave output while in backup mode. Perfect for servers, motor driven equipment and sensitive equipment requiring a perfect sinewave to operate correctly in both regular and battery back up modes. Fitted with IEC outlets and RJ11 phone line surge protection. The front panel features an LCD providing real-time battery management, showing battery and equipment load levels. It also features audible alarm and a host of safety features including discharge, overcharge, short circuit, overheat and overload protection. Includes management software to suit most operating systems.

Pure Sine Wave Output

The Commander Tower provides a sine wave output, even when the UPS is running off of its batteries.
The pure sine wave offers an economical solution to back up gates, cameras, computers, motors, telephone systems and other sensitive equipment.

Output Power Factor 0.9

With an output power factor of 0.9, the Commander Tower is a high-density UPS that will provide higher performance and efficiency to critical applications.

Programmable Power Management

Features a combination of both Australian and IEC outlets.
With programmable power management outlets, users can easily and independently control load segments. During power failure this feature enables users to extend battery time to mission-critical devices by shutting down noncritical devices in a timely manner.

Ultra Modern, Informative LCD

Designed by Power Shield engineers this ultra-modern LCD features extra large numeral displays and an informative
mimic allowing users to view up to date information at a glance.

ECO Mode

With built-in advanced ECO mode, this UPS will achieve an efficiency of up to 98% during normal mains operation. Using this option will allow for reduced ongoing running costs.

Smart AVR with Buck and Boost

With a built-in voltage regulator, the Commander Tower will maintain regulated nominal output without using battery power during brownouts and overvoltages.

Emergency Power Off Function (EPO)

This feature can turn off and isolate the UPS in the event of fires or other emergencies.

Multiple Communication Available

USB, RS-232 supports PowerShield NetGuard® software for Windows, Linux and Mac
Intelligent slot for either PSSNMPV4, PSAS400, PSMbus

Features

Pure Sine Wave Output
Output Power Factor 0.9
Free, programmable Power Management
Ultra Modern, Informative LCD – Shows Battery Time Remaining
ECO Mode
Smart AVR
Emergency Power Off Function
Multiple Communication Available with faster SNMP Card

Specifications

Model Number: PSCM2000
Capacity (PF = 0.9): 2000 VA / 1800 W

Input

Nominal Voltage: 240Vac
Acceptable Voltage Range: 162-290 VAC
Frequency Range: 50/60Hz ± 5Hz (auto sensing)

Output

Voltage Regulation (AC Mode): 240Vac (Selectable 208/220/230Vac) ± 10% AVR
Voltage Regulation (Batt. Mode): ± 1.5% (before battery alarm)
Frequency Range (Batt. Mode): 50 Hz or 60 Hz ± 1 Hz
Current Crest Ratio: 3:1
Total Harmonic Distortion: 2% max @ 100% linear load, 5% max @ 100% non-linear load (before low battery alarm)
Transfer Time: 6ms (Typical), 10ms max.
Waveform (Batt. Mode): Pure Sine Wave

Efficiency

AC Mode: 98% (Advanced ECO design)
Battery Mode: 91%

Battery

Battery Type & Number: 12V / 9AH (x4)
Recharge Time: 4 hours recover to 90% capacity

Protection

Full Protection: Overload, thermal, short circuit, discharge and overcharge protection
Surge Protection: 1968 Joules / 39000 Amps

Environment

Operation Temperature: 0 - 40°C
Relative Humidity: 0-90% (RH non-condensing)
Noise Level: < 45dB

Communications and Management

Interface: USB and RS-232 as standard, Intelligent slot for PSSNMP, PSModbus or PSAS400 dry contact
Software: PowerShield NetGuard® software - supports Windows based operating system, Linux, Unix and Mac
LCD Display/Alarm: AC mode, Batt. Mode, Load Level, Input Voltage, Output Voltage, Overload, Fault,
Battery Replacement, Low Batt., Batt. Time Remaining
Audible Alarm: Battery Mode, Low Battery (Batt. Mode), Battery Replacement, Fault, Overload

Physical

Dimension D x W x H (mm): 455 x 145 x 220
Weight Nett/Gross (kg): 20.5 / 22.5

Compliance

Safety: EN62040-1 -1 2003, IEC 60950-1 -1
EMC: EN62040-2 2006
RoHS: Directive 2011/65/EU

Downloads

This product is listed in:

Retired

Product Comments

Start the conversation

Exact shipping can be calculated on the view cart page (no login required).

Products that weigh more than 0.5 KG may cost more than what's shown (for example, test equipment, machines, >500mL liquids, etc).

We deliver Australia-wide with these options (depends on the final destination - you can get a quote on the view cart page):

$3+ for Stamped Mail (typically 10+ business days, not tracked, only available on selected small items)
$6+ for Standard Post (typically 6+ business days, tracked)
$10+ for Express Post (typically 2+ business days, tracked)
Pickup - Free! Only available to customers who live in the Newcastle region (must order online and only pickup after we email to notify you the order is ready). Orders placed after 2PM may not be ready until the following business day.

Non-metro addresses in WA, NT, SA & TAS can take 2+ days in addition to the above information.

Some batteries (such as LiPo) can't be shipped by Air. During checkout, Express Post and International Methods will not be an option if you have that type of battery in your shopping cart.

International Orders - the following rates are for New Zealand and will vary for other countries:

$11+ for Pack and Track (3+ days, tracked)
$16+ for Express International (2-5 days, tracked)

If you order lots of gear, the postage amount will increase based on the weight of your order.

Our physical address (here's a PDF which includes other key business details):

Unit 18, 132 Garden Grove Parade
Adamstown
NSW, 2289
Australia

Take a look at our customer service page if you have other questions such as "do we do purchase orders" (yes!) or "are prices GST inclusive" (yes they are!). We're here to help - get in touch with us to talk shop.

Have a product question? We're here to help!

Write Your Own Review