The WunderBar Internet of Things WiFi & Bluetooth Sensor Starter Kit is a quick start development tool for Software Application Developers unfamiliar with complex wireless hardware designing, and a complete open-source wireless hardware reference design that enables Hardware Design Engineers with a out-of-the-box development tool that helps users get started quickly building, inventing, developing, and experimenting with Internet of Things senor based designs using WiFi and BLE senor applications.
The WunderBar IoT Starter Kit from relayr mimics the appearance of a chocolate bar with a WiFi enabled master module, plus six detachable smart sensor mini-modules. Each module has Bluetooth Low Energy (BLE), a sensor or actuator, and an on-board battery. The mini-modules provide functionality including light, color, distance, noise, temperature and humidity sensing, plus an accelerometer, a gyroscope and infra-red (IR) remote control capability. The Starter Kit has available for download various software development kits (SDKs) for iOS, Android and Node.js. including test Apps which can be downloaded from relayr.io
FEATURES
• Work right way
Each module is fitted with firmware that makes it fully functional from the start. Yet it's flexible enough to allow you to configure it for your App.
• Fast and secure
Based on core technologies developed by Twitter, LinkedIn and Yahoo, the Wunderbar kit and Cloud constitute a fast, secure and scalable system.
• Energy-efficient
Each sensor module runs on a single coin cell battery that will last for at least a month. It's because of the way the firmware utilizes the BLE transmitter.
SPECIFICATION
Master module
• Main MCU: Freescale MK24FN1M0VDC12, Kinetis-K 32-bit ARM® Cortex™-M4 core with DSP instructions
• Clock Speed: 120MHz
• Flash: 1024 KB
• SRAM: 250 KB
• Gainspan GS1500M WiFi module: IEEE 802.11b/g/n, WPA/WPA2, full TCP/IP stack including SSL/TLS Nordic nRF51822 BLE (ARM® Cortex™-M0, Bluetooth 4.0 stack)
• IO: 12 exposed GPIO pads, including 4 ADC, SPI, I2C and SDIO
• 3.3V regulator including Li-Ion/Li-Po charger
• Full-speed USB w/OTG controller
• 32 kHz Xtal oscillator for RTC
Sensor modules
• SoC: Nordic nRF51822 BLE (ARM® Cortex™-M0, Bluetooth 4.0 stack)
• Clock Speed: 16MHz
• RAM: 16 KB
• Flash: 256 KB
• IO: 8 exposed GPIO pads, including SPI, I2C, TWI, UART, ADC
• 32 kHz Xtal oscillator
• One of the following sensors:
Included Sensors
• Temp / Humidity – Features HTU21D, a low power digital sensor of relative humidity and temperature.
• Accel & Gyro - Features MPU-6500 six-axis (gyro + accelerometer) MEMS MotionTracking device.
• Light / Proximity - Features TCS37717 high sensitivity RGB color sensing and proximity detector.
• IR Transmitter - Features SFH4441 high power infrared emitter, 950 nm, special package, half angle ±17 °.
• Microphone / Noise Sensor - Features SPQ0410HR5H-B, a miniature, high-performance, low power silicon microphone.
• Accessory Adapter / Bridge - Features 4-pin connector compatible for Grove add-on boards and sensors.
Dimensions: 18.6 x 29 x 6.8 mm
PART LIST
1 bar of chocolate casing + 1 circuit board + 5 cell batteries + 1 lithium battery + 1 USB cable + tacky tape
Getting Started with Wunder Bar
Install the relayr Manager App on your smartphone:
Download the SDK for your platform
If you have any questions, please visit relayr forum.
Exact shipping can be calculated on the view cart page (no login required).
Products that weigh more than 0.5 KG may cost more than what's shown (for example, test equipment, machines, >500mL liquids, etc).
We deliver Australia-wide with these options (depends on the final destination - you can get a quote on the view cart page):
Non-metro addresses in WA, NT, SA & TAS can take 2+ days in addition to the above information.
Some batteries (such as LiPo) can't be shipped by Air. During checkout, Express Post and International Methods will not be an option if you have that type of battery in your shopping cart.
International Orders - the following rates are for New Zealand and will vary for other countries:
If you order lots of gear, the postage amount will increase based on the weight of your order.
Our physical address (here's a PDF which includes other key business details):
Unit 18, 132 Garden Grove Parade
Adamstown
NSW, 2289
Australia
Take a look at our customer service page if you have other questions such as "do we do purchase orders" (yes!) or "are prices GST inclusive" (yes they are!). We're here to help - get in touch with us to talk shop.
Have a product question? We're here to help!
Makers love reviews as much as you do, please follow this link to review the products you have purchased.
Product Comments