Search results for: &#039;gpio expander 40&#039;

GPIO Stacking Header for Pi A+/B+/Pi 2/Pi 3 - Extra-long 2x20 Pins

Connect your own PCB to a Raspberry Pi B+ and stack on top with this normal-height female header with extra long pins. The female header part is about 8.5mm tall...

$5.65 AUD, inc GST

Isolated RS485 CAN HAT (B) For Raspberry Pi, 2-Ch RS485 and 1-Ch CAN, Multi Protections...

Isolated RS485 CAN HAT (B) For Raspberry Pi, 2-Ch RS485 and 1-Ch CAN, Multi Protections

Brand: Waveshare

$36.05 AUD, inc GST

This handy HAT sits right on the top of your Pi, and will break out the 40-Pin header on your Raspberry Pi 3B, 3B+ and 4B into 3 banks of pins, and adjacent pins to these connect to screwless spring terminals on the outside of the board.

$6.10 AUD, inc GST

Adafruit AW9523 GPIO Expander and LED Driver Breakout - STEMMA QT / Qwiic

Expand your project possibilities, with the Adafruit AW9523 GPIO Expander and LED Driver Breakout - a cute and powerful I2C expander with a lot of tricks up it's sleeve.

$9.70 AUD, inc GST

MCP23008 - i2c 8 input/output port expander

Add another 8 pins to your microcontroller using a MCP23008 port expander. The MCP23008 uses two i2c pins (these can be shared with other i2c devices), and in exchange...

$3.95 AUD, inc GST

Gravity: Expansion Board for Raspberry Pi Pico

This Gravity Expansion Board, specifically designed for Raspberry Pi Pico, is compatible with a variety of Gravity sensors and modules, offering...

$9.65 AUD, inc GST

Are you low on I/O? No problem! The SX1509 Breakout is a 16-channel GPIO expander with an I2C interface – that means with just two wires, your microcontroller can interface with 16 fully configurable digital input/output pins. But the SX1509 can do so much more than just simple digital pin control. It can produce PWM signals, so you can dim LEDs. It can be set to blink or even breathe pins at varying rates. And, with a built-in keypad engine, it can interface with up to 64 buttons set up in an 8x8 matrix.

SparkFun 16 Output I/O Expander Breakout - SX1509

Brand: Sparkfun

$13.35 AUD, inc GST

Zooz Z-Wave GPIO HAT Hub

Z-Wave Hub HAT for Pi/Home Assistant, add a low form-factor Z-wave connection to your Smart Home system.

$41.95 AUD, inc GST

IO Expansion Shield for Arduino (V6)

Our IO expansion board is evolving, the V6 IO Expansion Shield is now supporting Xbee and has colour coded pin header. It combines our popular Xbee shield with IO expansion shield(V4). It even supports SD card which provides the ultimate functional expansion for Arduino so far. As its predecessor, it supports RS485, APC220, Bluetooth , Xbee communication, servo control.

$15.40 AUD, inc GST

Serial Expansion HAT for Raspberry Pi, I2C Interface, 2-ch UART, 8 GPIOs

Serial Expansion HAT for Raspberry Pi

Brand: Waveshare

$21.35 AUD, inc GST

Expander Pi is a versatile digital and analogue expansion board. It allows you to connect your Raspberry Pi to switches, lights, sensors, and many other devices giving you a way to communicate with the outside world.

Expander Pi

Brand: AB Electronics

$46.50 AUD, inc GST

Add oodles of extra analog-friendly input and output pins to your Raspberry Pi project!

Pimoroni IO Expander Breakout

Brand: Pimoroni

$16.45 AUD, inc GST

This one is for all the makers and designers who want to use terminal blocks with the Pico's GPIO. The Terminal GPIO Expansion allows you to use both...

Terminal GPIO Expansion for Pico

Brand: The Pi Hut

$22.80 AUD, inc GST

Out of stock

IO Expansion HAT for Raspberry Pi 4B/3B+

This IO Expansion HAT from DFRobot is the perfect companion for your Raspberry Pi 4B/3B+! It leads out all of the IO ports on Raspberry Pi including digital port...

$16.85 AUD, inc GST

Multi Function Expansion Board for UNIHIKER M10 / K10 & micro:bit (Power & Motion)

Supercharge UNIHIKER K10/M10 projects. The all-in-one expansion board adds a motor driver, 18650 power, and extensive IO, solving pin and power...

$31.60 AUD, inc GST

Oh boy, this is a Big. Damn. Switch. Program it to switch loads up to 40V / 10A connected to the HT0740 breakout's sturdy screw terminals, and use up to...

HT0740 40V / 10A Switch Breakout

Brand: Pimoroni

$28.85 AUD, inc GST

Raspberry Pi Motor Driving Expansion Board (Compatible with Raspberry Pi 4B / 3B+ / 3B / Zero)

The fully-featured robot motor expansion board supports multiple motors and servos. Perfect for Raspberry Pi Zero/Zero W/A+/B+/2B/3B/3B+/4B. ...

$50.30 AUD, inc GST

Dual-channel RS485 Expansion Hat for Raspberry Pi 4B

Want to increase reliability and anti-interference for data transmission in your industrial applications? Try the RS485 Expansion HAT for Raspberry Pi....

$50.25 AUD, inc GST

The Giant Butterfly allows four HATs or pHATs (or a mix) to be attached to a single Raspberry Pi 40-way connector. All pins are connected and the ID_SD...

Giant Butterfly for Raspberry Pi

Brand: The Pi Hut

$9.50 AUD, inc GST

Adafruit Perma-Proto 40-Pin Raspberry Pi Half-Size PCB Kit - with 2x20 Header

We put a PermaProto half-sized proto board in a blender with a Pi Cobbler and out emerged this very tasty confection - the 40-Pin PermaProto for Pi! It has the Cobbler...

$12.10 AUD, inc GST

Arduino Expansion Shield for Raspberry Pi B+

What's the difference between Pi and Arduino? We all know Raspberry Pi is a mini-computer running on Linux operating system; while Arduino is a microcontroller running on simple I/Os. Both of them focuses on very different areas. Compared with Arduino, the Pi gets much better computing performance.

$33.75 AUD, inc GST

Similar matches

PiicoDev LiPo Expansion Board for Raspberry Pi Pico

Brand: PiicoDev

The PiicoDev® LiPo Expansion Board for Raspberry Pi Pico is a great way to start experimenting with Raspberry Pi Pico/RP2040. Use the on-board PiicoDev connector to quickly and easily connect with the PiicoDev family of sensor modules without soldering.

$5.40 AUD, inc GST