ProS3 u.FL - ESP32-S3

Rating:
100% of 100
SKU: CE09723 Brand: Unexpected Maker
Introducing the ProS3 - The Ultimate Pro ESP32-S3 Development Board This version of the ProS3 ships with a u.FL connector instead of an on-board antenna,...
$40.22 AUD, inc GST
$36.56 AUD, exc GST

In stock, ships same business day if ordered before 2PM
Fastest delivery: Tomorrow* Disclaimer:
The shipping address needs to be in the AusPost next day network and eParcel Express is chosen during checkout. On rare occasions, orders may be delayed by up to one business day due to AusPost pickup timings or for order verifications.

Quantity Discounts:

  • 10-25 $35.10 (exc GST)
  • 25+ $34.00 (exc GST)
- +

3 from local stock, 1 supplier stock; your order will dispatch between Dec 1 to Dec 10. And yes, stock levels and lead times are accurate!

Shipping:

  • $7+ Standard (5+ days*, tracked)
  • $11+ Express (2+ days*, tracked)
  • FREE Pickup (Newcastle only - must order online*)

Shipping costs may increase for heavy products or large orders.

Exact shipping can be calculated on the view cart page.

*Conditions apply, see shipping tab below.

This is the ProS3 with a uFL connector instead of an on-board antenna.

Specifications

  • 32Bit Dual Core 240MHz
  • RISC-V ultra low power core
  • 2.4GHz WiFi - 802.11b/g/n
  • Bluetooth 5, BLE + Mesh
  • 16MB QSPI Flash
  • 8MB Extra QSPI PSRAM
  • USB-C Connector
  • USB ESD protection
  • Reverse USB back-feed protection
  • 2x 700mA 3.3V LDO Regulator
  • Ultra low deep sleep current
  • STEMMA connector
  • Low Power RGB LED
  • VBAT voltage check and 5V presence detection
  • LiPo Battery Charging
  • MicroBlade LiPo connector
  • Power (red), Charge (orange) LEDs
  • 27x GPIO broken out
  • Castellated Headers
  • JTAG Pins + USB Serial JTAG
  • 3D High Gain Antenna
  • Compatible with TinyPICO, TinyS2 & TinyS3

Ships with CircuitPython pre-installed!

The ProS3 ships with the latest version of CircuitPython that supports the ESP32-S3. It also ships with the UF2 bootloader, so you can easily update your ProS3 with the latest CircuitPython firmware, whenever you desire.

As newer versions of CircuitPython are released, you are able to update as you require from ciruitpython.org

Code any way you like!

There is also ESP-IDF and an early MicroPython port available as well. Visit the ProS3 product page for more details.

Features

 

Pinout

 

This product is listed in:

Development Boards>ESP32

Product Comments

Exact shipping can be calculated on the view cart page (no login required).

Products that weigh more than 0.5 KG may cost more than what's shown (for example, test equipment, machines, >500mL liquids, etc).

We deliver Australia-wide with these options (depends on the final destination - you can get a quote on the view cart page):

  • $3+ for Stamped Mail (typically 10+ business days, not tracked, only available on selected small items)
  • $7+ for Standard Post (typically 6+ business days, tracked)
  • $11+ for Express Post (typically 2+ business days, tracked)
  • Pickup - Free! Only available to customers who live in the Newcastle region (must order online and only pickup after we email to notify you the order is ready). Orders placed after 2PM may not be ready until the following business day.

Non-metro addresses in WA, NT, SA & TAS can take 2+ days in addition to the above information.

Some batteries (such as LiPo) can't be shipped by Air. During checkout, Express Post and International Methods will not be an option if you have that type of battery in your shopping cart.

International Orders - the following rates are for New Zealand and will vary for other countries:

  • $12+ for Pack and Track (3+ days, tracked)
  • $16+ for Express International (2-5 days, tracked)

If you order lots of gear, the postage amount will increase based on the weight of your order.

Our physical address (here's a PDF which includes other key business details):

Unit 18, 132 Garden Grove Parade
Adamstown
NSW, 2289
Australia

Take a look at our customer service page if you have other questions such as "do we do purchase orders" (yes!) or "are prices GST inclusive" (yes they are!). We're here to help - get in touch with us to talk shop.

Have a product question? We're here to help!

Write Your Own Review

Videos

View All

Guides

WiFi GlowBit Matrix Control with WLED and ESP32/ESP8266 Dev Boards – Make Pixel Art with No Code!

Nothing beats bright shiny colourful lights and adding an extra dimension only makes them better.&n...
Nothing beats bright shiny colourful lights and adding an extra dimension only makes them better.&n...

Understanding ESP32 Naming Conventions

Espressif is a constantly ground-breaking company that produces lots of really cool development mod...
Espressif is a constantly ground-breaking company that produces lots of really cool development mod...

The Maker Revolution

The Maker Revolution celebrates the creation of new devices and the modification of existing ones - ...
The Maker Revolution celebrates the creation of new devices and the modification of existing ones - ...

Projects

Interactive Exercise Bike - Pedal Powered Visuals

This project turns a cheap exercise mini bike into a virtual bike. I made this project with my brot...
This project turns a cheap exercise mini bike into a virtual bike. I made this project with my brot...

Accurate IoT Clock With ESP8266

Being punctual is important. Hence accurate time is required. Clocks tend to miss out when it comes...
Being punctual is important. Hence accurate time is required. Clocks tend to miss out when it comes...

Spirit In A Box Halloween Trick

IntroductionThis project was born from the desire to craft a captivating and spine-tingling magic t...
IntroductionThis project was born from the desire to craft a captivating and spine-tingling magic t...
Feedback

Please continue if you would like to leave feedback for any of these topics:

  • Website features/issues
  • Content errors/improvements
  • Missing products/categories
  • Product assignments to categories
  • Search results relevance

For all other inquiries (orders status, stock levels, etc), please contact our support team for quick assistance.

Note: click continue and a draft email will be opened to edit. If you don't have an email client on your device, then send a message via the chat icon on the bottom left of our website.

Makers love reviews as much as you do, please follow this link to review the products you have purchased.