Search results for: 'multiplexer breakout'

14 results

TCA9548A I2C Multiplexer

Brand: Adafruit
You just found the perfect I2C sensor, and you want to wire up two or three or more of them to your Arduino when you realize "Uh oh, this chip has a fixed I2C address...
$13.85 AUD, inc GST

Adafruit PCA9548 8-Channel STEMMA QT / Qwiic I2C Multiplexer - TCA9548A Compatible

Brand: Adafruit
You just found the perfect I2C sensor, available in a handy chainable Qwiic, or STEMMA QT package, and you want to wire up two or three or more of them to...
$12.40 AUD, inc GST

Adafruit PCA9546 4-Channel STEMMA QT / Qwiic I2C Multiplexer - TCA9546A Compatible

Brand: Adafruit
You just found the perfect I2C sensor, available in a handy chainable Qwiic, or STEMMA QT package, and you want to wire up two or three or four of them to...
$7.55 AUD, inc GST

Analog/Digital MUX Breakout

Brand: SparkFun
This is a breakout board for the very handy 16-Channel Analog/Digital Multiplexer/Demultiplexer CD74HC4067. This chip is like a rotary switch - it internally routes the common pin (COM in the schematic, SIG on the board) to one of 16 channel pins (CHANxx). It works with both digital and analog signals (the voltage can’t be higher than VCC), and the connections function in either direction. To control it, connect 4 digital outputs to the chip’s address select pins (S0-S3), and send it the binary address of the channel you want (see the datasheet for details). This allows you to connect up to 16 sensors to your system using only 5 pins!
$10.95 AUD, inc GST

SparkFun Multiplexer Breakout - 8 Channel (74HC4051)

Brand: SparkFun
The SparkFun Multiplexer Breakout provides access to all pins and features of the 74HC4051, an 8-channel analog multiplexer/demultiplexer. The 74HC4051 allows you to turn four I/O pins into eight multifunctional, individually selectable signals, which can be used to do everything from driving eight LEDs to monitoring eight potentiometers.
$5.95 AUD, inc GST

Adafruit PCA9546 4-Channel I2C Multiplexer - TCA9546A Compatible

Brand: Adafruit
You just found the perfect I2C sensor, and you want to wire up two or three or more of them to your Arduino when you realize "Uh oh, this chip has a...
$7.90 AUD, inc GST

SparkFun Qwiic Mux Breakout - 8 Channel (TCA9548A)

Brand: SparkFun
Do you have too many sensors with the same I2C address? Put them on the SparkFun Qwiic Mux Breakout to get them all talking on the same bus! The Qwiic Mux Breakout...
$24.95 AUD, inc GST

Adafruit ADG729 Dual 1-to-4 Analog Matrix Switch

Brand: Adafruit
Analog switches are a solid state alternative to relays, when you want a smaller, lower-power technology that won't wear out mechanically. And, as the...
$18.95 AUD, inc GST

TPS2113A Power Multiplexer Carrier with USB Micro-B Connector

Brand: Pololu
This breakout board for Texas Instruments’s TPS2113A autoswitching power multiplexer allows you to select which of two power sources is connected to a load while blocking reverse current into either of the sources. It has an adjustable current limit that can be set as high as 2 A and an adjustable switching threshold. Each input power rail on the multiplexer can be supplied with 2.8 V to 5.5 V, and the board also breaks out a USB Micro-B connector that can be used to supply one of the rails.
$16.70 AUD, inc GST

Mux Shield II

Brand: SparkFun
Sometimes you’ve got way too many inputs, or outputs… or both. How are you going to get them all connected to your Arduino? The Mux Shield, that’s how. The Mux Shield II from Mayhew Labs is an upgrade on their previous Mux Shield which makes it possible to route up to 48 analog and digital inputs or digital outputs to and from your Arduino board.
$55.75 AUD, inc GST

16 Channel Multiplexer

Brand: SparkFun
Texas Instruments CD74HC4067 16-Channel multiplexer. What can you do with it? How about taking an analog to digital reading from 16 devices with only 1 ADC channel and 4 control pins. That’s right, 16 for the price of 5! 24-Pin SSOP package. Works great with our 28-Pin SSOP to DIP adapters.
$1.75 AUD, inc GST
Similar matches

TLC5940 Breakout

Brand: SparkFun
The TLC5940 is a 16 channel PWM unit with 12 bit duty cycle control (0-4095), 6 bit current limit control (0-63), and a daisy chainable serial interface. This breakout board is a good way to take full advantage of this useful IC. All 16 PWM channels are broken out to standard 0.1" headers, which run alongside convenient voltage and ground rails. Also, because the TLC5940 can be daisy-chained, the breakout is designed to support that feature. On the left-hand side of the board all serial inputs are broken out to 0.1" headers and likewise with output on the right-hand side.
$35.50 AUD, inc GST

SparkFun 16 Output I/O Expander Breakout - SX1509

Brand: SparkFun

The SX1509 Breakout is a 16-channel GPIO expander that adds fully configurable digital I/O to your microcontroller using just two I2C wires. It also handles PWM for LED dimming, can blink or breathe pins, and has a built-in keypad engine for up to 64 buttons.

$13.35 AUD, inc GST

Pimoroni IO Expander Breakout

Brand: Pimoroni
Add oodles of extra analog-friendly input and output pins to your Raspberry Pi project!
$16.45 AUD, inc GST
Feedback

Please continue if you would like to leave feedback for any of these topics:

  • Website features/issues
  • Content errors/improvements
  • Missing products/categories
  • Product assignments to categories
  • Search results relevance

For all other inquiries (orders status, stock levels, etc), please contact our support team for quick assistance.

Note: click continue and a draft email will be opened to edit. If you don't have an email client on your device, then send a message via the chat icon on the bottom left of our website.

Makers love reviews as much as you do, please follow this link to review the products you have purchased.