Pressure Sensor - MS5803-14BA Breakout

SKU: SEN-12909 Brand: Sparkfun
This is the MS5803-14BA Pressure Sensor Breakout, a high resolution pressure sensor with both an I2C and SPI interface. This MEMS pressure sensor measures the absolute pressure of the fluid around it which includes air, water, and anything else that acts like a viscous fluid. Depending on how you interpret the data, you can determine altitude, water depth, or any other tasks that require an accurate pressure reading. What makes the MS5803-14BA unique is the the gel membrane and antimagnetic stainless steel cap that protects against 30 bar water pressure.
$129.95 AUD, inc GST
$118.14 AUD, exc GST

Available with a lead time
Expect dispatch between Sep 15 and Sep 21

Quantity Discounts:

  • 5+ $114.59 (exc GST)
  • 25+ $112.23 (exc GST)
  • 100+ $107.50 (exc GST)

0 from local stock, supplier stock; your order will dispatch . And yes, stock levels and lead times are accurate!

Shipping:

  • $7+ Standard (5+ days*, tracked)
  • $11+ Express (2+ days*, tracked)
  • FREE Pickup (Newcastle only - must order online*)

Shipping costs may increase for heavy products or large orders.

Exact shipping can be calculated on the view cart page.

*Conditions apply, see shipping tab below.

This is the MS5803-14BA Pressure Sensor Breakout, a high resolution pressure sensor with both an I2C and SPI interface. This MEMS pressure sensor measures the absolute pressure of the fluid around it which includes air, water, and anything else that acts like a viscous fluid. Depending on how you interpret the data, you can determine altitude, water depth, or any other tasks that require an accurate pressure reading. What makes the MS5803-14BA unique is the the gel membrane and antimagnetic stainless steel cap that protects against 30 bar water pressure.

We have broken out all the pins you need including GND and 3.3V for power, SDA/SDI and SCL/SCLK for an I2C interface and SD0, AD/CS, and PS for a SPI interface. The MS5803-14BA Breakout offers a resolution range of 1 / 0.6 / 0.4 / 0.3 / 0.2 mbar. Be aware that to switch between I2C and SPI interfaces a little bit of soldering between solder pads will be required, check the hookup guide below for more information.

Features:

  • Operating Voltage - 1.8 to 3.6 V
  • Peak Supply Current - 1.4 mA
  • Operating Range - 0 to 14 bar
  • Resolution - 1 / 0.6 / 0.4 / 0.3 / 0.2 mbar
  • I2C and SPI Interface
  • Gel Protected

Documents:

This product is listed in:

Sensors>Weather>Barometric Pressure

Product Comments

Exact shipping can be calculated on the view cart page (no login required).

Products that weigh more than 0.5 KG may cost more than what's shown (for example, test equipment, machines, >500mL liquids, etc).

We deliver Australia-wide with these options (depends on the final destination - you can get a quote on the view cart page):

  • $3+ for Stamped Mail (typically 10+ business days, not tracked, only available on selected small items)
  • $7+ for Standard Post (typically 6+ business days, tracked)
  • $11+ for Express Post (typically 2+ business days, tracked)
  • Pickup - Free! Only available to customers who live in the Newcastle region (must order online and only pickup after we email to notify you the order is ready). Orders placed after 2PM may not be ready until the following business day.

Non-metro addresses in WA, NT, SA & TAS can take 2+ days in addition to the above information.

Some batteries (such as LiPo) can't be shipped by Air. During checkout, Express Post and International Methods will not be an option if you have that type of battery in your shopping cart.

International Orders - the following rates are for New Zealand and will vary for other countries:

  • $12+ for Pack and Track (3+ days, tracked)
  • $16+ for Express International (2-5 days, tracked)

If you order lots of gear, the postage amount will increase based on the weight of your order.

Our physical address (here's a PDF which includes other key business details):

40 Aruma Place
Cardiff
NSW, 2285
Australia

Take a look at our customer service page if you have other questions such as "do we do purchase orders" (yes!) or "are prices GST inclusive" (yes they are!). We're here to help - get in touch with us to talk shop.

Have a product question? We're here to help!

Write Your Own Review

Videos

View All

Guides

The Maker Revolution

The Maker Revolution celebrates the creation of new devices and the modification of existing ones - ...
#poster #infographic #maker #movement #revolution
The Maker Revolution celebrates the creation of new devices and the modification of existing ones - ...
#poster #infographic #maker #movement #revolution

Getting Hands-on with Sensors

What good is a robot if it can’t interact with the environment around it? Sensors are the back...
#camera #sensor #temperature #ultrasonic #moisture #rtc
What good is a robot if it can’t interact with the environment around it? Sensors are the back...
#camera #sensor #temperature #ultrasonic #moisture #rtc

Projects

Environment Monitor - V2

This project started due to the smoke haze that enveloped our area during the 2019 and 2020 bushfire...
#raspberry pi #zero #environment
This project started due to the smoke haze that enveloped our area during the 2019 and 2020 bushfire...
#raspberry pi #zero #environment

Rain Gauge Data Logger

Summary A Raspberry Pi 3B is used to collect digital counts from an electronic rain gauge (1mm of r...
#raspberry pi #pi #sensor #wifi #weather #rain #logger
Summary A Raspberry Pi 3B is used to collect digital counts from an electronic rain gauge (1mm of r...
#raspberry pi #pi #sensor #wifi #weather #rain #logger

ThingSpeak temperature & pressure logger

This project logs temperature and pressure observations to a ThingSpeak channel using an ESP8266 WiF...
#arduino #iot #esp8266 #wifi #bmp280 #thingspeak
This project logs temperature and pressure observations to a ThingSpeak channel using an ESP8266 WiF...
#arduino #iot #esp8266 #wifi #bmp280 #thingspeak
Feedback

Please continue if you would like to leave feedback for any of these topics:

  • Website features/issues
  • Content errors/improvements
  • Missing products/categories
  • Product assignments to categories
  • Search results relevance

For all other inquiries (orders status, stock levels, etc), please contact our support team for quick assistance.

Note: click continue and a draft email will be opened to edit. If you don't have an email client on your device, then send a message via the chat icon on the bottom left of our website.

Makers love reviews as much as you do, please follow this link to review the products you have purchased.