12V Miniature Diaphragm Pump

SKU: FIT0572 Brand: DFRobot

Retired Product

Search for an alternative
This product has been retired. It is no longer available, but this page has been kept for reference.

Introduction

This is a 12V Miniature Diaphragm Pump of great power with a wide range of applications. Drove by an electric motor, the maximum work pressure of the pump is up to 5bar(75psi) 4~6kg and its flow can reach to 4L/min.

This product can be used as a power sprayer, a small suction pump, a watering self-suction pump and so on. Features of the pump include stable performance, high efficiency and energy saving effect, low power consumption and long service life. The arrow marked on the pump represents the water outlet direction. Besides, please note that the yellow wire is the positive pole, and the black wire is the negative pole. The product comes with a silicone rubber shock absorber cushion which can reduce the impact of vibration produced during its work.

This pump is a great choice for watering flowers or changing water for fish bowls. Please note that the pump is not equipped with a water pipe or pipe joint. So you would better purchase them to satisfy your requirements.

In addition, please do not worry if you find there is water in the pump. It is normal because the pump needs to be tested before leaving the factory.

NOTE: It is forbidden to use this pump under the water because the impurities in the water outlet will have a certain effect on the pump, such as blocking the pump, reducing its pressure or even causing no water flows from the pump. For a long-term use, please install a filter on the water outlet before using the pump.

Specification

  • Power Supply: Voltage 12V/Current 3.5A
  • Pump Head: 50M
  • Flow: 4L/min
  • Power: 60W
  • Dimension: 160mm*97mm*60mm (6.30in*3.82in*2.36in)
  • Weight: 600g
  • Operating Temperature: -25℃~85℃

Parts List

  • 12V Miniature Diaphragm Pump x1

This product is listed in:

Retired

Product Comments

Exact shipping can be calculated on the view cart page (no login required).

Products that weigh more than 0.5 KG may cost more than what's shown (for example, test equipment, machines, >500mL liquids, etc).

We deliver Australia-wide with these options (depends on the final destination - you can get a quote on the view cart page):

  • $3+ for Stamped Mail (typically 10+ business days, not tracked, only available on selected small items)
  • $6+ for Standard Post (typically 6+ business days, tracked)
  • $10+ for Express Post (typically 2+ business days, tracked)
  • Pickup - Free! Only available to customers who live in the Newcastle region (must order online and only pickup after we email to notify you the order is ready). Orders placed after 2PM may not be ready until the following business day.

Non-metro addresses in WA, NT, SA & TAS can take 2+ days in addition to the above information.

Some batteries (such as LiPo) can't be shipped by Air. During checkout, Express Post and International Methods will not be an option if you have that type of battery in your shopping cart.

International Orders - the following rates are for New Zealand and will vary for other countries:

  • $11+ for Pack and Track (3+ days, tracked)
  • $16+ for Express International (2-5 days, tracked)

If you order lots of gear, the postage amount will increase based on the weight of your order.

Our physical address (here's a PDF which includes other key business details):

Unit 18, 132 Garden Grove Parade
Adamstown
NSW, 2289
Australia

Take a look at our customer service page if you have other questions such as "do we do purchase orders" (yes!) or "are prices GST inclusive" (yes they are!). We're here to help - get in touch with us to talk shop.

Have a product question? We're here to help!

Write Your Own Review

Guides

The Maker Revolution

The Maker Revolution celebrates the creation of new devices and the modification of existing ones - ...
The Maker Revolution celebrates the creation of new devices and the modification of existing ones - ...

Projects

Analogue Quad Oscillator Drone Synth

I have a peer-reviewed study on my desk and it confidently tells me that all the capacitors...
I have a peer-reviewed study on my desk and it confidently tells me that all the capacitors...

Raspberry Pi Microscope

The Raspberry Pi Microscope was put together to help with soldering PCBs that have small surface mo...
The Raspberry Pi Microscope was put together to help with soldering PCBs that have small surface mo...

Accurate IoT Clock With ESP8266

Being punctual is important. Hence accurate time is required. Clocks tend to miss out when it comes...
Being punctual is important. Hence accurate time is required. Clocks tend to miss out when it comes...
Feedback

Please continue if you would like to leave feedback for any of these topics:

  • Website features/issues
  • Content errors/improvements
  • Missing products/categories
  • Product assignments to categories
  • Search results relevance

For all other inquiries (orders status, stock levels, etc), please contact our support team for quick assistance.

Note: click continue and a draft email will be opened to edit. If you don't have an email client on your device, then send a message via the chat icon on the bottom left of our website.

Makers love reviews as much as you do, please follow this link to review the products you have purchased.