Search results for: 'mx1.25 2-pin connector'
1.25mm Pitch 2-pin Cable Matching Pair - 40cm long - Molex PicoBlade Compatible
Brand: Adafruit
When 0.1" is too big, and JST PH's too chunky, these ultra-slim 1.25mm connectors are a reliable alternative. These are only 1.25mm pitch, but have a nice clicky connection.
$1.95 AUD, inc GST
1.25mm Pitch 2-pin Cable 20cm long 1:1 Cable - Molex PicoBlade Compatible
Brand: Adafruit
When 0.1" is too big, and JST PH's too chunky, this ultra-slim 1.25mm connector cable is a reliable alternative. These are 1.25mm pitch but have a nice clicky connection.
$1.50 AUD, inc GST
Breakout for JST SH-Style Connector, 2-Pin Male Top-Entry (2-Pack)
Brand: Pololu
These simple boards serve as adapters between a JST SH-style 2-pin male connector and breadboard-compatible 0.1"-pitch through holes. They work with our...
$2.80 AUD, inc GST
Breadboard to GHR-06V Cable - 6-Pin x 1.25mm Pitch
Brand: SparkFun
This is a handy cable for connecting a six pin GHR-06V type locking connector to breadboard friendly male pins. The six male pins that terminate one side of the...
$4.80 AUD, inc GST
Similar matches
JST 2-pin cable
Brand: Adafruit
Red and black tinned wires with a 2-pin JST PH connector on the end. 4" / 100mm long. Matches up nicely with Adafruit's Lipoly charger! Adafruit don't have the 'mating' version...
$1.30 AUD, inc GST
2.0mm Pitch 6-pin Cable Matching Pair - JST PH Compatible
Brand: Adafruit
These solid 2.0mm pitch connector cable pairs are great when you need something that can carry a couple of amps of current and are easy to connect and disconnect.
$2.35 AUD, inc GST
0.1" (2.54mm) Crimp Connector Housing: 1x2-Pin 25-Pack
Brand: Pololu
These two-pin housings work with Pololu's wires with pre-crimped terminals to let you quickly make custom cables that mate with various 0.1"-spaced connectors, including male or female headers and solderless breadboards. They are sold in packs of 25.
$3.75 AUD, inc GST
JST connector Kit (2.0mm)
Brand: DFRobot
This kit includes PHR-2，PHR-3 and PHR-4 housing (20 units each)， through-hole type shrouded header （20 units each）and crimp contact (100 units).
$9.97 AUD, inc GST
2.5mm Pitch 2-pin Cable Matching Pair - JST XH compatible
Brand: Adafruit
These solid 2.5mm pitch connector cable pairs are great when you need something that can carry a couple amps of current, easy to connect and disconnect, and is just-about 0.1" pitch compatible.
$1.95 AUD, inc GST
JST Right-Angle Connector - Through-Hole 2-Pin
Brand: SparkFun
This is a 2-pin, through-hole PH series JST connector. The pins are spaced by 2mm.
$1.85 AUD, inc GST
1.25mm Pitch 8-pin Cable Matching Pair - 10 cm long - Molex PicoBlade Compatible
Brand: Adafruit
These solid 1.25mm pitch connector cable pairs are great when you need something that can carry a couple of amps of current and are easy to connect and...
$2.65 AUD, inc GST
1.25mm Pitch 4-pin Cable Matching Pair - 40cm long - Molex PicoBlade Compatible
Brand: Adafruit
When 0.1" is too big, and JST PH's too chunky, these ultra-slim 1.25mm connectors are a reliable alternative. These are only 1.25mm pitch, but have a nice clicky connection.
$1.95 AUD, inc GST
1.25mm Pitch 4-pin Cable 20cm long 1:1 Symmetric Cable - Molex PicoBlade Compatible
Brand: Adafruit
When 0.1" is too big, and JST PH's too chunky, this ultra-slim 1.25mm connector cable is a reliable alternative. These are 1.25mm pitch but have a nice clicky connection.
$1.85 AUD, inc GST
JST-PH 2-Pin SMD Connector (Side Entry)
Brand: Core Electronics
Add a power connector to your SMD PCB designs with this JST-PH 2-pin compatible connector...
$0.26 AUD, inc GST
1.25mm Pitch 3-pin Cable Matching Pair - 40cm long - Molex PicoBlade Compatible
Brand: Adafruit
When 0.1" is too big, and JST PH's too chunky, these ultra-slim 1.25mm connectors are a reliable alternative. These are only 1.25mm pitch, but have a nice clicky connection.
$1.95 AUD, inc GST
2.5 mm JST XH-Style Shrouded Male Connector: 2-Pin, Right Angle (4-Pack)
Brand: Pololu
These shrouded, 2-pin JST XH-style male connectors have right-angle leads and match the female connector on the 2-pin female XH-style cable, and they also work with other many other 0.1″-pitch female connectors, such as Pololu's female premium jumper wires. They are sold in packs of four units.
$2.95 AUD, inc GST
JST-PH 2 Pin Female Connector
Brand: DFRobot
This product includes 2-pin 2.0mm mating connector housing(10 units) and crimp pins (20 units).
$1.17 AUD, inc GST
JST SH-Style Cable, 2-Pin, Female-Female, 25cm
Brand: Pololu
This 2-conductor, 25 cm (10") cable has 28 AWG wires and 2-pin female JST SH-type connectors on both ends...
$2.60 AUD, inc GST
1.25mm Pitch 5-pin Cable Matching Pair 10 cm long - Molex PicoBlade Compatible
Brand: Adafruit
These solid 1.25mm pitch connector cable pairs are great when you need something that can carry a couple amps of current and are easy to connect and disconnect.
$1.95 AUD, inc GST
1.25mm Pitch 5-pin Cable 20cm long 1:1 Cable - Molex PicoBlade Compatible
Brand: Adafruit
When 0.1" is too big, and JST PH's too chunky, this ultra-slim 1.25mm connector cable is a reliable alternative. These are 1.25mm pitch but have a nice clicky connection.
$2.50 AUD, inc GST
1.25mm Pitch 3-pin Cable 20cm long 1:1 Cable - Molex PicoBlade Compatible
Brand: Adafruit
When 0.1" is too big, and JST PH's too chunky, this ultra-slim 1.25mm connector cable is a reliable alternative. These are 1.25mm pitch but have a nice clicky connection.
$1.95 AUD, inc GST
JST-SH 4-Pin SMD Connector (Side Entry) - PiicoDev Compatible Connector
Add a small 4-pin connector to your SMD PCB designs with this JST-SH 4-pin compatible connector...
$0.23 AUD, inc GST
1.25mm Pitch 7-pin Cable 20cm long 1:N Cable - Molex PicoBlade Compatible
Brand: Adafruit
When 0.1" is too big, and JST PH's too chunky, this ultra-slim 1.25mm connector cable is a reliable alternative. These are 1.25mm pitch but have a nice clicky connection.
$2.50 AUD, inc GST
Breakout for JST PH-Style Connector, 2-Pin Male Top-Entry, with SH
Brand: Pololu
This simple board serves as an adapter between a JST PH-style 2-pin, top-entry connector and breadboard-compatible 0.1"-pitch through holes. The PH...
$2.50 AUD, inc GST
2.5 mm JST XH-Style Shrouded Male Connector: 2-Pin, Straight (4-Pack)
Brand: Pololu
These shrouded, 2-pin JST XH-style male connectors have straight leads and match the female connector on the 2-pin female XH-style cable, and they also work with other many other 0.1″-pitch female connectors, such as Pololu's female premium jumper wires. They are sold in packs of four units.
$2.80 AUD, inc GST
1.25mm Pitch 6-pin Cable Matching Pair - 10 cm long - Molex PicoBlade Compatible
Brand: Adafruit
1.25mm Pitch 6-pin Cable Matching Pair - 10 cm long - Molex PicoBlade Compatible
$2.15 AUD, inc GST
JST-PH 2-Pin SMT Right Angle Connector
Brand: Adafruit
A simple 2-pin connector that is compatible with the "JST PH 2-pin" connector - perfect for soldering to the bottom of Adafruit's 3.3V Logic Trinket and 5V Logic Trinket!...
$1.45 AUD, inc GST
1.25mm Pitch 6-pin Cable 20cm long 1:1 Cable - Molex PicoBlade Compatible
Brand: Adafruit
When 0.1" is too big, and JST PH's too chunky, this ultra-slim 1.25mm connector cable is a reliable alternative. These are 1.25mm pitch but have...
$2.45 AUD, inc GST
1.25mm Pitch 9-pin Cable 20cm long 1:N Cable - Molex PicoBlade Compatible
Brand: Adafruit
When 0.1" is too big, and JST PH's too chunky, this ultra-slim 1.25mm connector cable is a reliable alternative. These are 1.25mm pitch but have a nice clicky connection.
$2.50 AUD, inc GST
1.25mm Pitch 8-pin Cable 20cm long 1:N Cable - Molex PicoBlade Compatible
Brand: Adafruit
When 0.1" is too big, and JST PH's too chunky, this ultra-slim 1.25mm connector cable is a reliable alternative. These are 1.25mm pitch but have a nice clicky connection.
$2.60 AUD, inc GST
1.25mm Pitch 10-pin Cable 20cm long 1:N Cable - Molex PicoBlade Compatible
Brand: Adafruit
When 0.1" is too big, and JST PH's too chunky, this ultra-slim 1.25mm connector cable is a reliable alternative. These are 1.25mm pitch but have a nice clicky connection.
$2.80 AUD, inc GST
Breakout for JST SH-Style Connector, 2-Pin Male Side-Entry (2-Pack)
Brand: Pololu
These simple boards serve as adapters between a JST SH-style 2-pin male connector and breadboard-compatible 0.1"-pitch through holes.
$2.90 AUD, inc GST
Breadboard to GHR-05V Cable - 5-Pin x 1.25mm Pitch
Brand: SparkFun
This is a handy cable for connecting a five pin GHR-05V type locking connector to breadboard friendly male pins. The five male pins that terminate one side of the...
$3.15 AUD, inc GST
JST Right-Angle Connector - SMD 2-Pin (Black)
Brand: SparkFun
This is a two pin, compact surface mount JST connector...
$1.75 AUD, inc GST
Barrel Jack to 2-pin JST PH 2mm
Brand: SparkFun
Two pin JST PH 2mm connector to a 2.1x 5.5mm barrel jack, 6.25 inch long jumper cable. We use this cable to adapt from a wall power supply to a relatively small, SMD JST connector. We found that many of the SMD connectors used for battery charging were too large or were not capable of through-putting the current we wanted for faster charging. This setup, with a SMD JST connector and wall power supply, can handle up to 2A!
$6.10 AUD, inc GST
Makers love reviews as much as you do, please follow this link to review the products you have purchased.