0

empowering creative people

LulzBot in Australia

LulzBot are industry leaders for 3D Printers. We ship the most popular LulzBot 3D Printer products from right here in Australia. We've brought their range on board because we use and trust their products right here in the Core Electronics warehouse! The quality and features of these devices will future proof the needs of any enthusiast; especially the well-known LulzBot TAZ 3D Printer. Money well spent.

LulzBot is a registered trademark of Aleph Objects, Inc.

+
Hailing from Aleph Objects in Loveland, Colorado, the Lulzbot range of 3D printers are world renown for their quality, reliability and ease of use. The reason they're so popular? Apart from the gilded Lulzbot technical support (practically 24/7 World...
+
Dual Extruding with FDM 3D Printers is typically reserved for the most expert-level makers. By adding the ability to print with 2 materials, you open yourself up to a spread of conditions that simply didn't exist with a single extruder setup. But tho...
+
There is such a wide range of filaments available when you start 3D printing; it’s easy to get lost in all the abbreviations, acronyms, and temperatures. I’ve decided to bring together the most relevant information one should know when se...
  • LulzBot TAZ PEI Sheet CE04404 LulzBot Australia

    LulzBot TAZ PEI Sheet

    2 reviews 0 5 5
    SKU: CE04404
    Say goodbye to hairspray and painter's tape with this revolutionary new print surface. This PEI sheet is a direct replacement for the PEI (Polyetherimide) print surface on the LulzBot® TAZ line of 3D printers. Tested by the advanced members of the 3D Printing community, PEI has proven to be an easier and more reliable 3D printing surface than any other.
    $65.00 AUD, inc GST
    AUD, inc GST

    $65.00 AUD

  • Lulzbot TAZ 6 3D Printer CE04373 LulzBot Australia

    Lulzbot TAZ 6 3D Printer

    9 reviews 0 5 5
    SKU: CE04373
    The TAZ 6 has solidified its spot on the king-of-the-hill for large scale printers and is engineered to reliably print massive objects, quickly and accurately.
    $3,420.00 AUD, inc GST
    AUD, inc GST

    $3,420.00 AUD

  • LulzBot TAZ 6 Enclosure by Printed Solid CE04812 LulzBot Australia

    LulzBot TAZ 6 Enclosure by Printed Solid

    1 reviews 0 5 5
    SKU: CE04812
    Minimize warping caused by drafts or cold 3D printing environments with the LulzBot Taz 6 Enclosure by Printed Solid. This enclosure was designed for the Lulzbot Taz 6 and helps keep curious hands and paws away from your 3D printer.
    $400.00 AUD, inc GST
    AUD, inc GST

    $400.00 AUD

  • LulzBot TAZ Dual Extruder v3 Tool Head CE05063 LulzBot Australia

    LulzBot TAZ Dual Extruder v3 Tool Head

    SKU: CE05063
    Take your designs to the next level with the all-new LulzBot TAZ Dual Extruder v3 Tool Head. This tool head was engineered to utilize dedicated support material, including soluble filament, like PVA, that dissolves and separates in water, freeing you to focus on the function of your design rather than on how to make it 3D printable.
    $725.00 AUD, inc GST
    AUD, inc GST

    $725.00 AUD

  • LulzBot Borosilicate Glass Bed (300mm x300mm) CE04416 LulzBot Australia

    LulzBot Borosilicate Glass Bed (300mm x300mm)

    1 reviews 0 5 5
    SKU: CE04416
    This is the same high-quality borosilicate glass supplied for the Prusa Mendel and AO series 3D printers, except that now it comes as a large 300x300mm sheet.
    $52.00 AUD, inc GST
    AUD, inc GST

    $52.00 AUD

  • LulzBot Half Height NEMA 17 Stepper Motor CE04417 LulzBot Australia

    LulzBot Half Height NEMA 17 Stepper Motor

    SKU: CE04417
    These Half Height NEMA 17 Stepper Motors are designed for LulzBot accessories made by Aleph Objects, Inc. These reliable motors can also be used for RepRap 3D printer builds and other robotics and maker projects.
    $19.00 AUD, inc GST
    AUD, inc GST

    $19.00 AUD

  • LulzBot Mini Enclosure by Printed Solid CE04650 LulzBot Australia

    LulzBot Mini Enclosure by Printed Solid

    SKU: CE04650
    Minimize warping caused by drafts or cold 3D printing environments with the LulzBot Mini Enclosure by Printed Solid. This enclosure was designed for the Lulzbot Mini and helps keep curious hands and paws away from your 3D printer.
    $220.00 AUD, inc GST
    AUD, inc GST

    $220.00 AUD

  • LulzBot Moons Nema 17 Stepper Motor Damper CE04418 LulzBot Australia

    LulzBot Moons Nema 17 Stepper Motor Damper

    1 reviews 0 5 5
    SKU: CE04418
    This stepper motor damper reduces the volume of the music your 3D printer makes down to a soft whisper. Perfect for the NEMA-17 Stepper Motors used on the Lulzbot Mini 3D Printer.
    $15.00 AUD, inc GST
    AUD, inc GST

    $15.00 AUD

  • LulzBot Wiper Replacement Kit - 5PK CE04408 LulzBot Australia

    LulzBot Wiper Replacement Kit - 5PK

    SKU: CE04408
    This is a direct replacement for the wiping pads on the LulzBot Mini/Taz 6. Advanced 3D printer users can also use this to help make adapting easy when upgrading their own 3D printer to use the LulzBot Mini bed levelling solution.
    $14.50 AUD, inc GST
    AUD, inc GST

    $14.50 AUD

  • LulzBot NEMA 17 Stepper Motor, Moons' Including Adapter CE04419 LulzBot Australia

    LulzBot NEMA 17 Stepper Motor, Moons' Including Adapter

    SKU: CE04419
    These stepper motors feature a built in wiring connector for compatiblilty with both the LulzBot TAZ and the LulzBot Mini 3D printer. Two compatible wiring adapters are included, one for the LulzBot TAZ and one for the LulzBot Mini. This is a direct replacement for the stepper motor used on the LulzBot TAZ 6 desktop 3D printer, and also works with previous generations going back to the LulzBot TAZ 3.
    $33.00 AUD, inc GST
    AUD, inc GST

    $33.00 AUD

  • LulzBot Mini PEI Sheet CE04405 LulzBot Australia

    LulzBot Mini PEI Sheet

    SKU: CE04405
    This PEI sheet is a direct replacement for the PEI (Polyetherimide) print surface on the LulzBot® Mini. This revolutionary new print surface has been tested by the advanced members of the LulzBot community and has proved to be an easier and more reliable 3D printing surface.
    $36.50 AUD, inc GST
    AUD, inc GST

    $36.50 AUD

  • LulzBot v2 (Hexagon) Hot End Kit 3.0 (.5mm nozzle) CE04396 LulzBot Australia

    LulzBot v2 (Hexagon) Hot End Kit 3.0 (.5mm nozzle)

    1 reviews 0 5 5
    SKU: CE04396
    Custom built with 3D printing in mind, this 0.5mm hot-end has been designed to be the best upgrade you can make to your RepRap or other DIY 3D printer. The all-metal construction raises your maximum extrusion temperature to 300°C. A lengthened heater block increases the melting zone to allow you to print faster and more reliably. The compact cooling zone provides cooling while not sacrificing build area.
    $100.00 AUD, inc GST
    AUD, inc GST

    $100.00 AUD

  • LulzBot TAZ MOARstruder Tool Head CE04646 LulzBot Australia

    LulzBot TAZ MOARstruder Tool Head

    1 reviews 0 5 5
    SKU: CE04646
    The new LulzBot® TAZ Single Extruder Tool Head v2 has arrived. Built with an all metal LulzBot® Hexagon Hot End, this tool head is capable of heating up to to 300°C (572°F), so it easily handles standard filaments like HIPS, PLA, and ABS, as well as advanced filaments including heavy duty nylon, T-Glase, and polycarbonate, and aesthetic varieties of wood- and stone-like filaments.
    $575.00 AUD, inc GST
    AUD, inc GST

    $575.00 AUD

  • LulzBot Micro Blower 5.5v CE05226 LulzBot Australia

    LulzBot Micro Blower 5.5v

    1 reviews 0 5 5
    SKU: CE05226
    Say hello to Lulzbots little friend, the 5.5 volt Micro Blower! This micro blower component utilizes power-saving axial air-gap cooling and is ideal for cooling the heat sink on your 3D printer, especially if you are building your own hot end or an entire RepRap 3D printer.
    $25.00 AUD, inc GST
    AUD, inc GST

    $25.00 AUD

  • LulzBot Taz Heat Bed Kit CE04406 LulzBot Australia

    LulzBot Taz Heat Bed Kit

    SKU: CE04406
    Great 3D prints start with a good foundation. This assembled LulzBot™ TAZ Heat Bed Kit is a direct replacement for the LulzBot TAZ heated bed.
    $220.00 AUD, inc GST
    AUD, inc GST

    $220.00 AUD

  • LulzBot TAZ Aerostruder Tool Head CE05356 LulzBot Australia

    LulzBot TAZ Aerostruder Tool Head

    SKU: CE05356
    Precision and versatility come together in the LulzBot TAZ Aerostruder Tool Head, featuring the popular Titan Aero hot end and extruder from E3D. This tool head mounts quickly and easily to your LulzBot TAZ 3D Printer and incorporates a powerful centrifugal fan and 360-degree part cooling for excellent fine detail, bridging, and overhang performance
    $345.00 AUD, inc GST
    AUD, inc GST

    $345.00 AUD

  • Lulzbot Taz 5 3D Printer CE00035 LulzBot Australia

    Lulzbot Taz 5 3D Printer

    2 reviews 0 5 5
    SKU: CE00035
    The TAZ 5 3D printer represents one of the more recent revisions in Lulzbots high performance desktop 3D printer range. If you are a seasoned 3D printer looking for a printer that is reliable, upgradable and produces impressive prints every time, the Taz 5 is for you. This 3D printer provides you with a wide range of features that facilitate more consistent, higher quality prints although, it comes pretty bare bones; not featuring the auto-bed levelling upgrade of the Taz 6 that everyone has come to love.

    Regular Price: $2,995.00

    Special Price $2,445.00 AUD, inc GST

    AUD, inc GST

    $2,445.00 AUD

  • LulzBot TAZ FlexyDually Tool Head v2 CE04389 LulzBot Australia

    LulzBot TAZ FlexyDually Tool Head v2

    SKU: CE04389
    Bring flexibility and strength to your 3D printed objects with the dependable LulzBot® TAZ FlexyDually Tool Head v2. Combine flexible and rigid materials to achieve unique 3D printed objects
    $720.00 AUD, inc GST
    AUD, inc GST

    $720.00 AUD

  • LulzBot TAZ 4/5 External Bed Harness CE05358 LulzBot Australia

    LulzBot TAZ 4/5 External Bed Harness

    SKU: CE05358
    Designed as a direct replacement for the LulzBot TAZ 4 and LulzBot TAZ 5 external heated bed wiring harness. This wiring harness connects the control box to the silicone heater and the temperature sensing thermistor used in the print surface.
    $27.50 AUD, inc GST
    AUD, inc GST

    $27.50 AUD

  • LulzBot Molex SL 22-24 AWG Crimp Terminal Pin (x30) CE05427 LulzBot Australia

    LulzBot Molex SL 22-24 AWG Crimp Terminal Pin (x30)

    SKU: CE05427
    Organized and trustworthy wiring depends on reliable connectors. These Molex SL™ Crimp Terminal Pins are direct replacements for the wiring terminations used in LulzBot 3D Printer electrical harnesses.
    $13.55 AUD, inc GST
    AUD, inc GST

    $13.55 AUD

Set Ascending Direction

1-20 of 49

Page:
  1. 1
  2. 2
  3. 3