Search results for: 'usb type-a cable'

Get your projects connected with this convenient microUSB cable!

Don't be fooled by the appearance of this cable, it's not just a regular micro USB cable, but a USB OTG (On the Go) adapter which allows you to connect a mouse, keyboard, or other standard USB devices.

This USB A to B cable is perfect for connecting microcontrollers to your PC, with a strong braided cable it is sure to last through many projects.

This USB A to micro B cable is perfect for connecting microcontrollers to your PC, with a strong braided cable it is sure to last through many projects.

Standard issue USB 2.0 cables. This is the most common A to B Male/Male type peripheral cable. Compatible with most Arduino boards such as Arduino Mega, Romeo, Arduino Duemilanove.

The cable is easiest way ever to connect to your microcontroller/Raspberry Pi/WiFi router serial console port. Inside the big USB plug is a USBSerial conversion...

As technology changes and adapts, so does Adafruit. This USB Type A to Type C cable will help you with the transition to USB C, even if you're still totin' around...

This handy USB extension cable will make it easy for you to enclose a device that has a A type (USB host) port. We think this would be most handy when putting a...

This USB A to mini B cable is perfect for connecting microcontrollers to your PC, with a strong braided cable it is sure to last through many projects.

This is a 5V/3A USB-A to Type-C cable supporting large current charging and data transfer, and compatible with all USB type-C-enabled mobile phones or controller...

USB 2.0 type A to mini USB 5-pin. This is a new, smaller connector for USB devices. mini USB connectors are about half the height of mini USB.

USB C is fantastic. But until we have converted all our hubs, chargers, and ports over to USB C this is the cable you’re going to need. Supporting USB 3.1 speeds...

This handy short USB Type-C sync & charge cable is compatible with the latest Android® smartphones and tablets. The cable is 20cm and is of a flat...

This is a standard issue USB 2.0 cable. This is the most common A to B Male/Male type peripheral cable, the kind that’s usually used for printers. Compatible with most SFE designed USB boards as well as USB Arduino boards like the Uno.

This extension is a Snap-In panel mount, meaning you cut your hole and snap it in - No drilling/screws required! The 30cm cable allows you to attach to your device and have a working usb extension to the external, female USB-A port.

USB 2.0 Type-C plug to USB 2.0 A plug

This panel mount cable is great for making USB power connections with a panel-mount setup. On the rectangular panel-mount side you get a USB Type A...

If you'd like to connect a USB-host-capable chip to your USB peripheral, this cable will make the task very simple. There is no converter chip in this cable! It's...

This Micro-USB cable is extremely thin (2mm diameter), light, and flexible, which makes it easier to use than bulkier cables that tend to take up more desk space and pull small devices off tables. The 6 ft (1.8 m) cable is terminated on one end by a Type-A USB plug and on the other by a Micro-B USB plug. Note that this cable is only capable of low- and full-speed USB, not high-speed USB.

These are your standard issue USB 2.0 type A to micro USB 5-pin... but wait, what's this? These cables have minor, yet genius modifications that allow both ends...

This panel mount cable will allow you to enclose a device that has a USB A port, and also converts it to a modern USB C connector at the same time. Perfect for placing...

This panel mount cable is great for making USB Host connections with a panel-mount setup. On the rectangular panel-mount side you get a USB Type A...

Power your Tiny FX projects with these 30cm USB-A to JST-SUR cables, designed for discreet power delivery while maintaining compatibility with standard USB power sources.

USB 3.0 Type C plug to USB 3.0 A plug

This here is your standard A-miniB USB cable, for USB 1.1 or 2.0. Perfect for connecting a PC to your Teensy, USB Lipo charger (among other things). The cable is...

This here is your standard A to micro-B USB cable, for USB 1.1 or 2.0. Perfect for connecting a PC to your NETduino (among other things). Approximately 3 feet /...

USB On-The-Go is a really useful USB specification! It allows some small devices that would usually be unable to act as a host to have limited hosting capabilities! USB-OTG is common for things like tablet computers and smartphones in order to allow for USB peripherals like flash-drives, keyboards, etc. to be hooked up.

This Mini-USB cable is six feet long (1.8 m) and has a male Type-A connector on one end and a male Mini-B connector on the other. This cable works with high-speed USB devices.

Some days we're feeling extra fancy here at the 'fruit warehouse, and we have a big soft spot for woven fabric cables. Like, peep this fully...

1M Flat White Anti-Tangle USB Type-A to Micro-B USB Noodle Cable. This cable is compatible with the BBC micro:bit and can be used with the newer LilyPad boards.

USB-C is fantastic. What makes this cable even better is that one of the features we love so much about USB-C has been replicated to the USB-A 2.0 plug! These cables...

This is a flexible USB-A to USB-C cable...

Enables you to connect two USB devices together that each have a Type A Female

This panel mount cable will allow you to enclose a device that has a USB A port, and also converts it to a modern USB C connector at the same time. Perfect for placing...

A flexible USB-A to Micro-B, USB 2.0 cable...