Search results for: '2.54mm pitch pin header ribbon cable'

Perfect for prototyping, the straight male header is a super common header type so grab a few and put your ideas to the test!

This 2x20 flat ribbon-cable fits the GPIO headers on the Raspberry Pi B+ so you can easily connect to the low-level peripherals and get hacking! This cable has 0.1"-spaced connectors and is keyed for polarity.

Often used for floppy drives, 34 pin IDC cables have a 2x17 array of pins. This cable will let you connect one port to another with a festive rainbow...

These 12" (30 cm) premium jumper wires are made from 26 AWG stranded copper ribbon cable with female crimp pins on both ends. Together with our 0.1" crimp...

IDC socket 2.54mm 6-pin (with strain relief clip) for use with 2×3-pin shrouded male header.

This 12" (30 cm), 6-conductor ribbon cable has a female 2×3 IDC connector on each end that is designed to plug into a 0.100" (2.54 mm) 2×3 shrouded box header. It can also be used with 0.100" male header pins.

These hard-to-find 6-pin (2×3) shrouded male headers are great general-purpose connectors and are perfect for AVR ISP programming and work with Pololu's 6-pin IDC sockets and 6-conductor ribbon cables with IDC connectors.

These 60" (150 cm) premium jumper wires are made from 22 AWG stranded copper ribbon cable with female crimp pins on both ends. Together with our 0.1"...

This is a 2x18 pin female header. Each pin has a spacing of 0.1" in-between each other.

These 60" (150 cm) premium jumper wires are made from 22 AWG stranded copper ribbon cable with female crimp pins on one end and male crimp pins on the...

These premium rainbow jumper wires are perfect for breadboarding, making wire harnesses, jumpering between headers on PCB's or basically any wiring project you can think of!

Handy for making wire harnesses or jumpering between headers on PCB's. These premium jumper wires are 3" (75mm) long and come in a 'strip' of 40 (4 pieces of each...

These 36" (90 cm) premium jumper wires are made from 22 AWG stranded copper ribbon cable with female crimp pins on both ends. Together with our 0.1" crimp...

Handy for making wire harnesses or jumpering between headers on PCB's. These premium jumper wires are 12" (300mm) long and come in a 'strip' of 40 (4 pieces of each...

Handy for making wire harnesses or jumpering between headers on PCB's. These premium jumper wires are 3" (75mm) long and come in a 'strip' of 40 (4 pieces of each...

Handy for making wire harnesses or jumpering between headers on PCB's. These premium jumper wires are 6" (150mm) long and come in a 'strip' of 40 (4 pieces of each...

Handy for making wire harnesses or jumpering between headers on PCB's. These premium jumper wires are 12" (300mm) long and come in a 'strip' of 40 (4 pieces of each...

These 60" (150 cm) premium jumper wires are made from 22 AWG stranded copper ribbon cable with male crimp pins on both ends. Together with our 0.1" crimp...

This 2x20 shrouded header has the same number and spacing of pins as the Raspberry Pi B+ so you can easily connect via ribbon cable to the low-level peripherals and get hacking! This through-hole header has 40 0.1"-spaced pins and is keyed for polarity.

These are standard 0.1" spaced header pins that can be surface mounted for applications where through-hole pins won’t work. The surface mount side of the legs are staggered for stress relief.