Pi Supply Bit:Buggy Car (without micro:bit)

SKU: CE06646 Brand: Pi Supply

Retired Product

Replaced by: CE07188
This product has been replaced by: CE07188
This product is no longer available. This page is only for reference.

The Pi Supply Bit:Buggy Car is a small DIY smart car based around the BBC micro:bit.

Bit:Buggy has 3 extended GPIO ports - two for driving servos and one for any other stuff! The basic version of the Bit:Buggy can perform functions such as light following, remote control (additional micro:bit required) and others. by adding some different sensors and modules you can extend the functionality to enable things like light following, obstacle avoidance, drawing and more.

Pi Supply has developed guides around this kit to help you get up and running as quickly as possible. Visit pisupp.ly/bitbuggy to view more.

Kit Contains

  • 2 x Servo
  • 1 x Screwdriver
  • 2 x Wheel
  • 2 x Rivet
  • 1 x Universal Wheel
  • 1 x Back Shield
  • 1 x Bit:Buggy Board
  • 6 x Tapping Screw
  • 2 x Side Board
  • 1 x Binding Post
  • 5 x Screw
  • 1 x Rubber Band
  • 1 x Special Expansion Board
  • 1 x Base Board
  • 1 x Front Shield
  • 2 x Side Board

Note: This does not include a microbit, get one here!

This product is listed in:

Retired

Product Comments

Exact shipping can be calculated on the view cart page (no login required).

Products that weigh more than 0.5 KG may cost more than what's shown (for example, test equipment, machines, >500mL liquids, etc).

We deliver Australia-wide with these options (depends on the final destination - you can get a quote on the view cart page):

  • $3+ for Stamped Mail (typically 10+ business days, not tracked, only available on selected small items)
  • $7+ for Standard Post (typically 6+ business days, tracked)
  • $11+ for Express Post (typically 2+ business days, tracked)
  • Pickup - Free! Only available to customers who live in the Newcastle region (must order online and only pickup after we email to notify you the order is ready). Orders placed after 2PM may not be ready until the following business day.

Non-metro addresses in WA, NT, SA & TAS can take 2+ days in addition to the above information.

Some batteries (such as LiPo) can't be shipped by Air. During checkout, Express Post and International Methods will not be an option if you have that type of battery in your shopping cart.

International Orders - the following rates are for New Zealand and will vary for other countries:

  • $12+ for Pack and Track (3+ days, tracked)
  • $16+ for Express International (2-5 days, tracked)

If you order lots of gear, the postage amount will increase based on the weight of your order.

Our physical address (here's a PDF which includes other key business details):

Unit 18, 132 Garden Grove Parade
Adamstown
NSW, 2289
Australia

Take a look at our customer service page if you have other questions such as "do we do purchase orders" (yes!) or "are prices GST inclusive" (yes they are!). We're here to help - get in touch with us to talk shop.

Have a product question? We're here to help!

Write Your Own Review

Guides

The Maker Revolution

The Maker Revolution celebrates the creation of new devices and the modification of existing ones - ...
The Maker Revolution celebrates the creation of new devices and the modification of existing ones - ...

Projects

Spectral Animations with a DIY MSGEQ7 I2C Device

Frequency Reactive LEDs, i2c Protocol, Raspberry Pi, and Other Adventures.Here at Pix Incorpor...
Frequency Reactive LEDs, i2c Protocol, Raspberry Pi, and Other Adventures.Here at Pix Incorpor...

VisionSphere: Camera Motion Detection for Raspberry Pi

A simple camera motion detection system for Raspberry Pi. Definitely written with Aussie's in mind ...
A simple camera motion detection system for Raspberry Pi. Definitely written with Aussie's in mind ...

Arduino E-Paper Clock

This project started with a desire to have a modern digital clock that would use the natural light ...
This project started with a desire to have a modern digital clock that would use the natural light ...
Feedback

Please continue if you would like to leave feedback for any of these topics:

  • Website features/issues
  • Content errors/improvements
  • Missing products/categories
  • Product assignments to categories
  • Search results relevance

For all other inquiries (orders status, stock levels, etc), please contact our support team for quick assistance.

Note: click continue and a draft email will be opened to edit. If you don't have an email client on your device, then send a message via the chat icon on the bottom left of our website.

Makers love reviews as much as you do, please follow this link to review the products you have purchased.