We've got single, dual, flexy and dual flexxy extruders in our Lulzbot tool head arsenal. This particular tool head is designed to print MOAR material, and do it faster. It boasts a larger heater block, two print cooling fans and a 1.2mm nozzle that make layer heights > 0.3mm a breeze. The MOARstruder from Lulzbot was designed to make rapid prototyping reliable and fast and could be the perfect addition to your 3D printer!
Works out of the box with: LulzBot TAZ 6
Compatibility Alert!
TAZ 5 users with a tool head wiring harness with four (4) connectors will need an additional accessory: LulzBot TAZ 5 v2c Tool Head Harness. If you need this tool head, get in touch with us and we can get it in for you.
As this tool head has a 1.2mm nozzle alongside its extra long heater block; it can easily extrude much larger quantities of filaments. Don't let that claim be unsubstantiated, the improved 3D printing rate is measured as more than 100 grams per hour or -- a kilogram in 10 hours, and over 2.27 kilograms of the filament in a 24 hour period. You might need to pick up some more filaments for MOAR printing!
Lulzbot listens to the community too! The tool head mount and idler latch have both been redesigned to improve durability!
The LulzBot TAZ MOARstruder Tool Head can extrude more filament, faster than any other tool head and that makes it perfect for large, full-build volume prints.
Layer heights of 0.3 mm to 1.2 mm are a breeze, and look great with this tool head. Thicker extrusion widths and larger layer heights make your prints stronger too! Larger layer heights also mean that transparent filaments keep their transparency too, so INOVA-1800 and T-Glase filaments keep their shine.
LulzBot TAZ MOARstruder Tool Head v2 (Fully Assembled)
Wade's Accessible Extruder
LulzBot TAZ Extruder Mount
t-glase sample material for first print
M3 mounting screw, 20 mm (0.79 in) long, with washer
Required filament diameter: 3 mm
Hot end temperature range: 120°C - 300°C
Recommended Layer Heights: 0.3 mm (0.01 in) - 1.2 mm (0.05 in)
Nozzle diameter: 1.2 mm
Required power system: 24 V
Fans: Heat sink and dual print-cooling fans included
Avoid using the following filament when printing at larger scales, due to shrinking or warping when printed.
Included in your purchase is direct support from LulzBot professionals via [email protected] (available 24/7).
As official retailers, we are able to offer the same 90-day warranty (from the date of purchase) as LulzBot does for this product.
Exact shipping can be calculated on the view cart page (no login required).
Products that weigh more than 0.5 KG may cost more than what's shown (for example, test equipment, machines, >500mL liquids, etc).
We deliver Australia-wide with these options (depends on the final destination - you can get a quote on the view cart page):
Non-metro addresses in WA, NT, SA & TAS can take 2+ days in addition to the above information.
Some batteries (such as LiPo) can't be shipped by Air. During checkout, Express Post and International Methods will not be an option if you have that type of battery in your shopping cart.
International Orders - the following rates are for New Zealand and will vary for other countries:
If you order lots of gear, the postage amount will increase based on the weight of your order.
Our physical address (here's a PDF which includes other key business details):
Unit 18, 132 Garden Grove Parade
Adamstown
NSW, 2289
Australia
Take a look at our customer service page if you have other questions such as "do we do purchase orders" (yes!) or "are prices GST inclusive" (yes they are!). We're here to help - get in touch with us to talk shop.
Have a product question? We're here to help!
Makers love reviews as much as you do, please follow this link to review the products you have purchased.
Product Comments