Search results for: 'bus pirate'
Helpful resources
1
Bus Pirate - v3.6a
Brand: Sparkfun
The Bus Pirate v3.6a, created by Ian Lesnet, is a troubleshooting tool that communicates between a PC and any embedded device over 1-wire, 2-wire, 3-wire, UART, I2C, SPI, and HD44780 LCD protocols - all at voltages from 0-5.5VDC. This product eliminates a ton of early prototyping effort when working with new or unknown chips.
$70.70 AUD, inc GST
Bus Pirate 5 Base Kit with Bus Pirate 5 PCB and Enclosure
Brand: Adafruit
Bus Pirate 5 is the latest edition of the original universal serial interface trusted by hackers since 2008. We've stocked and loved the Bus Pirate 4...
$284.95 AUD, inc GST
Bus Pirate v3.6 universal serial interface (Seeed Studio)
Brand: Seeed Studio
Bus Pirate v3 is a universal bus interface that talks to electronics from a PC serial terminal. Get to know a chip without writing code. Eliminates a ton...
$58.60 AUD, inc GST
Bus Pirate Cable
Brand: Sparkfun
This is an interface cable for the Bus Pirate v3/v3.6, designed to connect to the 2x5 I/O header. The cable’s connector is composed of two rows of five 0.1" spaced pins; it’s also polarized, as is the mating connector on-board the Bus Pirate, so you can only connect the cable in one direction. The leads of the cable are terminated with female ends to mate with test hooks (coming soon!).
$9.60 AUD, inc GST
RS232-TTL Converter
Brand: DFRobot
This adapter helps to connect TTL (Transistor-Transistor Logic) level signals to RS232 interface.
$13.50 AUD, inc GST
Bus Pirate 5 Probe Cable Set
Brand: Adafruit
This luxurious accessory will make your Bus Pirate 5 a joy to use. This keyed and locking probe cable made of premium soft and flexible silicone-coated...
$62.40 AUD, inc GST
Bus pirate basic probe set
Brand: Adafruit
This is a interface cable designed for Bus Pirate v3 & v3.6 which makes it easier to connect the Bus Pirate to a circuit and get hacking!
$32.65 AUD, inc GST
Bus Pirate 5 SOIC / SOP8 SPI Flash Adapter
Brand: Adafruit
This accessory for the Bus Pirate 5 makes it trivial to program bare flash memory chips without clips or soldering. SOP8 150mil and 208mil are the most...
$26.95 AUD, inc GST
Bus Pirate v3 probe Kit (Seeed Studio)
Brand: Seeed Studio
This is a interface cable designed for Bus Pirate V3 which can makes it easier to connect the Bus Pirate to a circuit and get hacking.
$22.95 AUD, inc GST
Bus Pirate 5 KF141 Quick Connect Adapter - Right Angle
Brand: Adafruit
This accessory makes wiring up sensors to your Bus Pirate 5 "a snap", with snap-open quick connects that plug into the BP5s header port....
$10.45 AUD, inc GST
Multi USB/RS232/RS485/TTL Converter
Brand: DFRobot
Multiplexer has a set of interfaces for a variety of multi-function adapter plates. It supports USB, TTL, RS232, RS485 interfaces between the system conversions. What's more powerful is that it also supports one input multiple outputs, which greatly facilitates the communication between various controllers.
$32.80 AUD, inc GST
Similar matches
Adafruit CAN Pal - CAN Bus Transceiver - TJA1051T/3
Brand: Adafruit
If you'd like to connect a board with native CAN Peripheral support, the Adafruit CAN Pal Transceiver will take the 3V logic level signals and convert...
$7.15 AUD, inc GST
RS-232 to RS-485 Converter
Brand: DFRobot
This is a simple RS232 to RS485 converter that is self powered using the TX, RX or RTS, CTS signals for power. The RS232 is DB9 female connector, and the RS485 side is a DB9 male or 4 position terminal block.
$10.90 AUD, inc GST
RS485 Shield
Brand: DFRobot
RS485 is an industrial standard for long distance, anti-interferrence and reliable communication. So we create this RS485 shield, especially designed for the Arduino controller board. It can easily convert UART/Serial protocol to RS485 protocol. This board allows Arduino access to industrial standard protocol easily.
$15.60 AUD, inc GST
IC Hook with Pigtail
Brand: Sparkfun
These are good quality IC test hooks with a male connection wire. Instead of a single hook, these have two hooks that are capable of grabbing very small points (like SOIC IC legs). Comes in a bag of five IC hooks of different colors (black, red, white, blue, and green). We use them with the Bus Pirate logic analyzer harnesses but are very cool on their own.
$9.70 AUD, inc GST
CAN-BUS Shield V2 (Seeed Studio)
Brand: Seeed Studio
CAN-BUS is a common industrial bus because of its long travel distance, medium communication speed and high reliability.
$50.90 AUD, inc GST
Gravity: CAN to TTL Communication Module with SLCAN Protocol
Brand: DFRobot
This CAN-to-UART and USB 1.0 communication module integrates a USB interface for easy data debugging through a serial assistant. Compatible with both 3.3V...
$35.95 AUD, inc GST
Logic Pirate (Seeed Studio)
Brand: Seeed Studio
The Logic Pirate is an inexpensive, yet capable open source logic analyzer. It can sample 8 channels at 20 million samples per second, and may be overclocked...
$61.50 AUD, inc GST
M-Bus HAT for Raspberry Pi
Brand: The Pi Hut
With this M-Bus HAT, you can extend your Raspberry Pi with functions for smart metering! The HAT provides an M-Bus master to which other M-Bus devices...
$80.30 AUD, inc GST
Adafruit CAN Bus FeatherWing - MCP2515
Brand: Adafruit
CAN Bus is a small-scale networking standard, originally designed for cars and, yes, busses, but is now used for many robotics or sensor networks that...
$24.30 AUD, inc GST
CAN-BUS Shield
Brand: Sparkfun
The CAN-BUS Shield provides your Arduino or Redboard with CAN-BUS capabilities and allows you to hack your vehicle. It uses the Microchip MCP2515 CAN controller with the MCP2551 CAN transceiver. CAN connection is via a standard 9-way sub-D for use with OBD-II cable. Ideal for automative CAN application. The shield also has a uSD card holder, serial LCD connector and connector for an EM406 GPS module. These features make this shield ideal for data logging application.
$62.60 AUD, inc GST
Bus Blaster v3 acrylic case v1 (SoBv1-DP8049) (Seeed Studio)
Brand: Seeed Studio
A clear laser-cut acrylic case kit for the Bus Blaster v3. This case is designed to be simple, cheap, and easy to assemble. The Bus Blaster PCB is sandwiched...
$6.85 AUD, inc GST
SparkFun QwiicBus Kit
Brand: Sparkfun
The SparkFun QwiicBus Kit comes with everything you need to get started with the SparkFun QwiicBus system in one handy package. The kit includes two QwiicBus EndPoints...
$85.10 AUD, inc GST
Makers love reviews as much as you do, please follow this link to review the products you have purchased.