Search results for: 'through-hole pin headers'

40 results

Through Hole Inline Pogo Pin Header - 9 Pins with 0.1" Spacing

Brand: Adafruit
Pogo pins are little spring-loaded contacts, very handy for making jigs, or making momentary (but electrically solid) contacts. We use them by the dozen...
$3.50 AUD, inc GST

JST Right Angle Connector - Through-Hole 3-Pin

Brand: SparkFun
This is a 3-pin, through-hole PH series JST connector. The pins are spaced by 2mm.
$1.95 AUD, inc GST

0.05" Pitch Thru-Hole Female Socket Header 2x5 10-pin

Brand: Adafruit
The small, but mighty 0.05" Pitch Thru-hole Female Socket Header 2x5 10-pin. We had an extra batch of these headers when we were adding...
$1.05 AUD, inc GST

Male Pin Header 2.54mm (2x40)

Brand: Core Electronics

Need a customisable connector for random projects?

$0.85 AUD, inc GST

Header - 6-pin Female (PTH, 0.1")

Brand: SparkFun
These are standard 0.1" spaced header pins that can be through-hole mounted. This header connects perfectly with most 6-pin male headers.
$1.35 AUD, inc GST

Header - 2x23-pin Male (PTH, 0.1")

Brand: SparkFun
This is a 2x23 pin male PTH header. This piece is in the common configuration for Beaglebone Black headers that can be broken apart to form smaller header formations. Each pin has a spacing of 0.1" in between each other.
$2.20 AUD, inc GST

Header - 2x5 Pin (Male, 1.27mm)

Brand: SparkFun
This is a super small, 2x5 pin male PTH header. This header is in the common configuration for JTAG applications. Each pin has a spacing of 1.27mm in between each...
$3.65 AUD, inc GST

Header - 10-pin Female (PTH, 0.1")

Brand: SparkFun
These are standard 0.1" spaced header pins that can be through-hole mounted. This header connects perfectly with most 10-pin male headers.
$1.35 AUD, inc GST

Header - 8-pin Female (PTH, 0.1")

Brand: SparkFun
These are standard 0.1" spaced header pins that can be through-hole mounted. This header connects perfectly with most 8-pin male headers.
$1.35 AUD, inc GST

Header - 10-pin Male (SMD, 0.1")

Brand: SparkFun
These are standard 0.1" spaced header pins that can be surface mounted for applications where through-hole pins won’t work. The surface mount side of the legs are staggered for stress relief.
$1.90 AUD, inc GST

SWD 0.05 Pitch Connector - 10 Pin SMT Box Header

Brand: Adafruit
This 1.27mm pitch, 2x5 male SMT Box Header is the same one used on Adafruit's SWD Cable Breakout Board. The header alone is great if you want to incorporate this piece...
$3.05 AUD, inc GST

Raspberry Pi GPIO Tall Header - 2x20

Brand: SparkFun
This 2x20 “tall” header has the same number and spacing of pins as a Raspberry Pi and provides your board with the ability to extend the heights of your GPIO to...
$5.95 AUD, inc GST

Stackable Header - 2x23 Pin Female

Brand: SparkFun
This is a 2x23 pin female PTH header, with extra long legs which makes great for stacking. This piece is in the common configuration for Beaglebone Black headers. Each pin has a spacing of 0.1" in between each other.
$5.70 AUD, inc GST

36-pin Stacking header - pack of 5!

Brand: Adafruit
Headers are like the duct tape of electronics. They're great for connecting things together, soldering to perf-boards, sockets for wires or break-away header, etc...
$12.45 AUD, inc GST

2.54mm 1x20-Pin Right Female Header

Brand: Core Electronics

If you've got exactly twenty positions for pins on the edge of your board you want some female headers on to interface with, these headers have you covered.

$0.74 AUD, inc GST

Header - 6-pin Male (SMD, 0.1")

Brand: SparkFun
These are standard 0.1" spaced header pins that can be surface mounted for applications where through-hole pins won’t work. The surface mount side of the legs are staggered for stress relief.
$1.30 AUD, inc GST

Header - 6-pin Female (SMD, 0.1", Right Angle)

Brand: SparkFun
This is a SMD 6 pin right angle female header. We realized that we have had the male version of this header available for awhile now, but never the female. Now you have the ability to get both!
$2.20 AUD, inc GST

Header - 8-pin Female (SMD, 0.1")

Brand: SparkFun
These are standard 0.1" spaced header pins that can be surface mounted for applications where through-hole pins won’t work. The surface mount side of the legs are staggered for stress relief.
$2.70 AUD, inc GST

Break Away Headers - Right Angle 2x40

Brand: SparkFun
This is a 2x40 pin right-angle PTH header. This header can be broken apart with a fair amount of force to form smaller header formations. Don’t worry, it’s easy enough to break it where you need! Each pin has a spacing of 0.1" in between each other.
$4.80 AUD, inc GST

ATX Power Supply Connector - Right Angle

Brand: SparkFun
This is a right-angle, 24-pin Molex Mini-Fit Jr.™ connector, commonly used as the power supply connector on ATX motherboards. Two rows of twelve pins are broken out two rows of through-hole male headers. See the datasheet below for pin spacing dimensions.
$3.80 AUD, inc GST

CT432-HSWF65MR TMR Current Sensor Large Carrier -65A to +65A, 5V

Brand: Pololu
This is the large version of a simple carrier for Allegro’s CT432-HSWF65MR TMR-based, electrically isolated current sensor that is optimized for high...
$28.40 AUD, inc GST

SparkFun NanoBeacon Lite Board - IN100

Brand: SparkFun
The SparkFun IN100 NanoBeacon Lite Board offers a 2.4 GHz wireless low energy BT beacon breakout with exceptional low power consumption features...
$11.15 AUD, inc GST

2mm 10pin XBee Header

Brand: SparkFun
This is a 10-pin header with 2mm pitch that mates with our XBee socket. It can be used for making ‘dummy XBees’ or anything else you want!
$1.75 AUD, inc GST

SparkFun Spectral UV Sensor - AS7331 (Qwiic)

Brand: SparkFun
The SparkFun AS7331 Qwiic Spectral UV Sensor measures UV radiation on three channels, UVA, UVB, and UVC, with high sensitivity and accuracy...
$48.45 AUD, inc GST

Pololu Carrier for MQ Gas Sensors (Bare PCB Only)

Brand: Pololu
This carrier board is designed to work with any of the MQ-series gas sensors, simplifying the interface from 6 to 3 pins—ground, power and analog voltage output—that are broken out with a 0.1" spacing, making the board compatible with 0.1" headers and standard breadboards and perfboards. This board has two mounting holes and provides convenient pads for mounting the gas sensor’s required sensitivity-setting resistor.
$2.05 AUD, inc GST

ACS709 Current Sensor Carrier -75A to +75A

Brand: Pololu
This board is a simple carrier of Allegro’s ±75A ACS709 Hall effect-based linear current sensor with overcurrent fault output, which offers a low-resistance (~1.1 mΩ) current path and electrical isolation up to 2.1 kV RMS. The sensor has optimized accuracy for currents from -37.5 A to 37.5 A, and the analog voltage output is linear for current magnitudes up to 75 A. The ratiometric output voltage is centered at VCC/2 and has a typical error of ±2%. It operates from 3 V to 5.5 V, so it can interface directly to both 3.3 V and 5 V systems.
$24.10 AUD, inc GST

TFT LCD Display Module Screen - 2.0in., 240x320 (SPI Interface)

Brand: SparkFun
A small 2.00 Inch 240x320 IPS TFT display driven by the ST7789 display driver...
$34.85 AUD, inc GST

ACS72981LLRATR-100U3 Current Sensor Large Carrier 0A to 100A, 3.3V

Brand: Pololu
This is the large version of a simple carrier for Allegro’s ACS72981LLRATR-100U3 Hall effect-based, electrically isolated current sensor, which offers a...
$28.40 AUD, inc GST

Raspberry Pi Model B - GPIO Shrouded Header (2x20)

Brand: SparkFun
This 2x20 shrouded header has the same number and spacing of pins as the Raspberry Pi B+ so you can easily connect via ribbon cable to the low-level peripherals and get hacking! This through-hole header has 40 0.1"-spaced pins and is keyed for polarity.
$1.80 AUD, inc GST

7-Segment Display - 4-Digit (White)

Brand: SparkFun
This is a basic, 4-digit 7-segment display - white in color. It has a common anode. The display features one decimal point per digit, and individually controllable apostrophe and colon points.
$10.90 AUD, inc GST

7-Segment Display - 4-Digit (Red)

Brand: SparkFun
This is a basic, 4-digit 7-segment display - red in color. It has a common anode. The display features one decimal point per digit, and individually controllable apostrophe and colon points.
$5.95 AUD, inc GST

SparkFun NanoBeacon Board - IN100

Brand: SparkFun
The SparkFun IN100 NanoBeacon Board offers a 2.4 GHz wireless low energy BT beacon breakout with exceptionally low-power consumption features...
$10.20 AUD, inc GST

ACS37041KLHBLT-010B5 Current Sensor Compact Carrier -10A to +10A, 5V

Brand: Pololu
This is the larger version of a simple carrier for Allegro’s ACS37041KLHBLT-010B5 Hall effect-based, electrically isolated current sensor in a 5-pin...
$7.50 AUD, inc GST

Pololu Isolated USB-to-I²C Adapter

Brand: Pololu
This USB-to-I²C adapter enables a PC or other USB host to act as the controller on an I²C bus, reading and writing data from I²C target devices connected...
$19.45 AUD, inc GST

SparkFun Red Vision Camera Board - HM01B0 (Color)

Brand: SparkFun
The SparkFun Red Vision Camera Board - HM01B0 is a breakout board for the HM01B0 320 x 320 color camera module from Himax©. The Camera Board breaks out...
$94.95 AUD, inc GST

Pololu Isolated USB-to-I²C Adapter with Isolated Power

Brand: Pololu
This USB-to-I²C adapter enables a PC or other USB host to act as the controller on an I²C bus, reading and writing data from I²C target devices connected...
$24.60 AUD, inc GST

Pololu Ideal Diode Reverse Voltage Protector, 4-60V, 25A

Brand: Pololu
This module protects a connected load from reverse voltages down to -60 V. This version acts as an ideal diode, blocking reverse current from output to...
$13.95 AUD, inc GST

JST SH 4-pin Right Angle Connector (10-pack) - Qwiic Compatible

Brand: Adafruit
If you're a DIY enthusiast who likes to micro-manage your project's connections, here is a 10-pack of some micro JST SH connectors! They're solid plastic with 4...
$7.95 AUD, inc GST

SMT Socket Header Kit for FeatherWings

Brand: Adafruit
These two SMT Socket Headers alone are, well, lonely. But pair them with any of our Feather boards and you're in business!
$5.30 AUD, inc GST

12V, 2.8A Step-Down Voltage Regulator D30V30F12

Brand: Pololu
This small synchronous switching step-down (or buck) regulator takes an input voltage of up to 45 V and efficiently reduces it to 12 V. The board measures...
$34.60 AUD, inc GST
Feedback

Please continue if you would like to leave feedback for any of these topics:

  • Website features/issues
  • Content errors/improvements
  • Missing products/categories
  • Product assignments to categories
  • Search results relevance

For all other inquiries (orders status, stock levels, etc), please contact our support team for quick assistance.

Note: click continue and a draft email will be opened to edit. If you don't have an email client on your device, then send a message via the chat icon on the bottom left of our website.

Makers love reviews as much as you do, please follow this link to review the products you have purchased.