Search results for: 'pigtail cables'

This 100mm cable is for connecting PiicoDev modules together - it is a 4-wire harness with 1mm pitch SH connectors on each end.

This 50mm cable is for connecting PiicoDev modules together - it is a 4-wire harness with 1mm pitch SH connectors on each end.

This 200mm cable is for connecting PiicoDev modules together - it is a 4-wire harness with 1mm pitch SH connectors on each end.

These 3-pin JST-SM pigtail connectors mate perfectly with LED strips and other applications that require only two lines and an option for quick connection and disconnection...

This 5.5" (14cm) cable has two 26AWG conductors with a 2mm-pitch 2-pin female JST PH-style connector. The other ends of the wires are unterminated; they can be cut to length to match your application. The red and black wires are twisted together to reduce noise.

This 6" (15cm) cable has two 26AWG conductors with a 2.5mm-pitch 2-pin female JST XH-style connector. The spacing is very close to 0.1", which means this connector will work with 0.1" male header pins and standard perfboards and solderless breadboards. The other ends of the wires are unterminated; they can be cut to length to match your application. The red and black wires are twisted together to reduce noise.

TRRS connectors are the 3.5mm audio-style connectors that you see on some phones, MP3 players and development boards. TRRS stands for “Tip, Ring, Ring, Sleeve,” which reflects the fact that, unlike a standard stereo connector, this actually has three conductors and a ground. Some devices use the extra conductor for a microphone (like hands-free headsets) or to carry a video signal (like in some MP3/MP4 players) If you’re hacking on something that has a 4-conductor audio jack, being able to plug straight in will keep your build clean and simple.

This is a simple jumper adapter cable that comes pre-terminated with a female JST connector on one end and a breadboard hookup pigtail on the other. This cable makes it easy to connect components with a JST connector to a breadboard or an Arduino-based device’s pins.

Connect this to that without soldering using these handy mini alligator clip test leads. Approximately 4.5" overall cables with alligator clip on each end, color...

This 10 cm (4") cable has six 28 AWG wires and 6-pin female JST SH-type connectors on both ends. These connectors work with our Micro Metal Gearmotor ...

These are various leaded cables for attaching to multimeters, power supplies, oscilloscopes, function generators, etc. Cables come in red/black pairs.

One of the most common converter cables you'll want in your cable collection - this 32" long cable converts a standard 3.5mm stereo jack to pigtail wires. Ground...

These 2-pin JST-SM pigtail connectors mate perfectly with LED strips and other applications that require only two lines and an option for quick connection and disconnection...

This panel mount cable is great for making USB Host connections with a panel-mount setup. On the rectangular panel-mount side you get a USB Type A...

These are various leaded cables for attaching to multimeters, power supplies, oscilloscopes, function generators, etc. Cables come in red/black pairs.

This 6-conductor, 10 cm (4") cable has 24 AWG wires and 6-pin female JST PH-type connectors (2mm pitch) on both ends...

This 2-conductor, 25 cm (10") cable has 24 AWG wires and 2-pin female JST PH-type connectors (2mm pitch) on both ends...

These 4-pin JST-SM pigtail connectors mate perfectly with LED strips and other applications that require only two lines and an option for quick connection and disconnection...

These premium wires are stranded 26AWG wires with female terminals on both ends. Together with Pololu's 0.1" crimp connector housings, these wires can be used to make custom cables with 0.1" (2.54mm) connectors. These 12" (30 cm) wires have black insulation and ship in packs of 10.

These premium wires are stranded 26 AWG wires with female terminals on both ends. Together with our 0.1" crimp connector housings, these wires can be used...

This 2-conductor, 12 cm (4.5") cable has 24 AWG wires and a 2-pin female JST PH-type connector (2mm pitch) on one end. The other ends of the wires are...

These premium wires are stranded 26AWG wires with female terminals on one end and male terminals on the other end. Together with Pololu's 0.1" crimp connector housings, these wires can be used to make custom cables with 0.1" (2.54mm) connectors. These 6" (15 cm) wires have black insulation and ship in packs of 10.

This 5-conductor, 10 cm (4") cable has 24 AWG wires and 5-pin female JST PH-type connectors (2mm pitch) on both ends...

These premium wires are stranded 26AWG wires with female terminals on both ends. Together with Pololu's 0.1" crimp connector housings, these wires can be used to make custom cables with 0.1" (2.54mm) connectors. These 12" (30 cm) wires have red insulation and ship in packs of 10.

Power your Raspberry Pi 4 from an ATX power supply 5V line with our custom MOLEX to USB-C cable! Great for spare PC ATX power supplies or even when...

This 6-conductor, 75 cm (30") cable has 24 AWG wires and a 6-pin female JST PH-type connector (2mm pitch) on one end. The other ends of the wires are...

If you'd like to make a connection to a board or breakout with Seeed Grove connection, this 100mm long 4-wire cable is fitted with a Grove connector...

A 300mm hookup cable with a 2x8 C-Grid III Female connector at one end and unterminated (bare wire) at the other. Suitable for connecting to the...

This servo cable has a shrouded male servo connector on one end, and 3x breadboard hookup pigtails at the other end...

This is a 4 pack of wires that are pre-terminated with an alligator clip on one end and a hookup pigtail on the other. Alligator clips are a staple part for any workbench and with these cables you will be able to easily incorporate those clips into a breadboard, development platform, or anything else that you would normally be able to attach a hookup wire to.

RF cables are required when connecting RF Explorer to other instruments or devices. This 50cm cable is good for any frequency up to 3GHz, and can fit RF...

These premium wires are stranded 26 AWG wires with female terminals on one end and male terminals on the other end. Together with our 0.1" crimp connector...

These premium wires are stranded 26 AWG wires with female terminals on both ends. Together with our 0.1" crimp connector housings, these wires can be used...

These premium wires are stranded 26AWG wires with male terminals on both ends. Together with Pololu's 0.1" crimp connector housings, these wires can be used to make custom cables with 0.1" (2.54mm) connectors. These 6" (15 cm) wires have red insulation and ship in packs of 10.

These premium wires are stranded 26 AWG wires with female terminals on one end and male terminals on the other end. Together with our 0.1" crimp connector...

These premium wires are stranded 26AWG wires with female terminals on both ends. Together with Pololu's 0.1" crimp connector housings, these wires can be used to make custom cables with 0.1" (2.54mm) connectors. These 24" (60 cm) wires have blue insulation and ship in packs of 5.

This 3-conductor, 10 cm (4") cable has 24 AWG wires and 3-pin female JST PH-type connectors (2mm pitch) on both ends...

These premium wires are stranded 22AWG wires with female terminals on one end and male terminals on the other end. Together with Pololu's 0.1" crimp connector housings, these wires can be used to make custom cables with 0.1" (2.54mm) connectors. The assortment of 36" (90 cm) wires includes two each of ten different colors.

This is a jumper adapter cable that comes pre-terminated with a 6-pin JST-SH connector on one end and a breadboard hookup pigtail on the other...